REPORTS TO: Automated Panel Line Manager SUPERVISES: Fabrication Supervisors DUTIES / RESPONSIBILITIES: The primary function of the Automated Panel Line Foreman, is to work with the Department Manager to give guidance to the Fabrication supervisors and employees. Responsible to the safe operation and maintenance of the automated equipment on the panel line, including: the plasma cutting, plate forming, profile cutting, One Sided Welder, Stiffener fitting and welding, robotic welding process, micro panel line, and sub assembly areas. Review and develop new work procedures to drive continuous improve. Ensure correct construction and inspection procedures are adhered to and managed timely. Ensure all work is performed to the acceptable quality and accuracy standards Provide constant feedback to Manager/Supervisors regarding: Quality, Cost, Delivery, Safety, Morale Ensure supervisors maintain daily, and weekly machine safety checks, and that they are completed and documented to the required specifications Ensure equipment is maintained in proper working order and liaise with Site Services and Equipment Vendor to schedule maintenance. Facilitate resolution of routine operating issues with vendor agents. Work with supervisors to ensure all status is captured and time is charged correctly. Work with Project Managers and Production Control Leads to ensure the active plan is accurate and achievable Ensure a safe and clean environment for all employees In conjunction with production management at all levels, ensures safe working practices and good housekeeping are maintained in all areas and ensures Austal’s policies and procedures are followed. Provide motivation, maintain morale and minimize confrontation Review performance appraisals in conjunction with Supervisors Ensure all earned value and rework is accounted for accurately Ensures all time keeping responsibilities are processed and time is allocated daily Ensure all company policies and procedure are understood and followed All other tasks as assigned by department manager. Responsible for the implementation of all production schedules, monitoring and maintenance of schedules in conjunction with Supervisors Monitor CPI and SPI QUALIFICATIONS / KNOWLEDGE / EXPERIENCE: 6 years steel shipbuilding construction experience 3 years minimum experience using automated panel line process and equipment 3 years minimum experience with CNC machine Experience with US Navy contracts and oversight Strong understanding or experience with new work procedure development Excellent people management skills Strong knowledge of Lean Methods and experience implementing these methods Strong analysis and problem solving capabilities Ability to operate a computer and software – Microsoft Office, construction/project management software Exceptional skills in the areas of teamwork, leadership, communication, negotiation, organization, and time management Strong working knowledge of Maritime Regulatory Authorities (i.e ABS, DNV, GL, NAVSEA, USCG etc.) ADDITIONAL GUIDELINES: The ability to obtain and maintain a DoD clearance is required. Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA: 18 years of age or older at time of application Able to provide proof of US Person Status No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date No felony convictions of Drug crimes within three years from disposition date Willing to submit to a drug screen Willing to submit to a background check The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include the following: 1. Must have the ability to bend, squat, stoop, crawl, and kneel. 2. Perform prolonged standing. 3. Ability to turn head from side to side and about the vertical axis. 4. Ability to turn body at the waist from side to side and about the vertical axis. 5. Lift/push/pull 50lbs to 75lbs on an occasional basis. 6. Lift/push/pull up to 20lbs on a frequent basis. 7. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). 8. Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts. 9. Able to work at a variety of levels (ex. waist, eye, overhead). 10. Demonstrate the ability to safely and appropriately use required tools and equipment. 11. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. 12. Possess sufficient handgrip and coordination to carry and operate tools and equipment. 13. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. 14. Ability to withstand cold and hot temperatures. 15. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time. 16. Able to respond to verbal and audible sounds/commands. 17. Able to utilize adequate visual skills. 18. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 19. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. TOOLS: Sanders, grinders, cutting torch, mechanized cutting machines, arc gouging, applicable components etc. DIRECTION EXERCISED: Will serve as a mentor to less skilled employees LIAISES WITH: Supervisor, step-up supervisor, foreman and other tradesmen WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, 90 dB. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. Equal Employment Commitment Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932. Austal shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability. Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion. Austal USA is a ship manufacturer headquartered in Mobile, Ala., with service centers in San Diego and Singapore and a technology center in Charlottesville, Va. With the most modern steel panel line in the shipbuilding industry, Austal USA’s facility is capable of supporting the manufacture of both aluminum and steel ships. Austal USA leverages a moving module production line and strict adherence to lean manufacturing principles to consistently deliver on-schedule and on-budget. Austal USA is currently under contract for several programs, including the U.S. Coast Guard’s Heritage-class Offshore Patrol Cutter (OPC), the TAGOS-25 ocean surveillance ships, the Spearhead-class Expeditionary Fast Transport (EPF), the Navajo-class Towing, Salvage and Rescue ships (T-ATS), the Expeditionary Medical Ship (EMS), the Auxiliary Floating Dry Dock Medium (AFDM), and the Independence-variant Littoral Combat Ship (LCS), and is supporting Navy unmanned vessel programs leveraging its advanced machinery control system. Austal USA’s service business provides global support to U.S. Navy, Military Sealift Command and other customers. Austal USA’s San Diego Service Center includes a waterfront facility that will have the capability to drydock small combatants and similar sized ships. Earning 23 safety excellence awards, Austal USA continues to be one of the safest shipyards in America.