What are the responsibilities and job description for the Mechanic I - 618 - Fleet Maintenance (Multiple Positions) position at WICHITA COMPANY LIMITED?
This job was posted by https://www.kansasworks.com : For more
information, please see: https://www.kansasworks.com/jobs/13440270
**The City of Wichita is NOT an E-Verify Employer.**
assisted, and sometimes inspected by a higher-level mechanic or a
supervisor.
servicing transmissions, lubricating chassis and drive lines.
the repairs made.
vehicles and equipment.
**Requirements of Work**
Thorough knowledge of all tools and equipment used in the trade and the
ability to use these tools to perform repair work on vehicles/equipment.
Knowledge of occupational hazards and safety precautions.
Ability to weld and cut using gas or electrical equipment.
Ability to read, interpret, and apply information contained in technical
repair manuals and electronic diagnostic equipment.
Ability to climb onto equipment and make repairs as high as 25\' in
height.
Ability to lift, bend, and twist while making repairs to vehicles and
heavy equipment.
Ability to tow downed vehicles and equipment
Ability to tolerate exposure to fluids and solvents in vehicle repair
work.
Ability to perform continuous manual and physical labor while standing
on cement floor.
Ability to lift and carry bulky objects weighing up to 50 pounds
(heavier objects with the assistance of another person) for distances up
to 100 feet
Ability to exert up to 100 pounds of pressure using tools that tighten,
loosen, or cut.
Ability to develop and maintain effective working relationships with
associates and employees of other departments.
Ability to communicate clearly and effectively orally or in writing.
A valid Kansas driver\'s license is required.
A valid Kansas commercial driver\'s license (CDL) is required.
Compliance with ASE policy will be required at time of hire and
throughout duration of employment.
Possession of at least two eligible ASE certifications when hired.
Will require ASE certification attainment consistent with ASE policy.
Preferred Certifications From Tracs A, E, L And T.
Skill set will be the primary factor in determining hire, promotion, and
transfer decisions between shops.
There are five shops that specialize in the maintenance of heavy
equipment, light vehicles, fire assets, body shop repairs, and light
equipment.
Staff assigned to the Heavy Equipment shop shall have extensive
knowledge of di sel engines, as well as other equipment that is
maintained in this shop.
Staff assigned to the Light Vehicle shop shall have extensive knowledge
of passenger vehicles and other assets that are maintained in this shop.
Staff assigned to the Fire Maintenance shop shall have extensive
knowledge of fire apparatus and maintenance practices.
Staff assigned to the Body Shop shall have extensive knowledge of the
repair of vehicles damaged in accidents.
Staff assigned to the Light Equipment shop shall have extensive
knowledge of mowers, park maintenance equipment, and other assets that
are maintained in this shop.
Transfer decisions between these shops will be based on skill set, shop
coverage, workflow, and the overall needs of the Division.
An employee shall not pose a direct threat to the health or safety of
other individuals in the workplace.
Public Works & Utilities is responsible for the operation of many
critical systems, such as water and wastewater treatment, the City\'s
transportation netw
information, please see: https://www.kansasworks.com/jobs/13440270
**The City of Wichita is NOT an E-Verify Employer.**
- Distinguishing Features of Work\
- This is technical work in the repair and preventive maintenance of
assisted, and sometimes inspected by a higher-level mechanic or a
supervisor.
- \*\*Posting may come down at any time\*\***
- Completes preventive maintenance on vehicles, trailers, or heavy
servicing transmissions, lubricating chassis and drive lines.
- Performs engine diagnostics with scan tools or laptop computers.
the repairs made.
- Remove and replace parts and components as necessary, to repair
- Remove, replace, and modify as necessary, mufflers, tailpipes, and
- Inspect, adjust, and repair as necessary, air and hydraulic brake
- Inspect adjust and repair as necessary, heating and air conditioning
- Inspect adjust and repair as necessary, driveline and suspension
- Assists with the removal, repair, or rebuilding, of diesel and gas
- Assists with the repair of hydraulic systems including hydraulic
vehicles and equipment.
- Tow vehicles and equipment using a roll back and sling type wrecker
- Maintains written record of work performed.
- Completion of work assignments will require the operation of a
- These examples are not intended to be all-inclusive. Other related
**Requirements of Work**
Thorough knowledge of all tools and equipment used in the trade and the
ability to use these tools to perform repair work on vehicles/equipment.
Knowledge of occupational hazards and safety precautions.
Ability to weld and cut using gas or electrical equipment.
Ability to read, interpret, and apply information contained in technical
repair manuals and electronic diagnostic equipment.
Ability to climb onto equipment and make repairs as high as 25\' in
height.
Ability to lift, bend, and twist while making repairs to vehicles and
heavy equipment.
Ability to tow downed vehicles and equipment
Ability to tolerate exposure to fluids and solvents in vehicle repair
work.
Ability to perform continuous manual and physical labor while standing
on cement floor.
Ability to lift and carry bulky objects weighing up to 50 pounds
(heavier objects with the assistance of another person) for distances up
to 100 feet
Ability to exert up to 100 pounds of pressure using tools that tighten,
loosen, or cut.
Ability to develop and maintain effective working relationships with
associates and employees of other departments.
Ability to communicate clearly and effectively orally or in writing.
A valid Kansas driver\'s license is required.
A valid Kansas commercial driver\'s license (CDL) is required.
Compliance with ASE policy will be required at time of hire and
throughout duration of employment.
Possession of at least two eligible ASE certifications when hired.
Will require ASE certification attainment consistent with ASE policy.
Preferred Certifications From Tracs A, E, L And T.
Skill set will be the primary factor in determining hire, promotion, and
transfer decisions between shops.
There are five shops that specialize in the maintenance of heavy
equipment, light vehicles, fire assets, body shop repairs, and light
equipment.
Staff assigned to the Heavy Equipment shop shall have extensive
knowledge of di sel engines, as well as other equipment that is
maintained in this shop.
Staff assigned to the Light Vehicle shop shall have extensive knowledge
of passenger vehicles and other assets that are maintained in this shop.
Staff assigned to the Fire Maintenance shop shall have extensive
knowledge of fire apparatus and maintenance practices.
Staff assigned to the Body Shop shall have extensive knowledge of the
repair of vehicles damaged in accidents.
Staff assigned to the Light Equipment shop shall have extensive
knowledge of mowers, park maintenance equipment, and other assets that
are maintained in this shop.
Transfer decisions between these shops will be based on skill set, shop
coverage, workflow, and the overall needs of the Division.
An employee shall not pose a direct threat to the health or safety of
other individuals in the workplace.
Public Works & Utilities is responsible for the operation of many
critical systems, such as water and wastewater treatment, the City\'s
transportation netw
OTR Fleet Mechanic
Jacam Catalyst -
Sterling, KS
Maintenance Mechanic
Creekstone Farms Premium Beef -
Arkansas, KS
Maintenance Mechanic
Valmont Industries -
El Dorado, KS