What are the responsibilities and job description for the Avionics Technician position at Yingling Aviation?
This job was posted by https://www.kansasworks.com : For more
information, please see: https://www.kansasworks.com/jobs/13567766
Independently operate, install, adjust, and maintain integrated
computer/communications systems, consoles, simulators, and
instrumentation used for air and space vehicle launch, tracking,
positioning, and evaluation. Configure and troubleshoot data acquisition
and test measurement equipment without supervision. Accurately record,
analyze, and interpret complex test data for engineering evaluation and
mission readiness. Apply standard procedures to ensure system
performance and reliability.
Basic understanding of wiring diagrams and methodology: wire marking,
wire routing clamping, symbols, and simple interconnect diagrams,
bonding/grounding
Basic understanding of parts handling and disposition
Basic knowledge of electricity
Basic Understanding Of Avionics Hardware Removal And Replacement
equipment racks, mounting structures, standard fasteners
Documentation and Regulatory Compliance: understand and use of MM
manuals and company paperwork such as removals and squawk sign off.
Understanding and able to use computer systems such as Corridor, ATP,
Textron One view.
Basic Understanding of Avionics test equipment: Multimeter, Laversab Air
data tester, Barfield Air data tester, Druck Air data tester, GE Air
data tester, IFR4000/6000, TRX
Thoroughly understand the fundamental principles and accurately
demonstrate the correct procedures for grounding an aircraft.
Demonstrate the proper procedures and safety precautions to apply power
to an aircraft
Perform an acceptance inspection for newly arriving aircraft.
Perform an inventory of aircraft equipment.
Demonstrate a thorough understanding of the fundamental principles and
correctly perform the procedures for removing and replacing avionics
hardware.
Demonstrate a thorough understanding of fundamental principles and
accurately perform the proper procedures for installing airframe
components.
Exhibit in-depth knowledge of torque principles and correctly apply
proper torquing procedures for threaded fasteners and plumbing lines.
Fully understand and correctly execute the procedures for inspecting,
removing, and installing safety devices, including AMSafe components.
Ability to safely operate a digital or analog multimeter to measure
voltage, resistance, and continuity in avionics circuits. Understanding
test lead configuration, range selection, and safety precautions. Can
interpret basic readings and identify common faults in wiring or
components with minimal guidance.
Able to set up and operate the Laversab Air Data Test Set for
pitot-static system checks. Understands basic test sequences, menu
navigation, pressure calibration functions, and can verify airspeed,
altitude, and vertical speed parameters. Can detect leaks or
discrepancies and interpret displayed data under supervision.
Proficient in configuring and using the Barfield Air Data Tester to
simulate and verify pitot-static inputs. Understands connections to
aircraft test ports, performs altitude and airspeed sweeps, and monitors
pressure decay/leakage. Able to operate the tester through standard
procedures and recognize abnormal responses during functional tests.
Capable of independently performing basic test functions with the Druck
unit, including automated test scripts for altimetry, airspeed
indicators, and static systems. Understands parameter input, reference
value comparison, and test documentation. Can troubleshoot common
interface or pressure issues.
Understands the operational workflow of the GE Air Data Tester,
including initiating and controlling tests for pitot-static validation.
Able to conduct altitude and airspeed checks, input test parameters, and
interpret test results in relation to maintenance manuals. Can assist
with calibration procedures and report data accurately.
Demon trates the ability to set up and operate the IFR4000/6000 or TRX
test sets to evaluate transponder, DME, TCAS, and communication systems.
Understands test modes, antenna connections, and functional test
procedures per manufacturer specifications. Can interpret pass/fail
results, adjust signal parameters, and verify system compliance with
minimal oversight.
Able to configure and operate a TCAS test set to perform system
interrogations, verify bearing accuracy, and simulate traffic scenarios.
Understand aircraft interface connections, test range limits, and can
evaluate system response under test conditions. Capable of identifying
common system faults and validating TCAS functionality in line with
maintenance procedures.
Comprehend in depth the basic principles and demonstrate, to a high
degree of proficiency, the ability to use a volt / ohmmeter.
