4 Controls Technician Jobs in Shelby, MI
BJ CAAS Advisors is Hiring a Controls Technician Near Shelby, MI
Location: Shelby Township, MI.
Pay: $30.50 hr, plus / 2nd shift premium
Shift: 2nd shift; 4pm-2:30am
Objective:
- Responsible for developing and maintaining automated and electrical systems. Developing, trouble shoot and correcting problems and supervising all aspects of the plant electrical control systems, equipment, and machinery.
- Responsible for the installation and technical support of PLC-based hardware and softwareThe goal is to ensure that the plant is running smoothly and efficiently while also meeting quality and safety standards.
- Trouble shoot and maintain processes that help manufacturers increase productivity.
- Writes and improves control programs to support operations achieving required cycle times, down time in a safe operations mode.
- Works with internal and external resources to understand all requirements to ensure all project needs are met.
- Develops suggestions for improvements, assembles cost and timing information for projects.
- Implements changes and improvement following the change management system.
- The scope of equipment includes Robots, Transfer systems, stamping presses, assembly equipment, welding cells and other machinery and support structure.
meant to be all inclusive. Other duties may be given by the supervisor in addition to, or instead of, those listed here.)
- 1. Analyze and improve performance of existing automated systems
- 2. Install/maintain and inspect control systems throughout the facility
- 3. Troubleshoot non-functioning components including servos, sensors, and control components
- 4. Ensure the calibration of all machines and maintenance after calibration
- 5. Run diagnostic checks and monitor automatic systems
- 6. Responsible to plan and execute new installations, upgrades and continuous improvements with internal and external resources to support our business goals and objectives.
- 7. Reads, modifies, and troubleshoots PLC programs (Allen-Bradley and Siemens preferred) using laptop computer.
- 8. Work with Manufacturing and/or Quality to solve customer Quality issues
- 9. Analyze plant processes and help make improvements based on extensive knowledge of electronics, engineering, and mechanics.
- 10. Develop proactively improvement suggestions to improve plant performance, equipment reliability and uptime
- 11. Creates programs to minimize and limit down time
- 12. Ensures that error proofing devices are programmed to be checked real time and processes are stopped when malfunctions are detected
- 13. Improves equipment uptime and process reliability.
- 14. Ensured that all sensors and process relevant parameters are checked real time to ensure process compliance and processes are stopped when malfunctions are detected.
- 15. Writes programs in a manner that sufficient information is available to the operators so trouble shooting can be done by operators.
- 16. Writes programs in a manner that the process capabilities are maximize and equipment wear and tear is kept to aminimum possible.
- 17. Supporting implementation of Factory 4.0.
- 18. Flexibility to adjust breaks and lunch times in order support production floor.
- 19. Create, verify, and maintain electrical control schematics and program documentation.
- 20. Create and maintain backup programs for all programs and software in both locations to prevent loss.
- 21. Responsible to trouble shoot equipment and facility problems as they arise.
- 22. Support in defining of Statement of Requirements, specifications and standards in respect to controls and programming portion for new and modified equipment.
- 23. Assists in creation of and performs preventative and predictive maintenance activities as assigned.
- 24. Repair of equipment as needed.
- 25. Perform Preventive Maintenance tasks and is involved in TPM.
- 26. Completed required Work orders to improve and repair equipment.
- 27. Develop a Maintenance program for control systems, programs and perform maintenance.
- 28. Performs and maintains backups.
- 29. Provides leadership and direction to maintenance personal or operations teams with trouble shooting activities.
- 30. Continually improve the PM program for control systems.
- 31. Ensure that company policies and procedures are adhered to including IATF 16949, Mafact, ISO14001 (EMS), and Employee Handbook.
- 32. Demonstrated ability to carry out projects from beginning to end in coordination with internal and external resources
- 33. Able to work in teams as well as independently on work assignments.
- 34. Follows MIOSHA, Magna and MPTSH safety regulations and policies, including wearing required P.P.E. (Personal Protective Equipment). Reports unsafe conditions to Supervisor/Leader.
Education and/or Experience:
- High School Diploma or GED required. Must have a minimum of 5 years’ experience in the automotive manufacturing environment.
- Must have strong knowledge of PLC’s (Allen Bradley and Siemens) for troubleshooting.
- Knowledge of robotics (ABB and Fanuc).
- Must be able to interpret and design electrical schematics.
- Knowledge of AC and DC motors and variable speed controllers.
- Knowledge of pneumatic components and pick and place devices.
- Knowledge of pneumatic components and pick and place devices.
- Knowledge of electrical 110/120/220/480.
- Must be continuous improvement minded and must understand the “7 wastes” to write effective programs.
