---

Air National Guard Units is Hiring a SHEET METAL MECHANIC (AIRCRAFT) Near Lincoln, NE

Qualifications:

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is a Title 32 excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.

FOR QUESTIONS REGARDING ELIGIBILITY TO JOIN THE NEBRASKA AIR NATIONAL GUARD PLEASE CONTACT THE LOCAL RECRUITING OFFICE AT 402-309-1172.

OPEN AREAS OF CONSIDERATION: AREA 1, 2 and 3

DEFINITION OF AREA(S) OF CONSIDERATION:
AREA 1: Current permanent and indefinite technicians of the Nebraska Army or Air National Guard; and current Title 5 employees of the Nebraska Military Department who are military members of the Nebraska National Guard.
AREA 2: All Drill Status/M-Day members and temporary technicians of the Nebraska Air or Army National Guard.
AREA 3: Current military service members who are willing and eligible to become members of the Nebraska Air or Army National Guard.
AREA 4: All qualified candidates eligible and willing to become a member of the Nebraska National Air or Army National Guard prior to the effective date of hire.

MILITARY REQUIREMENTS:

Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the Nebraska Air National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Military Grades: Maximum: E6; Minimum: E1; Military Grade inversion within the full time work forces is not permitted. The military grade of the full time supervisor must equal or exceed the military grade of the personnel supervised.

Military Compatibility: Compatibility will be followed in accordance with 32 USC 709(b) and 10 USC 10216Compatibility requirements must be met prior to appointment to the position. Selectee has 24 months to become qualified in a compatible military assignment.

Security Clearance/Background Check requirements:
In order to comply with US DOD requirements and ensure the safety and security of the missions, programs, property and personnel of the Nebraska Military Department, employees must obtain the appropriate background investigation and maintain the level of security clearance assigned to their respective work.

Failure to obtain, within one year of appointment, and maintain the designated type of security clearance/background check required for the respective work may result in a job offer being rescinded, separations of employment, or other actions as may be deemed in the best interest of the agency.

Prior to appointment individuals must meet the security clearance requirements for the position or submit the required documents of the Nebraska National Guard, Personnel Security Manager for processing the appropriate investigation. Required forms: SF86, PSIP Initiation Form, Fingerprints, OF306 and Application/Resume.

Nebraska National Guard Information Security Specialist - jason.l.shroeder4.civ@mail.mil; 402-309-1129.

GENERAL EXPERIENCE: Experience or training that has provided the candidate with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double or grooved seams.

SPECIALIZED EXPERIENCE:
WG-05 - Must possess 6 months experience or training which demonstrates the ability to use common hand tools, power tools, measuring instruments and make repetitive repairs. Must have basic knowledge of the type of work performed by the occupational series. Provide assistance to the journeyman by performing the simpler and routine duties of the trade.
WG-08 - Must possess 12 months experience or training planning, manufacturing, and installing cylindrical, square, or rectangular-shaped objects that have easily constructed fastening. Experience cutting and forming by using basic hand and powered tools such as hammers, chisels, hand snips, band and circle saws, squaring shears, seamers, bar folders, breaks, and stakes. Experience assembling parts by seaming, bolting, screwing, riveting, tacking, spot-welding, or soldering. Experience demonstrating a basic understanding of using measuring instruments.
WG-10 - Must Possess 18 months experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments.

Responsibilities:

As a SHEET METAL MECHANIC (AIRCRAFT), WG-3806-5/8/10, duties include:

(1) Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red'X' conditions.

(2) Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight.

(3) Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metalworking equipment. Determines shear and bearing load factors during rivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles.

(4) Aligns and balances component structures and air frame using precision measuring instruments and levels. Performs metal-to-metal bonding where delamination of surfaces and core material occurs in control surfaces.

(5) Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and non powered tools and equipment. Repairs or replaces retaining frames and installs plastic laminated blanks. Designs and constructs forming fixtures.

(6) Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Fabricates and repairs flexible control cables.

(7) Performs fabrication of local manufactured items requited for aircraft and equipment. Work includes layout, bending, cutting, forming and assembling. Devise and calculates patterns employing the principles of triangulation, radial and parallel line development.

(8) Sets up and operates power shears, brakes, rolls, dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal working equipment, including use of other tools of the trade. Requisitions necessary supplies and equipment for the activity.

(9) Prepares and designs layout, dies, jigs, and templates necessary to carry out fabrication repair or modification of aircraft, engine, AGE, and other equipment. Works from blueprints, technical orders diagrams, and work orders.

(10) Identifies metal corrosion. Performs necessary testing to identify type corrosion present by examination with magnifying equipment, chemical and mechanical methods and treats aircraft engines, in accordance with applicable technical publications. Ensures that work assignments received from supervisor or maintenance control are accomplished in a timely manner.

(11) Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such as acids and caustics for passivation and etching, to protect metal from oxidation. Performs such functions as pickling of metals to prepare for good bonding with primer coat of protective materials.

(12) Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Uses conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings.(

13) Identifies, blends, stores, controls, and disposes of hazardous materials such as acids, caustics, alcohols, solvents,cleaners, primers and surface coatings used for corrosion removal, treatment and protection in accordance with applicable directives.

(14) May operate the wash rack. Accomplishes corrosion and washing inspections within schedule provided to ensure compliance withthe monthly and weekly maintenance plan. May conduct training on proper methods and procedures of wash rack operations.

(15) May assist in training of drill status guard members and in maintenance of publication files of applicable technical orders,regulations, manuals and local directives.

(16) Performs other duties as assigned.

Job Summary