Recent Searches

You haven't searched anything yet.

1 Measurement Technician Job in Grand Island, NE

SET JOB ALERT
Details...
Tallgrass MLP Operations, LLC
Grand Island, NE | Full Time
$55k-72k (estimate)
3 Weeks Ago
Measurement Technician
$55k-72k (estimate)
Full Time 3 Weeks Ago
Save

Tallgrass MLP Operations, LLC is Hiring a Measurement Technician Near Grand Island, NE

Tallgrass was named one of the 2023 Top Workplaces USA and highlighted in Colorado's Top Workplaces for the past seven consecutive years. Tallgrass is a leading energy infrastructure company focused on safely, reliably, and sustainably delivering the energy and services that power our nation and enable our quality of life.

At Tallgrass, we value our teams and strive to create an environment where employees feel respected, and their contributions are valued. We aim to support employees' physical, mental, and financial well-being through a comprehensive Total Rewards Program.

  • Industry competitive pay
  • Health insurance package options that include Flexible Spending & Health Savings Accounts 
  • Infertility Coverage
  • Parental Leave
  • 401(k) with up to a 6% match that vests immediately plus an employer discretionary contribution of up to 4%
  • Wellness Programs and Mental Health Resources
  • Employer-paid life insurance, short-term disability, and long-term disability coverage
  • Critical Illness & Accident Insurance
  • Vacation, sick days, paid caregiver leave, volunteer and bereavement paid time off
  • Identity theft protection
  • Annual discretionary bonus
  • Generous Tuition Reimbursement Program
  • Company-paid holidays and floating holidays
  • Company vehicle (if applicable)
  • Employee discounts; vehicles, tires, cellular plans, and more
  • Networking and employee engagement events
  • Personal development to grow your career with us based on your strengths and interests

MEASUREMENT TECHNICIAN PRIMARY PURPOSE:

Responsible for the installation, operation, and maintenance of pipeline measurement (gas, oil, CO2) and control facilities. This includes flow computers, chromatographs, contaminant analyzers, SCADA equipment, regulators, transducers, electronic/pneumatic controllers, relief valves, control valves, pipeline valves, ultrasonic/rotary/turbine/coriolis meters, pipeline heaters, filtration systems, and odorizers. Performs frequent audits of custody transfer and control data. Required to respond to after-hour “call-outs” due to equipment and/or operational problems and must be willing to work overtime on an as-needed basis.

MEASUREMENT TECHNICIAN ESSENTIAL DUTIES & RESPONSIBILITIES:

• Must be a self-starter and highly motivated.

• Install, maintain & operate, measurement equipment

• Detect measurement errors and correct volumes as needed and provide supporting documentation.

• Monitor assigned area measurement system, and ensure all corrections and proper qualities are applied.

• Assess all facets of assigned facilities to ensure accurate measurement while maintaining the company “Lost and Unaccounted For” gas with a high degree of ownership within the established corporate goals.

• Perform audits of custody transfer and control data when necessary.

• Interpret and apply electrical and electronic schematics about EFM (Electronic Flow Measurement) and measurement electronics.

• Responsible for the general upkeep and maintenance of all facilities and equipment as needed.

• Oversee the construction and/or maintenance activities performed by third parties.

• Complete appropriate documentation and paperwork.

• Perform all work in compliance with Company standards, procedures, and regulatory and tariff requirements.

• Ability to troubleshoot pneumatic, electronic, and electrical equipment and controls.

• Ability to perform basic mechanical work associated with natural gas facilities.

• Participate in federal inspections.

• Ability to actively support the company safety program.

• Identify, report, and correct safety and environmental concerns.

• Maintain a high regard for personal safety, for the safety of company assets and employees, contractors, and the general public.

• Work performance strives for operational excellence focusing on safety, compliance, efficiency, environmental awareness, and superb technical skills.

• Must be able to work in extreme weather conditions and with minimal direct supervision.

• Must be available for and provide an emergency response after regular business hours which may require carrying a personal cell phone.

• Strong analytical and troubleshooting skills.

