Hi All
anyone might be interested. Those Who Are interested & Available Share Resume Along with Minimum pay rate looking for on w2/1099. do you have Employer Share Employer Contact Number Email id.
Title1: Embedded Software Engineer_ Troy, MI(Onsite)
JD:
Generic
5 yrs
•Bachelor's degree in computer engineering, Computer Science or Embedded Systems
o5 years of software development/coding experience with low level embedded C or C
•Experience with Infineon TC3x AURIX MCU or equivalent multi-core lockstep microcontrollers
•Experience in automotive applications and applicable interfaces such as CAN, CAN-FD, SPI, FlexRay
•Experience in trouble-shooting & debugging skills both on the test bench and in vehicle
•Experience in diagnostics and UDS services, CANdela Studio, Vector & ETAS Tools, and integration of CAN Stack software components, low level drivers and MCAL MCU peripheral configurations is required
•Experience with AUTOSAR 4.x architecture and detail understanding of major AUTOSAR components
•Experience with SW debugger tools such as Lauterbach Trace32
Responsibilities:
•Develop base software; MCAL, service layers, AUTOSAR interfaces, and complex device drivers in new ECU's for electrified drivetrain systems
•Develop, configure and integrate embedded software around bootloader & base software utilizing AUTOSAR RTE Design low level drivers and base software services (e.g. Diagnostic Manager, Communication Manager, Task Manager, Diagnostics Communication Services, Service Routines, Fail-Safe Modes, complex I/O drivers)
•Support defining test cases for Fault Management & Diagnostics, Performance & Timing, Integrated S/W
•Design and development of production intent software within an ALM environment like Polarion
•Design software for compliance to ISO26262 Functional Safety
•Support software validation engineer through the development process and iterate code accordingly
•Perform software functional validation testing on bench (SIL/HIL)
Title2: Software Engineer_ Auburn Hills, MI (Onsite)
Job Description:
SOC experience (TI TDA4 or any other SOC), TI SDK, QNX or GHS Integrity, Embedded Linux, Automotive Domain Experience and Architecture Experience Will Be added Advantage.
1.Development (design, implement, test and debug) of core and/or application specific software requirements for automotive embedded electronic module serial production projects
2.Involvement in all phases of the Software Development Life Cycle (SDLC). Develop software in compliance with a formal ASPICE/CMMi based Global Product Engineering Process (GPEP).
3.10 plus years of embedded experience in SW development including requirements, Design and Implementation with embedded C/C programming.
4.Engineer should have experience SOC experience (TI TDA4 or any other SOC ).
5.ADAS domain experience is a plus.
6.Engineers should have knowledge on following integration activities (At least one is mandatory).
a.TI SDK
b.QNX OR GHS integrity or equivalent safety linux
c.Safe RTOS
7.Camera Image pipelining knowledge is a plus.
8.SW Reprograming experience (Boot SW) is a plus.
9.Board bring up, UART/I2C/Ethernet or any other Driver development experience is required.
10.SW architecture development experience using UML or any other tools like Enterprise architecture, Rhapsody and etc.
11.Experience with configuration management PTC, GIT and etc
12.Knowledge of software test tools such as Vector CAST, Cantata, Tessy, RTRT, google test
13.Troubleshooting and debugging skills
14.Knowledge of structured problem solving (8D) methods and/or techniques
15.Experience developing and debugging applications or device drivers on embedded Linux.
16.Experience in programming with C/C .
17.Strong understanding of modern SoC architectures, operating system fundamentals, hardware/software interfaces, and abstractions.
18.Experience with Linux device drivers for hardware blocks such as , C camera Serial Interface (CSI), Image Signal Processor (ISP) , Ethernet, UFS, or PCIe.
19.Experience with embedded Linux distribution systems like Yocto or Buildroot .
Title3: EV Test Engineer_ Auburn Hills, MI (Onsite)
Description.
We are looking for someone with electric vehicle testing experience so electrification testing experience building test beds will Be added Advantage.
Power Electronics Systems testing for electric vehicle under various conditions.
•This kind of automated test bed development with E-Motor batteries chargers inverters dc-dc converters various switching
oDevices battery hub,
ocontrol devices,
odata logging,
osoftware and hardware validation,
oHardware Software emulation,
oBMS,
oPower supplies,
oEloads,
osimulate various loads in the loop heaters,
oresistors,
oinductive loads motors,
oHIL/SIL/MIL/XIL,
opower systems automation experience Python or AVL Puma, or FEV Flexlab Morphee, or A&D software experience beneficial.
•Writing SOW for Test Equipments like;
oBattery Low Voltage Cell Cyclers,
oMedium voltage Module testers,
oHigh and Medium Voltage Pack Testers,
oCharging Testing Equipments,
oHigh to low Power Supplies – Parralleling,
oRequirements Development,
oTemperature-Humidity Chambers,
oSalt Fog/Spray Cyclic Equipment,
oVibration with AGREE chambers,
oAir water cooled devices,
oEUCAR standards, PLC,
oDAQ hardware,
oNetworking CAN/LIN/AE Ethernet,
oAutomation I/O,
oControls Equipment,
oEthernet Switches,
oSafety Relay,
otemp current voltage sensors analog and digital inputs,
oFunction Generators,
oFPGA based digital control circuits,
oGalvanic isolation,
oSafety needs connecting equipments to building management systems HVAC and various sensors, chillers, heaters, sprinkling systems, scripting.
•Plans, develops, and conducts tests on electronic components, products, and systems, applying knowledge and principles of electronic theory, testing methodology and procedures. Like Battery, Motors, Trolling Motor Parts, etc...
•Test-Analysis Correlation. Correlation between test results and FEA results.
•Electronic components knowledge, soldering & instruments Usage.
•Test Planning: Develop test plans and strategies to validate hardware components or products, considering design specifications and requirements.
•Test Development: Create test cases and test procedures for various hardware components, including circuit boards, processors, sensors, and other electronic devices.
•Test Execution: Conduct tests and experiments to evaluate the performance, functionality, and reliability of hardware products.
•Data Analysis: Collect and analyse test data to identify defects, anomalies, and areas for improvement. Interpret and report results.
•Troubleshooting: Diagnose and debug hardware issues, often working closely with design and development teams to resolve problems.
•Documentation: Maintain detailed records of test processes, results, and findings. Create test reports and documentation for stakeholders.
•Quality Assurance: Ensure that hardware products meet quality and safety standards, as well as regulatory compliance (e.g., safety and EMC standards).
•Continuous Improvement: Continuously seek opportunities to enhance testing methodologies, equipment, and processes for improved efficiency and accuracy.
Thanks & Regards:
Vishwajeet
vishwajeet.kumar@prolim.com

About the Company:
PROLIM Corporation

PROLIM is a leading provider of end-to-end IT, PLM and Engineering Services and Solutions for Global 1000 companies. They understand business as much as technology, and help their customers improve their profitability and efficiency by providing high value technology consulting, staffing, and project management outsourcing services.

Their IT and PLM consulting offerings include; Advisory, PLM Software/Services, Program Management, Solution Architecture Training/Staffing, Cloud Solutions, Servers/Networking, Infrastructure, ERP Practices and QA Services. Engineering services include Data Translation, CAD/CAM/CAE, Process & Product Engineering, Prototyping, and Testing/Validation within a wide range of markets and industries.

Company Size:
100 to 499 employees

Industry:
Computer/IT Services

Founded:
2005

Website:
https://www.prolim.com/