What are the responsibilities and job description for the Team Associate Assembly position at Current Lighting Employee Co LLC?
JOB POSTING
Team Associate Assembly
Pay Level
C
15
15 Positions Available
Manufacturing production workers must be willing to perform working in a team enviro
n
ment
while
adhering to all attendance and safety rules, regulations & equipment requirements.
General Duties:
Perform assembly operation of a repetitive nature requiring the handling of heavy parts and/or
responsibility
& skill to transfer, operate, or adjust production equipment.
Job will require employee
to rotate between various production assignments. May use a wide
range of hand & power tools to assemble, check, adjust or repair on assigned jobs including,
but is not limited to:
Progressive assembly line work
Sub
assembly work
Handling of parts or materials (up to 35 pounds)
Driving screws and/or assembling other fasteners
Assembling/applying tape, insulation, or other materials
Assembling/fastening wire harnesses, terminating wires, etc.
Check, adjust or repair sub
assemblies
Check, adjust or repair final assemblies
Testing and/or packaging of sub or final assemblies
In
line checking or reporting for critical appearance defects in major assemblies, sub
assemblies, or other major components
Repetitive use of vibrating tools and air guns
Repetitive motion work
Essential Functions/Responsibilities:
Assemble housing, optical, or combined luminaire using tools and fixture.
May work on a build complete cell or on an assembly line.
Obtain and work from Bills of Material, parts lists, wiring diagrams and other
documentation, or instructions.
Gather material, assemble, and test on computer
controlled test equipment.
Pack, operate equipment, and rework fixtures as required.
Follow appropriate Manufacturing Control Plan (MCP) and sign off as required.
Responsible for participating in applicable plant Safety Programs and promoting a safe
work environment.
Standing, lifting, twisting, and turning in a fast
paced environment
Exhibit good communication skills and operate as a team
Perform related duties as assigned
Qualifications/Requirements:
Must have
6
months'
work history
through
staffing agency
at Current
Lighting
.
Must be
at least
18 years of age
Must pass background check and
drug screen
Legally authorized to work in the U.S.
Must be able to work overtime
Must be able to work weekend shifts and occasional holidays
Must be able to wear personal protective equipment, for example safety glasses,
gloves, hats, and safety shoes
Must speak English proficiently and have the ability to follow verbal and written
instructions in English
Ability to work in a tobacco
free environment
With or without reasonable accommodation, must be able to lift/carry 35 lbs.
With or without reasonable accommodation, must be able to stand for long periods of
time up to 7 hours or 80% of a shift (with the exception of a 30
minute lunch break
and two 10
minute breaks)
Desired Characteristics:
Prior manufacturing experience
Prior lighting fixture assembly experience
High School Diploma, general education degree (GED), or Equivalent
o
Note: Required for permanent employment
Environment:
Conditions: indoors, good lighting, cement floors with ergonomic mats to stand on,
good ventilation, temperature ranges from 65 to 85 degrees, noise, and proximity to
moving objects.
Length of shift: 8 ½ hours
,
1st shift (7 AM to 3:30 PM) and 2nd shift (3:30 PM to 12
AM)
with a 30
minute lunch and two 10
minute breaks.
Additional Information
Current Lighting
is an Equal Opportunity Employer. We do not discriminate on the basis of
race,
religion, color, sex, gender identity, sexual orientation, age, non
disqualifying physical or mental
disability, national origin, veteran status, or any other basis covered by law. All employment is
decided on the basis of qualifications, merit, and
business need.
Responsibilities include:
Assembly of housings, terminal boards, leads, installation of internal components,
glass and doors to complete the final product. This involves standing, lifting, pulling,
carrying, bending/stooping, reaching, head and neck motion, and handling. The tool
s
involved include the tool balancer, a suction lifter, and rolling cart with a hydraulic
height adjuster. The assembly line is set up at a height of 31". All employees must
wear steel toed boots and protective eyewear and gloves. Protective earplugs ar
e
provided if they would like them but are not mandatory. The lines start by unloading
housings from a cart which involves the employee pivoting 90 or 180 degrees
(depending on the production line), reaching for the housing, and then placing it to the
ass
embly line. Once on the line, each member of the team works on the housing to
complete the fixture. They have electronic, low torque, retractable screw drivers that
are suspended overhead and can easily be pulled down to assist with assembly.
Supplies r
equired for assembly are positioned in bins in front of employees at chest
height. The housing moves down the line on a frictionless surface of rollers. Finally,
the fixture is tested and then packed. The packer stands
,
picks up a box from a stack
located at the pack station
,
fill
s
box with pack material and the fully assembled
housing, and then runs it through the automatic sealing/taping device. Once the box is
assembled and sealed, it is lifted by hand or with a suction lift and taken to a nearby
pall
et until it can be taken to the shipping dock via forklift.
- Other tasks
JOB POSTING
Team Associate Assembly
Pay Level
C
15
15 Positions Available
Manufacturing production workers must be willing to perform working in a team enviro
n
ment
while
adhering to all attendance and safety rules, regulations & equipment requirements.
