1 Instrumentation Technician Job in Bloomington, IN
SORT BY
J
Instrumentation Technician
$47k-70k (estimate)
Full Time | Business Services
1 Week Ago
JLL is Hiring an Instrumentation Technician Near Bloomington, IN
This position is located in Bloomington, IN
What this job involves -
The Instrumentation Technician oversees the daily operation of the campus systems, utilities, and process equipment. Utilizes the site BMS to ensure systems are operated within design parameters in the most energy efficient manner. The Instrumentation Technician manages outside BMS contract service providers, assists in controls troubleshooting and takes appropriate actions to protect equipment and personnel when systems are not functioning properly. This position requires a high level of technical expertise with a variety of building and process systems. The individual in this role must be available for on-call work.
What is your day to day?
Troubleshoot building and process automation from basic to advanced control
Troubleshoot digital communications used in automation and control system
Troubleshoot field and test instruments
Install, troubleshoot, and repair campus systems, utility, and process equipment & instrumentation
Fine tune loops to achieve better environmental control as well as to save energy
Troubleshoot, repair, and verify operation of the SCADA remote monitoring and control system for campus systems, utility, and process equipment
Work on Siemens Building Automation System - Installing physical devices / instruments, connecting them to field panels, building points and graphics, trending points, alarm management, field troubleshooting etc.
Interact with other departments to schedule activities around the production schedules of the cGMP Manufacturing and Process Development departments. Schedule self-performed work assigned at beginning of month and due by end of month.
Assist team members during startup of equipment to identify and correct problems that may arise during troubleshooting
Evaluate control system performance and make recommendations to optimize process efficiency, reliability, and safety
Knowledge and hands on experience with control and simulation techniques and strategies
Perform troubleshooting, PMs or Calibrations, and physical repair work along with team as needed by testing and calibrating electrical, mechanical, electromechanical, and analytical instruments & equipment for conformance to established standards using engineering principles
Examples include but not limited to: WFI, Clean Steam, HVAC, Compressed Gases, Waste Treatment, CIP, Autoclaves, Glassware Washers, vessels, Cold/Warm equipment & rooms, Control Systems, and Aseptic Filling systems
Provide responsive customer support with emphasis on customer satisfaction
Provide complete and accurate documentation
Know how to read and interpret prints, schematic drawings, manuals, and specification documents; mark up and create red line drawings.
Maintain trained and certified status as required in cGMP, GLP, HR, and industry procedures as required
Support internal, Client, and Regulatory Agency audits as required
Work with shipping to send out equipment or standard for offsite vendor service and track status
Contribute to the creation of maintenance and calibration procedures and update existing procedures to match best practices and lessons learned
Identify and order spare or replacement parts for equipment utilizing inventory management system
Recommend facility improvements to meet OSHA safety, ISPE, or FDA guidelines
Any and all other duties assigned
System Monitoring
As required, review of system operations reports to ensure that systems are functioning properly and not wasting energy by running redundant equipment when not required.
Physical Job Requirements -
Overhead work / working at heights required
Must be able to work in a clean room manufacturing environment which includes gowning and respirator requirements
Environmental conditions will vary based on the job being performed. Work may take place in either the calibration lab and/or in the plant depending upon the job requirements. Must be capable of working outdoors in all types of weather conditions.
Skilled and physically able to operate electric hand tools, work on a ladder, carry tools, lift, and carry heavy loads, and operate required equipment
Desired experience and technical skills
Required
10 years working with electrical or instrumentation/controls systems.
Knowledge of the following BMS platforms but not limited to Siemen's, DeltaV, Honeywell, and Allan Bradley.
Proficient in basic computer application software such as MS Office, Outlook, CMMS systems, etc.
Adequate skills to perform required job functions with minimal supervision
Subject to 24-hour availability
Valid driver's license
Preferred
Conflict resolution skills. Excellent written and oral communication skills.