- Must have ability to multitask.
- Must be adaptable, striving to find creative solutions to problems as they arise.
Additional Skills:
- Language Skills: Ability to read and comprehend instructions in English and correspondence such as safety rules andoperating instructions. Ability to document forms as required by position.
- Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, commonfractions and decimals. Ability to compute rate, ratio and percent.
- To perform this job successfully, an individual should have knowledge of AS400.
- Proficiency of Microsoft Office suite including Word, Excel, and PowerPoint.
- Must be comfortable with running and trouble-shooting machinery or has shown aptitude working on electrical, hydraulic and pneumatic systems.
- Ability to apply common sense understanding to carry out instructions furnished in written, oral, diagram, or schedule form.
- Ability to deal with problems involving several concrete variables in standardized situations.
- Is able to conduct individually or in team settings structured problem solving.
- Understands and can apply 5 Why mythology, Skillful in analysis of problems, research to identify root causes and find solutions, creativity to find robust and effective solutions to problems.
- Able to make decisions based on available information.
- Has sufficient technical knowledge to support effective problem solving.
- Active listening, Assertive communication, Has sufficient level of emotional intelligence.
- (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
- Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.)
- While performing the duties of this job, the employee is frequently required to stand and walk.
- The employee is frequently required to reach with hands and arms and talk and listen.
- The employee must be in general good health to meet fast paced environment, and sometimes high stress situations.
- Must be able to function in very fast pace moving environment.
- The employee is occasionally required to; climb or balance; stoop, kneel, crouch, or crawl and lift and/or move up to 50 pounds.
- Specific vision abilities required by this job include close vision, distance vision and ability to adjust focus.
- (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
- Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.)
- While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and risk of electrical shock.
- The employee is occasionally exposed to high, precarious places and vibration.
- The noise level in the work environment is usually moderate to loud.
We have the unique ability to find the ideal candidates quickly and efficiently, and with a competitive advantage for our clients.
Job Summary
Full Time
$50k-60k (estimate)
05/22/2024
07/20/2024
bjcaas.com
Bloomfield Hills, MI
Related Companies
The job skills required for Controls Technician include Calibration, Problem Solving, Microsoft Office, Programming, Continuous Improvement, Installation, etc. Having related job skills and expertise will give you an advantage when applying to be a Controls Technician. That makes you unique and can impact how much salary you can get paid. Below are job openings related to skills required by Controls Technician. Select any job title you are interested in and start to search job requirements.
The following is the career advancement route for Controls Technician positions, which can be used as a reference in future career path planning. As a Controls Technician, it can be promoted into senior positions as a Food Safety Manager that are expected to handle more key tasks, people in this role will get a higher salary paid than an ordinary Controls Technician. You can explore the career advancement for a Controls Technician below and select your interested title to get hiring information.
If you are interested in becoming a Controls Technician, you need to understand the job requirements and the detailed related responsibilities. Of course, a good educational background and an applicable major will also help in job hunting. Below are some tips on how to become a Controls Technician for your reference.
Step 1: Understand the job description and responsibilities of an Accountant.
Quotes from people on Controls Technician job description and responsibilities
Education and technical skills are the primary qualifications for getting a job as an electrical controls technician.
03/26/2022: Norwich, CT
Controls Technician staff supports and give preventative maintenance and monitoring.
03/17/2022: Lansing, MI
Control technicians possess a combination of hard and soft skills to help them successfully complete a job
01/13/2022: Huntington, NY
Trains and provides technical assistance to technicians for best practice, troubleshooting and customer service skills.
01/03/2022: Boulder, CO
Controls Tech Supports all customers through thorough understanding of equipment, systems and business risk mitigation at mission critical facilities.
03/02/2022: Petaluma, CA
Step 2: Knowing the best tips for becoming an Accountant can help you explore the needs of the position and prepare for the job-related knowledge well ahead of time.
Career tips from people on Controls Technician jobs
Controls Technician refrain from leaving behind paper manuals or equipment packaging unless desired by customers.
03/16/2022: Detroit, MI
Experience of heating, ventilation and air conditioning controls.
12/29/2021: Philadelphia, PA
PLC and Controls troubleshooting and maintenance experience.
02/21/2022: Nassau, NY
Working knowledge of building controls and equipment operations.
03/02/2022: Cedar Rapids, IA
Some key duties listed on the Controls Technician Resume are – diagnosing and repairing complex control systems, providing assistance to sketch engineering drawings and modifications, ensuring safety at the workplace, providing guidance on electronic oper
03/04/2022: Des Moines, IA
Step 3: View the best colleges and universities for Controls Technician.
Similar Jobs
Popular Articles