General Duties:
Perform assembly operation of a repetitive nature requiring the handling of heavy parts and/or
responsibility
& skill to transfer, operate, or adjust production equipment.
Job will require employee
to rotate between various production assignments. May use a wide
range of hand & power tools to assemble, check, adjust or repair on assigned jobs including,
but is not limited to:
Progressive assembly line work
Sub
assembly work
Handling of parts or materials (up to 35 pounds)
Driving screws and/or assembling other fasteners
Assembling/applying tape, insulation, or other materials
Assembling/fastening wire harnesses, terminating wires, etc.
Check, adjust or repair sub
assemblies
Check, adjust or repair final assemblies
Testing and/or packaging of sub or final assemblies
In
line checking or reporting for critical appearance defects in major assemblies, sub
assemblies, or other major components
Repetitive use of vibrating tools and air guns
Repetitive motion work
Essential Functions/Responsibilities:
Assemble housing, optical, or combined luminaire using tools and fixture.
May work on a build complete cell or on an assembly line.
Obtain and work from Bills of Material, parts lists, wiring diagrams and other
documentation, or instructions.
Gather material, assemble, and test on computer
controlled test equipment.
Pack, operate equipment, and rework fixtures as required.
Follow appropriate Manufacturing Control Plan (MCP) and sign off as required.
Responsible for participating in applicable plant Safety Programs and promoting a safe
work environment.
Standing, lifting, twisting, and turning in a fast
paced environment
Exhibit good communication skills and operate as a team
Perform related duties as assigned
Qualifications/Requirements:
Must have
6
months'
work history
through
staffing agency
at Current
Lighting
.
Must be
at least
18 years of age
Must pass background check and
drug screen
Legally authorized to work in the U.S.
Must be able to work overtime
Must be able to work weekend shifts and occasional holidays
Must be able to wear personal protective equipment, for example safety glasses,
gloves, hats, and safety shoes
Must speak English proficiently and have the ability to follow verbal and written
instructions in English
Ability to work in a tobacco
free environment
With or without reasonable accommodation, must be able to lift/carry 35 lbs.
With or without reasonable accommodation, must be able to stand for long periods of
time up to 7 hours or 80% of a shift (with the exception of a 30
minute lunch break
and two 10
minute breaks)
Desired Characteristics:
Prior manufacturing experience
Prior lighting fixture assembly experience
High School Diploma, general education degree (GED), or Equivalent
o
Note: Required for permanent employment
Environment:
Conditions: indoors, good lighting, cement floors with ergonomic mats to stand on,
good ventilation, temperature ranges from 65 to 85 degrees, noise, and proximity to
moving objects.
Length of shift: 8 ½ hours
,
1st shift (7 AM to 3:30 PM) and 2nd shift (3:30 PM to 12
AM)
with a 30
minute lunch and two 10
minute breaks.
Additional Information
Current Lighting
is an Equal Opportunity Employer. We do not discriminate on the basis of
race,
religion, color, sex, gender identity, sexual orientation, age, non
disqualifying physical or mental
disability, national origin, veteran status, or any other basis covered by law. All employment is
decided on the basis of qualifications, merit, and
business need.
Responsibilities include:
Assembly of housings, terminal boards, leads, installation of internal components,
glass and doors to complete the final product. This involves standing, lifting, pulling,
carrying, bending/stooping, reaching, head and neck motion, and handling. The tool
s
involved include the tool balancer, a suction lifter, and rolling cart with a hydraulic
height adjuster. The assembly line is set up at a height of 31". All employees must
wear steel toed boots and protective eyewear and gloves. Protective earplugs ar
e
provided if they would like them but are not mandatory. The lines start by unloading
housings from a cart which involves the employee pivoting 90 or 180 degrees
(depending on the production line), reaching for the housing, and then placing it to the
ass
embly line. Once on the line, each member of the team works on the housing to
complete the fixture. They have electronic, low torque, retractable screw drivers that
are suspended overhead and can easily be pulled down to assist with assembly.
Supplies r
equired for assembly are positioned in bins in front of employees at chest
height. The housing moves down the line on a frictionless surface of rollers. Finally,
the fixture is tested and then packed. The packer stands
,
picks up a box from a stack
located at the pack station
,
fill
s
box with pack material and the fully assembled
housing, and then runs it through the automatic sealing/taping device. Once the box is
assembled and sealed, it is lifted by hand or with a suction lift and taken to a nearby
pall
et until it can be taken to the shipping dock via forklift.
- Other tasks that assist the production line are walking to get the containers of
housings or carts with components on them and pushing the carts to the lines. This is
sometimes done by line members and sometimes completed by other employees.
- All movements are ergonomically sound with forces minimized through hydraulics.
The screwdrivers have arm rests to minimize wrist forces. The greatest stress is
standing and fine motor tasks of assembly. The surface they stand on is ergonomic
mattin
g.
JOB POSTING
Team Associate Assembly
Pay Level C15
15 Positions Available
Manufacturing production workers must be willing to perform working in a team environment while adhering to all attendance and safety rules, regulations & equipment requirements.
