You haven't searched anything yet.
Summary / Objective
Validation that finished goods being manufactured are of correct dimension, thickness, blend and meet all internal or customer supplied tolerance and specifications. Documentation of raw material lot#, equipment settings and photos of finished good roll quality. Inspection of packaging materials and configurations used to ensure products are kept free and clear of damage. Collection, labeling, logging and submittal of required samples needed for testing by Lab Assigned Quality Technicians. Control of all non-conforming finished goods that do not meet the requirements set forth internally or by the customer. Control of all non-conforming raw materials that may cause non-conforming finished goods to be manufactured. Creation and reporting of customer required certificates of analysis, accurately labeling and logging samples that may be submitted to customers per their requirements. Maintaining the Quality Lab in good working order: floors swept daily, counter-tops wiped clean of dust and debris daily, equipment wiped clean of dust and debris daily, trash removed daily. Ensuring that the testing equipment is with-in calibration and zero’d for use according to testing procedures. Testing completed within the guidelines determined by ASTM or MSE methods. Maintaining a professional working environment and appearance as mandated in the MSE employee handbook. Upholding the safety requirements within the MSE employee handbook.
Essential Functions
Must have a working knowledge of all production line blenders and silo locations.
Must be familiar with Job Travelers and Engineering PDF’s which give instructions of how to manufacture finished goods according to internal or customer specifications.
Must know how to complete a Product Validation form, save the information in the Quality One drive and report the information gathered by using an issued Surface tablet.
Must know how to safely operate a fork truck and pass the requirements needed to obtain an MSE issued license.
Must have a working knowledge of all lab equipment
Ability to determine product requirements are being met by testing against provided tolerances and specifications, the review of results and/or visual inspection of manufactured goods.
Ability to conduct test according to the following ASTM/MSE Standards:
Gauge ProfileASTM D 5947
Coefficient of FrictionASTM D 1894
Elmendorf TearASTM D 1922
ElongationASTM D 882
Tensile YieldASTM D 882
Tensile UltimateASTM D 882
1% Secant ModulusASTM D 882
Dart ImpactASTM D 1709 A & B
Surface TensionASTM D 2578
OpacityMSE Method
HazeASTM D 1003
ShrinkMSE Method
Melt Flow IndexASTM D 1238
Test results are logged, documented and reported in an accurate manner to senior management.
Sample retains to be accurately marked and stored in the designated areas.
Ensure finished goods are being packaged according to the appropriate standard operating procedure (SOP) for that product class.
Maintain the lab and testing equipment in good working order, ensuring that inside the lab as well as outside the lab is clean of debris, trash and dust that could affect the results of any of the performed tests.
Report to work and maintain good time management and diligent work practices during the duration of the assigned work schedule.
At all times abide by the safety requirements as outlined within the MSE Employee Handbook.
Personal Protective Equipment required are safety glasses and/or side shields, steel toed shoes and ear protection in designated areas.
At all times abide by all requirements as outlined within the MSE Employee Handbook.
Effectively produce films on the QC Lab line that are free of melt fracture or wrinkle and are manufactured to an instructed mil thickness and blow-up-ratio, which are of a specified blend.
Provide samples and/or test data from lab line films that will better inform senior management and/or customers of production grade products
Use basic computer skills in Microsoft software to create, open, format, save, retrieve, and populate documents with Word, Excel, and Outlook. Create folders to sort and save data associated with testing. Routinely use spell and grammar check software(e.g., Grammarly) on all communications.
Ability to issue Certificate of Analysis as instructed by customer request, by pulling test data and merging information into the appropriate template in a timely and accurate manner.
Accurately document and mark with the appropriate identification number all competitive films submitted for testing and reporting purposes.
Complete examination and documentation of all physical attributes of competitive films, accurately documenting any noticeable differences between both sides of the film surface, vent types and patterns, print schematics, colors, placement, repeat.
Documentation and reporting of all submitted customer supplied information relative to the performance/requirements of films.
You must conform with PPE requirements and Safety Rules.
PPE requirements and Safety Rules
Eye protection is required everywhere in the plant
Hearing protection is required when crossing the blue lines that are painted on the floor, heading towards the machines
Safety toed shoes or boots are required everywhere in the plant.
Cut gloves are required to be worn on the opposite hand you use to hold a knife when cutting.
Maximum weight allowed to be lifted by one person is 80 pounds. Anything heavier requires the aid from another person, fork lift, big joe, or roll handlers.