Engineering degree
Trade license, apprenticeship
Ability to program Controls (BAS/BMS) systems.
Conflict resolution skills. Excellent written and oral communication skills.
Able to work in a customer service environment interacting with the client. Able to stay on task and work independently with minimal direction and supervision.
Good interpersonal skills, ability to communicate well in both oral and written reports. Leads by example. Manages competing priorities well.
Ability to analyze and make decisions based on broad range of data.
Interface - ability to effectively deal with customer/consumer complaints
JLL Is an Equal Opportunity Employer JLL is committed to developing and maintaining a diverse workforce. JLL strongly believes in equal opportunity extended to all individuals in all aspects of the employment relationship, including recruitment, hiring, training, promotion, transfer, discipline, layoff, recall and termination without regard to race, color, religion, belief, creed, age, sex, pregnancy or maternity (including childbirth and related conditions), family responsibility (e.g. child care, elder care), nationality, ethnic or national origin or ancestry, citizenship, marital status, civil partner status, sexual orientation, gender identity or expression, transgender status, veteran’s status, genetic information, trade union membership, social position, political view or status as a qualified individual with a disability, protected leave status or any other protected characteristic in accordance with applicable law. The company also endeavors to make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodations would impose an undue hardship on the operation of our business and ensures that employment decisions are based only on valid job requirements.
What this job involves -
The Instrumentation Technician oversees the daily operation of the campus systems, utilities, and process equipment. Utilizes the site BMS to ensure systems are operated within design parameters in the most energy efficient manner. The Instrumentation Technician manages outside BMS contract service providers, assists in controls troubleshooting and takes appropriate actions to protect equipment and personnel when systems are not functioning properly. This position requires a high level of technical expertise with a variety of building and process systems. The individual in this role must be available for on-call work.
What is your day to day?
Troubleshoot building and process automation from basic to advanced control
Troubleshoot digital communications used in automation and control system
Troubleshoot field and test instruments
Install, troubleshoot, and repair campus systems, utility, and process equipment & instrumentation
Fine tune loops to achieve better environmental control as well as to save energy
Troubleshoot, repair, and verify operation of the SCADA remote monitoring and control system for campus systems, utility, and process equipment
Work on Siemens Building Automation System - Installing physical devices / instruments, connecting them to field panels, building points and graphics, trending points, alarm management, field troubleshooting etc.
Interact with other departments to schedule activities around the production schedules of the cGMP Manufacturing and Process Development departments. Schedule self-performed work assigned at beginning of month and due by end of month.
Assist team members during startup of equipment to identify and correct problems that may arise during troubleshooting
Evaluate control system performance and make recommendations to optimize process efficiency, reliability, and safety
Knowledge and hands on experience with control and simulation techniques and strategies
Perform troubleshooting, PMs or Calibrations, and physical repair work along with team as needed by testing and calibrating electrical, mechanical, electromechanical, and analytical instruments & equipment for conformance to established standards using engineering principles
Examples include but not limited to: WFI, Clean Steam, HVAC, Compressed Gases, Waste Treatment, CIP, Autoclaves, Glassware Washers, vessels, Cold/Warm equipment & rooms, Control Systems, and Aseptic Filling systems
Provide responsive customer support with emphasis on customer satisfaction
Provide complete and accurate documentation
Know how to read and interpret prints, schematic drawings, manuals, and specification documents; mark up and create red line drawings.
Maintain trained and certified status as required in cGMP, GLP, HR, and industry procedures as required
Support internal, Client, and Regulatory Agency audits as required
Work with shipping to send out equipment or standard for offsite vendor service and track status
Contribute to the creation of maintenance and calibration procedures and update existing procedures to match best practices and lessons learned
Identify and order spare or replacement parts for equipment utilizing inventory management system
Recommend facility improvements to meet OSHA safety, ISPE, or FDA guidelines
Any and all other duties assigned
System Monitoring
As required, review of system operations reports to ensure that systems are functioning properly and not wasting energy by running redundant equipment when not required.