• Must be proficient in computer software applications including Microsoft Office (Word, Excel, Windows XP, and Windows 7), and be able to manipulate large spreadsheets and databases.

• Deal with a wide variety of people with tact, courtesy, and professionalism.

• Speak, both in person and by telephone, using a high level of verbal skills, and listen carefully.

• Maintain regular, dependable attendance and a consistently high level of performance.

• Will work non-traditional hours as needed.

• Other daily, weekly, monthly or special project duties as identified and defined.

• Other duties as assigned.

MEASUREMENT TECHNICIAN JOB REQUIREMENTS:

Minimum requirements:

Education:

• Associates degree in a technical field or related discipline.

• Relevant work experience that has developed equivalent technical/measurement-related skills may be considered instead of a degree.

Experience/Specific Knowledge:

• Basic math skills (addition, subtraction, multiplication, division, fractions, decimals).

• Knowledge of electronic test instruments.

• Knowledge of gas chromatography.

• Familiarity with AGA, API, and GPA measurement standards.

• Good record of safe work practices.

• Familiarity with DOT regulations

• Knowledge and experience with safe handling practices of products (gas and liquids).

• Ability to troubleshoot pneumatic, electronic, and electrical equipment and controls.

• Experience with mechanical, pneumatic, and electronic equipment used in gas measurement and control.

• Intermediate proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint, and Outlook.

Certifications, Licenses & Registrations:

• Must be required to achieve and maintain certifications as required to perform job duties and applicable to the job classification.

• Completion of any site-specific technical training may be applicable.

• Must possess and maintain a valid driver’s license and a driving record satisfactory to the company and its insurers (for travel).

Competencies, Skills & Abilities:

• Must respond to, and address, call-outs, and emergencies during and after regular business hours including after dark hours, which require carrying a communication device.

• Depending on location and workload, travel will be required.

• Overtime may be required and is anticipated.

• Good verbal and written communication skills.

• Customer focus.

• Interface directly with customers and provide a high degree of satisfaction and confidence that accurate measurement is taking place.

• Must be able to perform all essential and marginal functions of the job.

• Must be able to work with a team, take direction from management, adhere to required work schedules, focus attention on details, and follow work rules.

• Ability to successfully perform multiple tasks with strict deadlines.

• Ability to organize and prioritize daily work.

• Job level commensurate with experience and skill sets; position will be filled depending on qualifications, experience, and skillsets of the successful candidate.

Physical Demands:

All of the physical requirements listed below are those that may be necessary for an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Sitting; standing; walking or moving throughout the facility; driving; talking; seeing (specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus); hearing; feeling; bending or stooping; squatting or crouching; reaching; kneeling; pushing; pulling; lifting up to 50 lbs.

• Minimal safety hazards; general office working conditions.

• Must be able to sit for prolonged periods.

• The employee is regularly required to use hands to type, touch, handle, or feel. The employee is required to talk and hear. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 50 pounds.

• Physical requirements include but may not be limited to climbing to and working from elevated platforms, excavated areas, safely negotiating ladders, stairs, uneven surfaces, walkways, etc.

• Will be required to maneuver 100-pound products with the assistance of safety devices such as bottle carts or hand carts.

• May work in low-lit areas Working Conditions:

• Living environs may be negotiable and will be relevant to the work location.

• Required to work outside in all environmental conditions.

• Required to carry a cell phone and be available to respond during working and non- working hours.

• The successful candidate will be required to clear a drug screen and a complete background check, including a credit report for certain positions, after an offer has been extended and before being employed.

Supervisory Responsibility:

• None

PREFERRED EDUCATION, EXPERIENCE, CERTIFICATIONS, COMPETENCIES, SKILLS, & ABILITIES:

Above the minimum requirements; not required but advantageous in this position:

• Experience with electronic flow measurement computers, gas chromatographs, gas quality analyzers, SCADA equipment, electronic and pneumatic controllers, regulators, OPP, and transducers.

• Working knowledge of the overall natural gas industry pipelines, compression, and peripheral equipment.

• Working knowledge of AGA, API, and GPA standards.

• Working knowledge of National Electrical Code philosophies and installation requirements.

