What are the responsibilities and job description for the Programming Engineer position at L&T Technology Services Ltd.?
LTTS US Branch
Pineville, Louisiana
Job Description
Skills:
• Provide support for installation, commissioning, start-up and troubleshooting for various control and automation projects.
- Design Control System Architecture (CSA).
- Design electrical & control panel layout, control schematic drawings and Bill of Material (BOM).
- Design, review and perform safety validation, safety maps, IQ/OQ, documents for new equipment installation at site.
- Review vendor & engineering documents as per project requirement.
- Provide support for PLC and HMI programming.
- Development and Modification of PLC program.
- Development of SCADA project as per customer needs.
- Integration of Equipment system in the Plant.
- Support Operation team for existing system.
- Work with Project/Engineering team for new system.
- Design feasibility study design basis document and detail engineering technical documents Cable schedule, Device List/ Tag List for new equipment / machine.
- Understand the electrical drawings, P&IDs.
- Perform Yellow lining, IQOQ, troubleshoot electrical circuits.
- Understand the existing control system and provide support to reduce the current losses.
- Design control study / URD (User Required Document) for the PLC & HMI programming.
- Understand and Integrate Different systems in the plant.
- Help the team understand the cause of loss based on historical data.
- Design and review technical documents, such as engineering information, for the fabricator/contractor's activities to be performed in sequence at the site for site clearance and new installation.
- Deliver complex, large-scale projects on time and within the budget in compliance with NEC, NFPA79, OSHA, S88, and PackML Standards.
- Perform multi-discipline and vendor co-ordination for new equipment installation.
Job Description & Skill Requirement:
- PLC & HMI Programming:
o Rockwell Software - Studio5000 & RSLogix5000, FTView Machine Edition and Site Edition, Connected Component Workbench
o Wonderware, Archestra
- Control Hardware:
o Rockwell PLCs e.g. GuardLogix, ControlLogix, CompactLogix, SLC500, Panel View Plus HMIs, Point I/O, Power Flex 520 Series VFDs, Power Flex 7 Class, Power Flex 4 Class,
- Communication Networks -Ethernet, Profinet, Profibus, Modbus etc.
- Machine level automation experience, Motion - Kinetix programming, experience with CPG, FMCG customer.
- 5 Years of Experience.
- PLC & HMI Programming:
- Electrical & Control Drawing Software - AutoCAD
- Experience with Making (Process), or Packing system.
Programming Standards:
- Ladder, FBD (Functional Block Diagram),
- PackML (Packing Machine Language),
- Safety PLC Programming
- Microsoft Tools: Windows 7, Windows 10, MS Excel, MS Word, MS PowerPoint, MS Outlook; VM Ware
- Machine safety requirements and implementation (safety relays and circuits), including NFPA79 and CBA 2050.
- Knowledge of NFPA 70E requirements and experience with associated electrical PPE.
- Strong work ethic and initiative; can plan and execute work with minimal direction. Works well with peers and 'customers'; collaborative and responsive. Ability to learn faster.
- Manufacturing, Packing, Making, and Facilities experience, including installation, maintenance, troubleshooting, and optimization.
- Support execution from concept through validation to startup activities.
Qualification:
- Engineering (BE /B.Tech /BS/MS)
Job Requirement
Skills:
• Provide support for installation, commissioning, start-up and troubleshooting for various control and automation projects.
- Design Control System Architecture (CSA).
- Design electrical & control panel layout, control schematic drawings and Bill of Material (BOM).
- Design, review and perform safety validation, safety maps, IQ/OQ, documents for new equipment installation at site.
- Review vendor & engineering documents as per project requirement.
- Provide support for PLC and HMI programming.
- Development and Modification of PLC program.
- Development of SCADA project as per customer needs.
- Integration of Equipment system in the Plant.
- Support Operation team for existing system.
- Work with Project/Engineering team for new system.
- Design feasibility study design basis document and detail engineering technical documents Cable schedule, Device List/ Tag List for new equipment / machine.
- Understand the electrical drawings, P&IDs.
- Perform Yellow lining, IQOQ, troubleshoot electrical circuits.
- Understand the existing control system and provide support to reduce the current losses.
- Design control study / URD (User Required Document) for the PLC & HMI programming.
- Understand and Integrate Different systems in the plant.
- Help the team understand the cause of loss based on historical data.
- Design and review technical documents, such as engineering information, for the fabricator/contractor's activities to be performed in sequence at the site for site clearance and new installation.
- Deliver complex, large-scale projects on time and within the budget in compliance with NEC, NFPA79, OSHA, S88, and PackML Standards.
- Perform multi-discipline and vendor co-ordination for new equipment installation.
Job Description & Skill Requirement:
- PLC & HMI Programming:
o Rockwell Software - Studio5000 & RSLogix5000, FTView Machine Edition and Site Edition, Connected Component Workbench
o Wonderware, Archestra
- Control Hardware:
o Rockwell PLCs e.g. GuardLogix, ControlLogix, CompactLogix, SLC500, Panel View Plus HMIs, Point I/O, Power Flex 520 Series VFDs, Power Flex 7 Class, Power Flex 4 Class,
- Communication Networks -Ethernet, Profinet, Profibus, Modbus etc.
- Machine level automation experience, Motion - Kinetix programming, experience with CPG, FMCG customer.
- 5 Years of Experience.
- PLC & HMI Programming:
- Electrical & Control Drawing Software - AutoCAD
- Experience with Making (Process), or Packing system.
Programming Standards:
- Ladder, FBD (Functional Block Diagram),
- PackML (Packing Machine Language),
- Safety PLC Programming
- Microsoft Tools: Windows 7, Windows 10, MS Excel, MS Word, MS PowerPoint, MS Outlook; VM Ware
- Machine safety requirements and implementation (safety relays and circuits), including NFPA79 and CBA 2050.
- Knowledge of NFPA 70E requirements and experience with associated electrical PPE.
- Strong work ethic and initiative; can plan and execute work with minimal direction. Works well with peers and 'customers'; collaborative and responsive. Ability to learn faster.
- Manufacturing, Packing, Making, and Facilities experience, including installation, maintenance, troubleshooting, and optimization.
- Support execution from concept through validation to startup activities.
Qualification:
- Engineering (BE /B.Tech /BS/MS)