2 Facility Maintenance Technician Jobs in Palmer, AK
Cruz Companies is Hiring a Facility Maintenance Technician Near Palmer, AK
| Job Title: Facility Maintenance Technician | SOC code: 49-9071 | FLSA Classification: Non-exempt |
| Location: Palmer/North Slope | Reports to: Camp and Facilities Manager | |
| Status: Full Time, Temporary | EEO-1: Craft Workers | |
| Normal Work Hours and Days: On site for all camp set-ups and demos. Rotational schedule, working 12 hour days for 7 days a week. Mandatory overtime based on seasonal workload and work settings. Benefits: Once eligible Health Insurance (medical, dental, vision) & 401(k) | ||
Approved by: John Stogsdill Revised: 10/31/2023 |
- Ability in rough framing and interior finish carpentry.
- Repair, install and replace plumbing such as coper sweating, PEX, PVC, and ABS.
- Able to install carpet, tile, room furnishings and cabinets per prints.
- Rough-in, trim-out, and installation of electrical wiring. This includes landing of panels troubleshooting/ tracing circuits and the understanding of HVAC components.
- Perform a variety of skilled and semi-skilled facilities preventative maintenance, component replacement, and repair tasks.
- Have a clear understanding of Blueprints and ability to read them.
- Work on assigned projects and make appropriate decisions based on work experience and individual skill. Notify supervisors of repair problems beyond personal scope of authority
- Inspect and maintain assigned equipment and small tools for proper operating condition, and completes minor repairs as needed.
- Operate vehicles and equipment in accordance with all safety and regulations and procedures; identifies and reports mechanical problems requiring additional repair.
- Notifies supervisor of all damage in accordance to Cruz Construction procedures.
- Log daily hours worked on each task and equipment.
- Obtain estimates for supplies and repair parts, and order parts as needed.
- Perform outside jobs such as siding repairs, roofing, and window install/ replacement.
- All employees are required to provide their own tools (SAE and metric). Such tools include, but are not limited to the following:
-
-
-
- Nut drivers
- Channel locks (various sizes)
- Socket set (5/16” to 1”)
- Alan wrench set (kit up to 3/8”)
- Alan socket set (1/4” up to 5/8”)
- Crescent wrench set (6”, 8”, 12”)
- Open end wrench set (1/4” to 1”)
- 600V rated meter (1000A or greater)
- Ten in one screw driver
- Aviation snips (right, left, straight)
- Dikes
- Needle-nose plyers
- Lineman’s
- Wire strippers
- Utility knife
- Cordless screw gun and impact
- Basic carpenter tools and bags
-
-
-
- Performs other related duties, as assigned.
- Four years of experience in skilled building trades.6 months of prior experience as a laborer
- Basic skill in carpentry, mechanical, plumbing, and electrical work.
- High School Diploma or GED.
- Specific trade certifications/licenses.
- Knowledge of basic carpentry, mechanical and basic electrical and plumbing work.
- Knowledge of operations and safety practices and procedures.
- Ability to work as part of a team, communicate effectively with fellow workers and clients.
- Ability to work independently and with minimal supervision.
- Ability to perform physical labor in harsh winter conditions.
- Ability to read, write, and comprehend simple instructions, short correspondence, and memos.
- Ability to effectively present information in one-on-one and in small group situations.
- Ability to add, subtract, multiply, and divide in all unites of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, percent, and to interpret miscellaneous drawings and schematics.
- Ability to lift and carry up to 50lbs and manipulate up to 100lbs.
- Ability to work comfortably at heights and in small spaces.
- Ability to safely operate vehicles, equipment, and tools.
- Skilled in problem solving everyday work-related challenges.