• Experience with computer interface software, networking, and data file management.

Other responsibilities:

The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned.

Tallgrass is an equal opportunity employer. Qualified applicants are considered for positions without regard to race, color, religion, sex, national origin, age, citizenship status, marital status, medical condition, physical or mental disability, or any other legally protected status. EOE/M/F/D/V

Tallgrass is an equal opportunity employer. Qualified applicants are considered for positions without regard to race, color, religion, sex, national origin, age, citizenship status, marital

status, medical condition, physical or mental disability, or any other legally protected status. EOE/M/F/D/V

Job Summary

JOB TYPE

Full Time

SALARY

$55k-72k (estimate)

POST DATE

05/18/2024

EXPIRATION DATE

07/21/2024

Show more

Tallgrass MLP Operations, LLC
Full Time
$210k-296k (estimate)
3 Days Ago
Tallgrass MLP Operations, LLC
Full Time
$57k-73k (estimate)
7 Days Ago

The job skills required for Measurement Technician include Troubleshooting, Installation, Schematic, Microsoft Office, Pneumatics, Written Communication, etc. Having related job skills and expertise will give you an advantage when applying to be a Measurement Technician. That makes you unique and can impact how much salary you can get paid. Below are job openings related to skills required by Measurement Technician. Select any job title you are interested in and start to search job requirements.

For the skill of  Troubleshooting
Zoetis
Full Time
$53k-70k (estimate)
Just Posted
For the skill of  Installation
Leonard Management/McDonald's
Full Time
$40k-51k (estimate)
5 Days Ago
For the skill of  Schematic
REV Group
Full Time
$45k-60k (estimate)
2 Weeks Ago
Show more

The following is the career advancement route for Measurement Technician positions, which can be used as a reference in future career path planning. As a Measurement Technician, it can be promoted into senior positions as a Calibration Technician III that are expected to handle more key tasks, people in this role will get a higher salary paid than an ordinary Measurement Technician. You can explore the career advancement for a Measurement Technician below and select your interested title to get hiring information.

If you are interested in becoming a Measurement Technician, you need to understand the job requirements and the detailed related responsibilities. Of course, a good educational background and an applicable major will also help in job hunting. Below are some tips on how to become a Measurement Technician for your reference.

Step 1: Understand the job description and responsibilities of an Accountant.

Quotes from people on Measurement Technician job description and responsibilities

Install, maintain and calibrate gas and liquid meters and associated mechanical or electronic systems.

02/19/2022: Providence, RI

Performs meter calibration and repair, flow measurement, pump performance testing, and other related technical work.

03/09/2022: Las Vegas, NV

Size orifice plates, take gas samples and input configurations into EFM and various transmitters. Set process controls in both the field and processing plants.

02/15/2022: Alexandria, LA

Coordinate measurement testing activities with vendors and third party transportation companies as required.

03/02/2022: Cedar Falls, IA

Perform sampling as required by OP measurement standards or as requested.

04/02/2022: Greensboro, NC

Step 2: Knowing the best tips for becoming an Accountant can help you explore the needs of the position and prepare for the job-related knowledge well ahead of time.

Career tips from people on Measurement Technician jobs

Basic understanding of gas chromatographs and measurement standards are needed for this role.

03/23/2022: Miami, FL

Some employers demands having a good computer skills to include the Microsoft Office suite of products, as well as applicable industry programs when applying for this role.

04/11/2022: Lawton, OK

There are no formal education requirements to become a measurement technician, but some employers prefer candidates who have an associate degree in a technical field or applied science.

03/18/2022: Worcester, MA

Measurement Technician needs at least 3-5 years gas measurement experience with working knowledge of gas or oil production equipment with a responsible attitude for personal safety and the safety of co-workers, contractors and the public.

03/03/2022: Altus, OK

You must have working knowledge of functionality of Gas and Liquid measurement and equipment.

04/06/2022: Newark, NJ

Step 3: View the best colleges and universities for Measurement Technician.

Oral Roberts University
Warner Pacific University
Colgate University
United States Naval Academy
Wesleyan University
University of California--Los Angeles
Show more