Comprehend in depth the basic principles and demonstrate, to a high
degree of proficiency, the ability to perform slip torque checkout of
autopilot servos
Installs various communication / navigation equipment
Fabricates electrical connectors and wire bundles
Fabricate Coax Cable assemblies and terminations
Evaluates installed equipment with various types of test equipment
Understands int
information, please see: https://www.kansasworks.com/jobs/13567766
Independently operate, install, adjust, and maintain integrated
computer/communications systems, consoles, simulators, and
instrumentation used for air and space vehicle launch, tracking,
positioning, and evaluation. Configure and troubleshoot data acquisition
and test measurement equipment without supervision. Accurately record,
analyze, and interpret complex test data for engineering evaluation and
mission readiness. Apply standard procedures to ensure system
performance and reliability.
Basic understanding of wiring diagrams and methodology: wire marking,
wire routing clamping, symbols, and simple interconnect diagrams,
bonding/grounding
Basic understanding of parts handling and disposition
Basic knowledge of electricity
Basic Understanding Of Avionics Hardware Removal And Replacement
equipment racks, mounting structures, standard fasteners
Documentation and Regulatory Compliance: understand and use of MM
manuals and company paperwork such as removals and squawk sign off.
Understanding and able to use computer systems such as Corridor, ATP,
Textron One view.
Basic Understanding of Avionics test equipment: Multimeter, Laversab Air
data tester, Barfield Air data tester, Druck Air data tester, GE Air
data tester, IFR4000/6000, TRX
Thoroughly understand the fundamental principles and accurately
demonstrate the correct procedures for grounding an aircraft.
Demonstrate the proper procedures and safety precautions to apply power
to an aircraft
Perform an acceptance inspection for newly arriving aircraft.
Perform an inventory of aircraft equipment.
Demonstrate a thorough understanding of the fundamental principles and
correctly perform the procedures for removing and replacing avionics
hardware.
Demonstrate a thorough understanding of fundamental principles and
accurately perform the proper procedures for installing airframe
components.
Exhibit in-depth knowledge of torque principles and correctly apply
proper torquing procedures for threaded fasteners and plumbing lines.
Fully understand and correctly execute the procedures for inspecting,
removing, and installing safety devices, including AMSafe components.
Ability to safely operate a digital or analog multimeter to measure
voltage, resistance, and continuity in avionics circuits. Understanding
test lead configuration, range selection, and safety precautions. Can
interpret basic readings and identify common faults in wiring or
components with minimal guidance.
Able to set up and operate the Laversab Air Data Test Set for
pitot-static system checks. Understands basic test sequences, menu
navigation, pressure calibration functions, and can verify airspeed,
altitude, and vertical speed parameters. Can detect leaks or
discrepancies and interpret displayed data under supervision.
Proficient in configuring and using the Barfield Air Data Tester to
simulate and verify pitot-static inputs. Understands connections to
aircraft test ports, performs altitude and airspeed sweeps, and monitors
pressure decay/leakage. Able to operate the tester through standard
procedures and recognize abnormal responses during functional tests.
Capable of independently performing basic test functions with the Druck
unit, including automated test scripts for altimetry, airspeed
indicators, and static systems. Understands parameter input, reference
value comparison, and test documentation. Can troubleshoot common
interface or pressure issues.
Understands the operational workflow of the GE Air Data Tester,
including initiating and controlling tests for pitot-static validation.
Able to conduct altitude and airspeed checks, input test parameters, and
interpret test results in relation to maintenance manuals. Can assist
with calibration procedures and report data accurately.
Demon trates the ability to set up and operate the IFR4000/6000 or TRX
test sets to evaluate transponder, DME, TCAS, and communication systems.
Understands test modes, antenna connections, and functional test
procedures per manufacturer specifications. Can interpret pass/fail
results, adjust signal parameters, and verify system compliance with
minimal oversight.
Able to configure and operate a TCAS test set to perform system
interrogations, verify bearing accuracy, and simulate traffic scenarios.
Understand aircraft interface connections, test range limits, and can
evaluate system response under test conditions. Capable of identifying
common system faults and validating TCAS functionality in line with
maintenance procedures.
Comprehend in depth the basic principles and demonstrate, to a high
degree of proficiency, the ability to use a volt / ohmmeter.
Comprehend in depth the basic principles and demonstrate, to a high
degree of proficiency, the ability to perform slip torque checkout of
autopilot servos
Installs various communication / navigation equipment
Fabricates electrical connectors and wire bundles
Fabricate Coax Cable assemblies and terminations
Evaluates installed equipment with various types of test equipment
Understands int