| Not Present | = NP | |||
| 1-10% of the work day | = Rare | 34-66% of the work day | = Frequent | |
| 11-33% of the work day | = Occasional | 67-100% of the work day | = Constant | |
| Sitting | Frequent | Reaching Overhead | Frequent | |
| Standing | Frequent | Reaching Straight Ahead | Frequent | |
| Walking | Frequent | Reaching Downward | Frequent | |
| Bending/Stooping | Frequent | Handling | Frequent | |
| Crouching | Frequent | Fingering | Constant | |
| Kneeling | Frequent | Feeling | Occasionally | |
| Crawling | Frequent | Talking | Occasionally | |
| Climbing | Frequent | Hearing | Occasionally | |
| Balancing | Occasionally | Twisting | Frequent | |
| Operate Foot Controls | Occasionally | Twist of Wrist | Frequent | |
| (Pounds) | Constant | Frequent | Occasional | Rare |
| Lifting | 50 lbs. | 100 lbs. | ||
| Carrying | 10 lbs. | 50 lbs. | 100 lbs. | |
| Pushing/Pulling | 50 lbs. | 100 lbs. | ||
| ENVIRONMENTAL CONDITIONS | CHECK (If Present) COMMENTS | ||
| 1. | Exposure to Inclement Weather | X | Regularly exposed to inclement weather |
| 2. | Extreme Cold | X | |
| 3. | Extreme Heat | X | |
| 4. | Wet and/or Humid | X | Will experience Rain/Snow/Ice on location |
| 5. | Noise | X | Moderate to high noise level. |
| 6. | Vibration | X | Occasional normal equipment vibration. |
| 7. | Atmospheric Conditions (dust/fumes/etc.) | X | Possible diesel fumes. |
| INHERENT HAZARDS | |||
| 8. | Moving Mechanical Parts | X | |
| 9. | Electric Shock | ||
| 10. | High, Exposed Places | X | Occasionally exposed to situations which require fall protection. |
| 11. | Radiant Energy | ||
| 12. | Explosives | ||
| 13. | Toxic or Caustic Chemicals | X | Occasionally exposed |
| 14. | Other Risks | X | Aware of the potential hazards of working around equipment. |
This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.
Job Summary
Full Time
Building Construction
$54k-70k (estimate)
11/03/2023
05/14/2024
cruzcompanies.com
DORCHESTER, MA
100 - 200
1948
Private
$50M - $200M
Building Construction
Related Companies
The job skills required for Facility Maintenance Technician include Plumbing, HVAC, Preventative Maintenance, Carpentry, Troubleshooting, Repairing, etc. Having related job skills and expertise will give you an advantage when applying to be a Facility Maintenance Technician. That makes you unique and can impact how much salary you can get paid. Below are job openings related to skills required by Facility Maintenance Technician. Select any job title you are interested in and start to search job requirements.
The following is the career advancement route for Facility Maintenance Technician positions, which can be used as a reference in future career path planning. As a Facility Maintenance Technician, it can be promoted into senior positions as a Facility Maintenance Technician III that are expected to handle more key tasks, people in this role will get a higher salary paid than an ordinary Facility Maintenance Technician. You can explore the career advancement for a Facility Maintenance Technician below and select your interested title to get hiring information.
If you are interested in becoming a Facility Maintenance Technician, you need to understand the job requirements and the detailed related responsibilities. Of course, a good educational background and an applicable major will also help in job hunting. Below are some tips on how to become a Facility Maintenance Technician for your reference.
Step 1: Understand the job description and responsibilities of an Accountant.
Quotes from people on Facility Maintenance Technician job description and responsibilities
Assists with maintaining daily operations of the physical facility.
01/31/2022: Florence, SC
Facility Maintenance technician maintains and fix the systems that are essential to functionality of the building.
01/21/2022: Bergenfield, NJ
Operates a variety of maintenance and cleaning tools and equipment; and performs related work as required.
03/15/2022: New Orleans, LA
They are responsible for troubleshooting maintenance problems and for preventive maintenance work.
02/18/2022: Benton Harbor, MI
Facility maintenance duties are simple electrical projects, spot painting and/or cleaning, light construction and/or exterior cleanup.
02/11/2022: Mcallen, TX
Step 2: Knowing the best tips for becoming an Accountant can help you explore the needs of the position and prepare for the job-related knowledge well ahead of time.
Career tips from people on Facility Maintenance Technician jobs
A facility maintenance technician may have more than just the traditional facility technician's share of responsibilities.
03/08/2022: Juneau, AK
Facility maintenance technicians also need to have the skills to perform maintenance and repairs on the property.
01/10/2022: Utica, NY
Facility Technicians may be assigned to do the construction of equipment or materials related to their field of study.
01/22/2022: Nashua, NH
Other than qualifications and experience, maintenance technicians need a variety of skills and abilities to do their job correctly.
12/20/2021: Grand Rapids, MI
This may seem obvious, but facility maintenance technicians are required to be versatile.
03/07/2022: Fort Smith, AR
Step 3: View the best colleges and universities for Facility Maintenance Technician.
Similar Jobs
Popular Articles
