You haven't searched anything yet.
Job Title (Internal): Fabricator/Machinist/ Deburr- 1st and 2nd Shift
Job Title (Market/External): Fabricator/Machinist/ Deburr- 1st and 2nd Shift
Division: Arrowhead
Department: Fabrication
Reports to: Fabrication Supervisor
Date Updated: 12/8/2021
Job Summary
The Machinist position at AHC is knowledgeable in a variety of tasks associated with Drill press large and small, milling equipment, lathe, saws, deburring, and performing layout duties, tapping holes, and performing metal finishing
Essential Duties and Responsibilities
Other Duties and Responsibilities
General supervision: routine duties are performed with minimal supervision. standard practices or procedures allow me to proceed alone at routine work. occasional check of work while in progress. work is reviewed upon completion.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and Experience
High school diploma or general education degree (GED). or one to three months related experience and/or training. or equivalent combination of education and experience.
Language Skills
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
Mathematical Skills
Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
Reasoning Ability
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
Computer Skills
Intermediate personal computer skills, including electronic mail, routine database activity, word processing, spreadsheet, graphics, etc.
Other Knowledge, Skills, and Abilities
Prioritize tasks.
Physical Demands
Activity | Amount of Time | ||||
None | % of time | ||||
Stand | 66% | ||||
Walk | 33-66% | ||||
Sit | NA | 0 | |||
Talk | 0-33% | ||||
Hearing/Listening | 0-33% | ||||
Use hands and finger to feel | 0-33% | ||||
Reach with arms | 0-33% | ||||
Stoop, kneel, crouch, or crawl | 0-33% | ||||
Weight Lifted | Amount of Time | ||||
None | % of time | ||||
Up to 10 pounds | 33-66% | ||||
Up to 25 pounds | 33-66% | ||||
Up to 50 pounds | 33-66% | ||||
Up to 100 pounds | NA | 0 | |||
More than 100 pounds | NA | 0 | |||
Moderate physical activity performing somewhat strenuous daily activities of a primarily production/technical nature.
Working Conditions
Well-lighted, heated and/or air-conditioned indoor office/production setting with adequate ventilation.
How much exposure to the following environmental conditions does this job require?
None | % of time | |
Wet or humid conditions (non-weather) | X |
|
Work near moving mechanical parts | 66% | |
Work in high, precarious places | X |
|
Fumes or airborne particles | 0-33% | |
Toxic or caustic chemicals | X |
|
Outdoor weather conditions | X |
|
Extreme cold (non-weather) | X |
|
Extreme heat (non-weather) | X |
|
Risk of electrical shock | X |
|
Work with explosives | X |
|
Risk of radiation | X |
|
Vibration | 0-33% | |
| ||
Moderate noise (examples: business office with computers and printers, light traffic)
Regal Rexnord Automation Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Other
Durable Manufacturing
$46k-58k (estimate)
05/23/2023
05/08/2024
arrowheadsystems.com
OSHKOSH, WI
100 - 200
1998
THOMAS YOUNG
$10M - $50M
Durable Manufacturing
Arrowhead Systems, Inc. is a world leader in providing conveyor, packaging machinery and line productivity solutions to customers in industry sectors - including food, beverage, household, personal care, container manufacturing, and more. The companies of Arrowhead Systems have a rich history of innovation and dedication that has been built on over 70 years of service in the industry. Arrowhead Systems was created by joining like-minded companies - Arrowhead Conveyor, Busse/SJI, Priority One, and A&B Engineering Services. We are proud to offer a complete suite of exceptional automation solutio...ns, while never compromising on our extremely high-quality standards. At the end of the day, we worry about all of the details so you dont have to. Products in the Arrowhead Systems family include Arrowhead Conveyors, NeXtconveyor sanitary conveyor systems, and a new line of can conveyance for the can making industry, Busse/SJI bulk palletizers and depalletizers, Busse/SJI warmers, coolers and pasteurizers, Priority One conventional and robotic case palletizers. A & B Engineering Services is the consolidated support group that services the entire family of Arrowhead Systems products and also provides essential services such as installation, training, line audits, retrofit kits, upgrades and spare parts. In addition to operating three manufacturing sites, Arrowhead Systems also maintains a technical center in Clio, MI to support the operations of the individual manufacturing sites. Arrowhead Systems serves countries around the globe with a group of dedicated sales professionals, experienced service technicians, and a network of independent agents.
More
Show less