General Duties:
Perform assembly operation of a repetitive nature requiring the handling of heavy parts and/or responsibility & skill to transfer, operate, or adjust production equipment.
Job will require employee to rotate between various production assignments. May use a wide range of hand & power tools to assemble, check, adjust or repair on assigned jobs including, but is not limited to:
- Progressive assembly line work
- Sub-assembly work
- Handling of parts or materials (up to 35 pounds)
- Driving screws and/or assembling other fasteners
- Assembling/applying tape, insulation, or other materials
- Assembling/fastening wire harnesses, terminating wires, etc.
- Check, adjust or repair sub-assemblies
- Check, adjust or repair final assemblies
- Testing and/or packaging of sub or final assemblies
- In-line checking or reporting for critical appearance defects in major assemblies, sub-assemblies, or other major components
- Repetitive use of vibrating tools and air guns
- Repetitive motion work
Essential Functions/Responsibilities:
- Assemble housing, optical, or combined luminaire using tools and fixture.
- May work on a build complete cell or on an assembly line.
- Obtain and work from Bills of Material, parts lists, wiring diagrams and other documentation, or instructions.
- Gather material, assemble, and test on computer-controlled test equipment.
- Pack, operate equipment, and rework fixtures as required.
- Follow appropriate Manufacturing Control Plan (MCP) and sign off as required.
- Responsible for participating in applicable plant Safety Programs and promoting a safe work environment.
- Standing, lifting, twisting, and turning in a fast-paced environment
- Exhibit good communication skills and operate as a team
- Perform related duties as assigned
Qualifications/Requirements:
- Must have 6 months' work history through staffing agency at Current Lighting.
- Must be at least 18 years of age
- Must pass background check and drug screen
- Legally authorized to work in the U.S.
- Must be able to work overtime
- Must be able to work weekend shifts and occasional holidays
- Must be able to wear personal protective equipment, for example safety glasses, gloves, hats, and safety shoes
- Must speak English proficiently and have the ability to follow verbal and written instructions in English
- Ability to work in a tobacco-free environment
- With or without reasonable accommodation, must be able to lift/carry 35 lbs.
- With or without reasonable accommodation, must be able to stand for long periods of time up to 7 hours or 80% of a shift (with the exception of a 30-minute lunch break and two 10-minute breaks)
Desired Characteristics:
- Prior manufacturing experience
- Prior lighting fixture assembly experience
- High School Diploma, general education degree (GED), or Equivalent
o Note: Required for permanent employment
Environment:
- Conditions: indoors, good lighting, cement floors with ergonomic mats to stand on, good ventilation, temperature ranges from 65 to 85 degrees, noise, and proximity to moving objects.
- Length of shift: 8 ½ hours, 1st shift (7 AM to 3:30 PM) and 2nd shift (3:30 PM to 12 AM) with a 30-minute lunch and two 10-minute breaks.
Additional Information
Current Lighting is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by law. All employment is decided on the basis of qualifications, merit, and business need.
Responsibilities include:
Assembly of housings, terminal boards, leads, installation of internal components, glass and doors to complete the final product. This involves standing, lifting, pulling, carrying, bending/stooping, reaching, head and neck motion, and handling. The tools involved include the tool balancer, a suction lifter, and rolling cart with a hydraulic height adjuster. The assembly line is set up at a height of 31". All employees must wear steel toed boots and protective eyewear and gloves. Protective earplugs are provided if they would like them but are not mandatory. The lines start by unloading housings from a cart which involves the employee pivoting 90 or 180 degrees (depending on the production line), reaching for the housing, and then placing it to the assembly line. Once on the line, each member of the team works on the housing to complete the fixture. They have electronic, low torque, retractable screw drivers that are suspended overhead and can easily be pulled down to assist with assembly. Supplies required for assembly are positioned in bins in front of employees at chest height. The housing moves down the line on a frictionless surface of rollers. Finally, the fixture is tested and then packed. The packer stands, picks up a box from a stack located at the pack station, fills box with pack material and the fully assembled housing, and then runs it through the automatic sealing/taping device. Once the box is assembled and sealed, it is lifted by hand or with a suction lift and taken to a nearby pallet until it can be taken to the shipping dock via forklift.
Other tasks that assist the production line are walking to get the containers of housings or carts with components on them and pushing the carts to the lines. This is sometimes done by line members and sometimes completed by other employees.
All movements are ergonomically sound with forces minimized through hydraulics. The screwdrivers have arm rests to minimize wrist forces. The greatest stress is standing and fine motor tasks of assembly. The surface they stand on is ergonomic matting.
hat assist the production line are walking to get the containers of
housings or carts with components on them and pushing the carts to the lines. This is
sometimes done by line members and sometimes completed by other employees.
- All movements are ergonomically sound with forces minimized through hydraulics.
The screwdrivers have arm rests to minimize wrist forces. The greatest stress is
standing and fine motor tasks of assembly. The surface they stand on is ergonomic
mattin
g.