Physical Job Requirements -
Overhead work / working at heights required
Must be able to work in a clean room manufacturing environment which includes gowning and respirator requirements
Environmental conditions will vary based on the job being performed. Work may take place in either the calibration lab and/or in the plant depending upon the job requirements. Must be capable of working outdoors in all types of weather conditions.
Skilled and physically able to operate electric hand tools, work on a ladder, carry tools, lift, and carry heavy loads, and operate required equipment
Desired experience and technical skills
Required
10 years working with electrical or instrumentation/controls systems.
Knowledge of the following BMS platforms but not limited to Siemen's, DeltaV, Honeywell, and Allan Bradley.
Proficient in basic computer application software such as MS Office, Outlook, CMMS systems, etc.
Adequate skills to perform required job functions with minimal supervision
Subject to 24-hour availability
Valid driver's license
Preferred
Conflict resolution skills. Excellent written and oral communication skills.
Engineering degree
Trade license, apprenticeship
Ability to program Controls (BAS/BMS) systems.
Conflict resolution skills. Excellent written and oral communication skills.
Able to work in a customer service environment interacting with the client. Able to stay on task and work independently with minimal direction and supervision.
Good interpersonal skills, ability to communicate well in both oral and written reports. Leads by example. Manages competing priorities well.
Ability to analyze and make decisions based on broad range of data.
Interface - ability to effectively deal with customer/consumer complaints
JLL Is an Equal Opportunity Employer JLL is committed to developing and maintaining a diverse workforce. JLL strongly believes in equal opportunity extended to all individuals in all aspects of the employment relationship, including recruitment, hiring, training, promotion, transfer, discipline, layoff, recall and termination without regard to race, color, religion, belief, creed, age, sex, pregnancy or maternity (including childbirth and related conditions), family responsibility (e.g. child care, elder care), nationality, ethnic or national origin or ancestry, citizenship, marital status, civil partner status, sexual orientation, gender identity or expression, transgender status, veteran’s status, genetic information, trade union membership, social position, political view or status as a qualified individual with a disability, protected leave status or any other protected characteristic in accordance with applicable law. The company also endeavors to make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodations would impose an undue hardship on the operation of our business and ensures that employment decisions are based only on valid job requirements.
Job Summary
JOB TYPE
Full Time
INDUSTRY
Business Services
SALARY
$47k-70k (estimate)
POST DATE
04/27/2024
EXPIRATION DATE
07/02/2024
WEBSITE
us.jll.com
HEADQUARTERS
SAINT LOUIS, MO
SIZE
>50,000
FOUNDED
1997
CEO
JAMIE L LIPPERT
REVENUE
$10B - $50B
INDUSTRY
Business Services
Related Companies
Show more
The job skills required for Instrumentation Technician include Calibration, Troubleshooting, Schematic, HVAC, Customer Service, Oral Communication, etc. Having related job skills and expertise will give you an advantage when applying to be an Instrumentation Technician. That makes you unique and can impact how much salary you can get paid. Below are job openings related to skills required by Instrumentation Technician. Select any job title you are interested in and start to search job requirements.
Show more
The following is the career advancement route for Instrumentation Technician positions, which can be used as a reference in future career path planning. As an Instrumentation Technician, it can be promoted into senior positions as an Instrument Technician III that are expected to handle more key tasks, people in this role will get a higher salary paid than an ordinary Instrumentation Technician. You can explore the career advancement for an Instrumentation Technician below and select your interested title to get hiring information.
Similar Jobs
Popular Articles
Top 10 Things to Avoid Putting on a Job Application
Read Article
How to Describe Your Education in a Resume
Read Article
How to Write a Memorable Cover Letter in 5 Ways
Read Article
4 Personal Finance Tips to Make During Job Transition
Read Article
4 Best Camera Setups for Interview
Read Article
Keeping a Job Search Journal: 9 Types of Journaling You Can Do
Read Article