Face shields are required to be worn anytime you are over the die during start-up.
Each machine is equipped with multiple safety switches and devices. Although the features are not the same for each machine, they all have safety devices in place to help protect you. These include, pressure sensitive mats, light curtains, pull cords, and emergency stop buttons.
Work Environment
This job operates in both an office and plant setting. This role routinely uses standard office equipment.Employee may be exposed to extreme conditions.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee must be able to lift and/or move up-to but no more than 80 lbs. This position is very active and requires standing, walking, bending, kneeling and stooping. (Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and essential functions).
Position Type & Expected Hours of Work
This is a full-time, hourly position. Work are 8:00 a.m. to 8:00 p.m., and 8:00 p.m. to 8:00 a.m., on a rotating monthly schedule. Work week is based on a seven-day cycle and days/nights are varied every other week. The employee will work 36 and 48 hours, respectively. This position requires work on weekends and holidays and some overtime is required.
Education and Experience
High School Diploma or GED required; some college preferred. There is no time frame for skill level position increase; the Technician must prove skills/knowledge before advancement and have Quality Management and Executive Management Approval for multi-step increases.
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
Reasonable accommodations can be made for Qualified ADA disabilities if they assist in enabling the employee to perform the essential functions and duties of this position.
*Mid-South is an equal opportunities employer. We want applicants of diverse background and hire without regard to race, color, gender, religion, national origin, ancestry, citizenship, disability, age, sexual orientation, or any other characteristic protected by law.
Full Time
Durable Manufacturing
$40k-51k (estimate)
07/19/2023
06/06/2024
midsouthextrusion.com
MONROE, LA
100 - 200
Private
MARK ANDERSON
$10M - $50M
Durable Manufacturing
The job skills required for Quality Technician Shift include Calibration, Packaging, Analysis, Visual Inspection, Time Management, etc. Having related job skills and expertise will give you an advantage when applying to be a Quality Technician Shift. That makes you unique and can impact how much salary you can get paid. Below are job openings related to skills required by Quality Technician Shift. Select any job title you are interested in and start to search job requirements.
The following is the career advancement route for Quality Technician Shift positions, which can be used as a reference in future career path planning. As a Quality Technician Shift, it can be promoted into senior positions as a Food Safety Manager that are expected to handle more key tasks, people in this role will get a higher salary paid than an ordinary Quality Technician Shift. You can explore the career advancement for a Quality Technician Shift below and select your interested title to get hiring information.
If you are interested in becoming a Quality Technician, you need to understand the job requirements and the detailed related responsibilities. Of course, a good educational background and an applicable major will also help in job hunting. Below are some tips on how to become a Quality Technician for your reference.
Step 1: Understand the job description and responsibilities of an Accountant.
Quotes from people on Quality Technician job description and responsibilities
Run quality checks for the outputs, create findings reports, and strategize methodologies to enhance stability by utilizing standard testing parameters.
01/25/2022: Cedar Falls, IA
Quality technicians prevent unsatisfactory products from reaching the shelves by examining materials for flaws and deviations from original product specifications.
01/11/2022: Boise, ID
They take measurements and check for quality using scales, visual examinations, and taste tests.
12/29/2021: Modesto, CA
To monitor and assist to ensure that all Quality checks are completed and documented by the offline Quality team.
12/20/2021: Moline, IL
Coordinated quality control objectives and activities to resolve production problems, maximize product reliability, and minimize cost.
01/13/2022: Concord, NH
Step 2: Knowing the best tips for becoming an Accountant can help you explore the needs of the position and prepare for the job-related knowledge well ahead of time.
Career tips from people on Quality Technician jobs
Most quality technicians are provided with on-the-job training but require a keen eye for detail and the ability to focus for long periods.
01/06/2022: Elyria, OH
For example, they could start out with a role such as Quality technician, progress to a title such as Quality Manager and then eventually end up with the title Director Of Quality.
01/12/2022: Gastonia, NC
Most quality technicians are provided with on-the-job training but require a keen eye for detail and the ability to focus for long periods.
12/30/2021: Lawrence, MA
You must have the ability to work closely with various levels of the organization to ensure quality requirements are achieved, so focus on it.
01/19/2022: Milwaukee, WI
Technicians are required to understand a couple areas, like quality control, blueprint reading, performing ‘pass/fail’ tests and reporting test results.
01/14/2022: Boulder, CO