In this job you will mold a variety of epoxy parts and may perform other tasks such as sandblasting and painting of molded epoxy parts.

You will work in a production environment, engage in continuous productive activity, and must meet requirements within time constraints driven by machine cycles ranging from 7 minutes to 22 minutes.

Tasks require a high degree of eye-hand coordination, manual dexterity, and the use of both hands and arms on a repetitive basis for a full range of motion.

You will frequently use hand and power tools such as knives, scrapers, engravers and air-impact tools.

The work associated with this job includes but is not limited to the following :

• Cleaning molds to prepare them for production cycle.
• Using a variety of rods, spacers and inserts to set up molding machines to produce epoxy insulators ranging from 21 lbs.

to 40 lbs. in weight. (Lengths range from 2 inches to 2 feet.).

• Cycling molding machine and monitoring its progress while performing secondary operations such as deflashing, inspection, visual and mechanical application of lubricating grease, and packaging of finished product.
• Transporting tubs of inserts and finished molded parts.
• Sandblasting and paint parts.
• Proficiency in using simple material handling equipment, hand tools, power tools, and simple gauges and instruments to check critical dimensions.
• In this job, you must participate in a medical surveillance program coordinated by S&C's health service professionals.

To select this job as one of interest to you, at a minimum, you must have the following :

• Ability to use basic math.
• Ability to work from ordinary drawings and specifications.
• Ability to use a variety of hand-held tools and air-impact tools.

Relevant Experience Required : Less than one year experience.

MAJOR PHYSICAL DEMANDS

• Standing : Most tasks are performed in a standing position with intermittent walking.
• Lifting : Frequent lifting of items ranging in weight from 5 lbs. to 50 lbs.
• Walking : Occasional walking moderate distances (less than 1 / 8 mile).
• Carrying : Frequent carrying of items ranging in weight from 5 lbs. to 25 lbs.
• Pushing : Occasional use of hand truck to move parts a moderate distance.
• Pulling : Occasional use of hand truck to move parts a moderate distance.
• Bending : Occasional bending required to complete the packing tasks.
• Handling : Continuous handling of parts ranging from 5 lbs. to 50 lbs. along with a variety of hand tools.
• Other : Respirator certification required.

Last updated : 2024-05-13