GENERAL SUMMARY:

Under close supervision, performs entry-level duties as assigned in the installation, modification, preventative maintenance and repair of mechanical equipment or machinery used in the Minting operation.

*Maintenance Technician I may advance to the higher tech level after gained experience and demonstrated abilities.

QUALIFICATIONS:

To perform this job successfully, an individual must be able to perform each of the essential functions/duties satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

ESSENTIAL JOB FUNCTIONS:

1. Inspect, diagnose and repair faulty production machinery using a variety of hand tools, power tools and voltage meters.

2. light troubleshooting of hydraulic, pneumatic and electrical systems.

3. Follow plans/blueprints to verify material components and specifications of machinery for setup or repair.

4. Perform general plant maintenance including building, lighting and plumbing.

5. Setup machinery tooling and make any necessary adjustments for product changeovers

6. Move machinery and equipment using hoists, dollies, rollers, hand trucks and forklift.

7. Must be able to learn and use a CMMS system in the aid of daily work order requests, charge parts and failure tracking.

8. Perform weekly, monthly, yearly preventative maintenance on all machinery according to a CMMS schedule.

9. Escalate all repeat failures and non-basic maintenance issues in timely manner to assigned lead or Maintenance Supervisor.

10. Perform general housekeeping and cleanup sometimes to the aid of higher-level techs.

11. Ability to be read, write and communicate effectively and understand basic math.

12. Ability to demonstrate predictable, reliable and timely attendance.

13. Ability to work as part of a team; interact appropriately with others.

Helpful Experience:

• Experience with preventative maintenance – Fluids, filters and lubes.

• Experience with gearboxes -rebuilds, ratios, alignments.

• Experience with conveyors – setup, motors, sprockets and belts.

• Experience with cooling towers – strainers, filters, pumps, general upkeep.

• Experience with light electrical trouble shooting – check fuses, contactor overloads, motor wiring and ground faults.

• Experience with following direction and paying attention to details.

LANGUAGE SKILLS:

Ability to read, write, and communicate effectively.

PHYSICAL REQUIREMENT:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions:

While performing the duties of this job, the employee is regularly required to stand, bend or kneel. The employee is continuously required to use hands and arms to reach, finger, handle, or feel objects and controls. The employee is regularly required to walk, talk and hear.

The employee must regularly lift 75 pounds. Specific vision abilities required by this job include close peripheral vision, depth perception, and the ability to adjust focus.

Seeing: 75-100% of the time

Hearing: 75-100% of the time

Standing/Walking/Mobility: 75-100% of the time

Sitting: 25-49% of the time

Climbing/Stooping/Kneeling/Bending: 50-74% of the time

Lifting/Pulling/Pushing: 50-74% of the time
(Must be able to lift 75 lbs. regularly)

Grasping, using hands, arms, fingers: 75-100% of the time

Communication: 75-100% of the time

Work Environment:

The work environment is of moderate temperature and moderately loud noise level; hearing protection is required while working on the manufacturing floor. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

As a Maintenance Technician, an employee will work in a cool to extremely hot environment, dependent upon project, outdoor work may be performed. There is exposure to fuels, oils, cleaning solvents and fumes from machinery. Safety glasses must be worn at all times while in the Maintenance area and while working on machinery. The noise level in the work environment varies depending upon project, hearing protection is required. Additional safety equipment may be required.

Job Type: Full-time

Salary: $28.00 per hour

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Vision insurance

Schedule:

• 12 hour shift
• Night shift
• Overtime
• Weekends as needed

Work setting:

• In-person

Education:

• High school or equivalent (Preferred)

Experience:

• Manufacturing: 1 year (Required)
• Mechanical knowledge: 1 year (Required)

Work Location: In person