This position starts at an hourly rate of $38.39 per hour

GENERAL
RESPONSIBILITIES:
Operate in safe, correct manner all assigned equipment such as lift truck, front-end loader, man lift, crane, etc. (training required)
Unload parts for the storeroom using forklift daily
Inspect, decontaminate, and clean air-purifying respirators monthly.
-Posichek
masks with Total Safety (Annual Inspection)
Perform and document 17 monthly safety equipment inspections. Update each document as the inspections change or discrepancies are uncovered. Inspections to include the following:
Shelter In Place/Evac Kits
Stairs/Walking Surfaces
Scott Air Paks (SCBAS)
Safety Equipment Lockers
Post Indicator Valves/Fire Sprinkler
Safety Shower/Eyewash
Ladders
Inergen & Halon Systems (schedule bi-annual service with ADT)
Harness, SRL, Lanyard (schedule yearly competent with Total Safety)
Full Face Respirator in Plant 4
First Aid Cabinets
Fire Protection Valves
Fire Extinguishers (schedule annual service with blackbird fire protection)
Emergency Lights
Emergency Escape Packs (10 min w/ hoods)
Driver Emergency Radio
SPCC Oil Inspection
Environmental Audit for hazardous waste areas (weekly)
Waste Generator to create label with
assistance of Environmentalist
Maintain and document inspection records. Write work orders or bring to the attention of the appropriate department head deficiencies found during inspection.
Write and implement new safety equipment inspection with the guidance of safety department head.
Upload Safety Inspections to share drive after each month is completed.
Coordinate yearly fire extinguishers inspection (blackbird fire protection)
Coordinate employee uniform service issues with the uniform company
-Order
new uniforms for new hires, sizes exchanges, coordinate extra servicing for
T/As.
-Employees
to follow process tag process for damaged items
Fill in for the head storeroom operator when operator is off
Monitor plant trash/waste (red trash bins, metal trash bins, roll off bins) (Weekly)
-Call
Waste Resources for roll off bin pick-ups
-Call
Kramer Metals for roll off bin pick-ups
Perform Quartly Security Audit for Plant
Perform Quartly Area 9 & 11 PGI
Run errands to make unique supply purchases.
File for safety department. (Should be monitored quarterly)
- Prior year box should be left in safety
office
- Every year prior should be placed in
Plant 1 container
Monitor breathing air bottles for SCBAs (take to total safety for air fill if needed)
Monitor SCBA apparatus inspection dates (flow test required every 2 years)
Monitor SCBA bottles hydro dates (Requires new hydro every 5 years)
Monitor Propane tanks & get them refilled as needed
Monitor, clean & organize hazardous waste storage area
Monitor, report & work with Environmentalist for has waste pick ups
Ensure equipment approved for use e.g., forklifts, safety showers, ladders, etc.
Assist Storeroom Operator as needed
Work on special projects as needed
Forklift Support as needed (Daily)
HS&E
RESPONSIBILITIES
Be
knowledgeable of and comply with all applicable site, corporate and
regulatory safety and environmental requirements.
Properly
inspect, use and maintain necessary PPE in accordance with site PPE
matrix.
Report
all safety or environmental incidents immediately.
Maintain first aid supply inventory, notify HSE specialist (Gina) for required items to replace.
Maintain records. As new inspections are developed, set up new files. Write work orders or bring to the attention of the appropriate department head deficiencies found during the inspection. Audit other department safety inspection records to make certain records complete. Deficiencies in record keeping are reported to the appropriate department head.
Write and implement new safety equipment inspection with the guidance of the safety or maintenance department head. All inspections must be written in professional and consistent manner with particular emphasis on detail and simplicity. A thorough knowledge of the legal requirement, goal and method of inspection is required to write the procedure
Interface with at least five departments: safety, maintenance, process safety, production
SPECIFIC
JOB REQUIREMENTS
Must be organized, conscientious, motivated, self-directed and practical.
Must work well with others
Good written and verbal communication skills
Independent thinker
Distill essence of procedures and have a good attendance record
Must be hardworking and be able to perform the above described work in an efficient and effective manner
Some of the inspections are physically demanding such as hiking the fence line, lifting Scott Air Packs, opening and closing of post indicator valves and climbing ladders to get to all the safety showers and eye washes.
Able to wear full face respirator
Education
and/or Experience:
High school diploma or general
education degree (GED)
Two plus years of experience
in an Industrial environment,, manufacturing preferred.