What are the responsibilities and job description for the Machine Operator - ATN position at BROE Group and it's managed affiliates?

POSITION SUMMARY

The Machine Operator safely operates specialized machinery for railroad track construction or repair. Drives company vehicles and operates any heavy equipment needed for specified tasks designated by the Roadmaster. Performs other track maintenance related tasks as needed.

The Machine Operator demonstrates and adheres to the company values of: safety, honesty, ownership, respect and teamwork to ensure successful partnerships with customers and employees that result in OmniTRAX’s continued success.

ESSENTIAL RESPONSIBILITIES

Ensure compliance with all railroad rules and regulations for safety, operations and the Federal Railroad Administration (FRA)
Work safely in a construction field environment following safety rules; carry out work in manner that promotes safe work environment
Drive company vehicles including, but not limited to: Backhoe, Grapple Truck, Boom Truck and Tamper
Considered an expert in operating all CDL equipment, and handles all advanced operating duties
Perform CDL work to meet qualifications of the FMCSA Code of Federal Regulations (CFR) Subpart B: Qualification and Disqualification of Drivers and other regulations as applicable, including but not limited to, Part §391.11
Raise rail: use track jack to facilitate removal and installation of railroad ties
Drill holes through rails for insertion of bolts: operate power drill
Operate track-wrench machine to tighten or loosen bolts at rail joints

Operate rail saw to cut rails to specified length
Operate spike pullers, spike drivers to perform construction and maintenance tasks associated with railroad tracks

OTHER DUTIES

Work safely to prevent on the job accidents and injuries
Wear required protective equipment (PPE) such as: hard hats, hearing protection, safety-toe boots, safety glasses etc.
Work hours may include a nonstandard workweek, overtime and various shift work
Perform other duties and projects as assigned

SUPERVISORY RESPONSIBILITIES

None

REQUIRED QUALIFICATIONS, KNOWLEDGE, SKILLS, AND ABILITIES

High School Diploma/GED
1 year of track maintenance experience
1 year of heavy equipment operation to include: Backhoe, Grapple Truck, Boom Truck and Tamper
Operate hand tools, including: wrenches, sockets, screwdrivers, measuring tapes, etc.
Operate power tools and hydraulic equipment, including: portable grinders, rail saws, spike pullers, track wrench machines, power drills
Apply commonsense understanding to carry out detailed, but uninvolved written or oral instructions
Perform concepts of basic shop math, calculate figures and amounts such as: area, circumference, length, distance, and volume
Write legible to complete routine reports, and complete required testing
Effectively communicate with all level of employees and business associates in a clear, concise and professional manner
Read, comprehend and comply with published rules, procedures and manuals, inspection checklists, government regulations, operating and maintenance instructions, memos and other work-related information
Familiar with FRA Track Safety standards
Familiar with Roadway Worker’s Protection (RWP)
Demonstrate problem solving and troubleshooting skills resulting in effective resolution
Basic computer skills
Professional integrity and accountability
Work in fast-paced collaborative environment

REQUIRED CERTIFICATIONS AND LICENSES

Valid CDL A Driver’s License; pass medical certification and Drivers Qualification File, pass DOT Drug & Alcohol
Roadway Worker Protection Qualified

PREFERRED QUALIFICATIONS, KNOWLEDGE, SKILLS, AND ABILITIES

Previous experience in Rail Transportation, Supply Chain Logistics, Manufacturing and/or Oil & Gas industries

PREFERRED CERTIFICATIONS AND LICENSES

Qualify in Track Inspection as required by FRA

WORK ENVIRONMENT

Exposure to hot, cold, wet, humid or windy conditions caused by the weather including: snow, rain, heat and sub-freezing temps

TRAVEL

Daily travel as business requires during scheduled work hours

PHYSICAL REQUIREMENTS

Strength	Frequency	Weight/ Force	Side	Parameters
Occ	Freq	Cons	Height From	Height To
Lifting - "136-pound Plate"	X			18.9 lb	Two Hands	0 in	40 in
Lifting - Lining Bar	X			26 lb	Two Hands	0 in	40 in
Lifting - Claw Bar	X			30.7 lb	Two Hands	0 in	60 in
Lifting - Impact Wrench	X			31 lb	Two Hands	0 in	40 in
Lifting - Portable Derail	X			44.3 lb	Two Hands	0 in	40 in
Lifting - Track Jack	X			48.5 lb	Two Hands	0 in	40 in
Lifting - Compromise Bar (136/115)	X			53.8 lb	Two Hands	0 in	40 in
Lifting - 136-pound Angle Bar	X			56.1 lb	Two Hands	0 in	40 in
Lifting - 136-pound Angle Bar	X			58.8 lb	Two Hands	0 in	40 in
Lifting - Tools, Parts and Equipment	X			65 lb	Two Hands	0 in	60 in

Strength	Frequency	Weight/ Force	Side	Height	Rotation	Grip Pattern	Hand Spread
Occ	Freq	Cons
Pushing - Manual Track Wrench	X			106 lb	Two Hands	35 in	Neutral	Cylinder
Pushing - Spike Puller/Claw Bar	X			118.8 lb	Two Hands	Waist	Pronated	Hook
Pushing - Ergo Bow Switch	X			133.7 lb	Two Hands	35 in	Neutral	Cylinder
Pulling - Hydraulic Spike Driver	X			60.5 lb	Two Hands	26 in	Pronated	Cylinder	13 in
Pulling - Hydraulic Spike Puller	X			63.9 lb	Two Hands	34 in	Pronated	Cylinder	10 in
Pulling - Ergo Bow Switch	X			75.1 lb	Two Hands	35 in	Neutral	Cylinder
Pulling - High Stand Switch	X			87 lb	Two Hands	36 in	Pronated	Cylinder
Pulling - Rail Turner 39-foot Rail (90 lb)	X			88.3 lb	Two Hands	Waist	Neutral	Cylinder
Pulling - 10-Foot Tie with Tie Tongs	X			119.1 lb	Two Hands	30 in	Neutral	Hook
Pulling - Drag 10-Foot Tie with Tie Tongs	X			174.7 lb	Two Hands	25 in	Neutral	Hook

Upper Body	Frequency	Description
Occ	Freq	Cons
Reaching - Below Knee	X		Extending hand(s) and arm(s) below the level of the knee.
Reaching - Over Shoulder	X		Extending hand(s) and arm(s) above shoulder level.
Reaching - Knee to Shoulder		X	Extending hand(s) and arm(s) between knee and shoulder level.
Handling - Both		X	Seizing, holding, grasping, turning, or otherwise working with hands.
Fingering - Fine Motor Manipulation	X		Picking, pinching, or otherwise working primarily with fingers.
Cervical Flexion/Extension		X	Flexing and/or extending at the cervical spine.
Rotation - Cervical	X		Rotating at the cervical spine.
Rotation - Thoracic & Lumbar	X		Rotating at the thoracic and lumbar spine.

Lower Body	Frequency	Description
Occ	Freq	Cons
Sitting	X			Remaining in a seated position.
Standing		X		Remaining on one’s feet in an upright position without moving about.
Walking		X		Moving about on foot. Walk on uneven surfaces.
Climbing	X			Ascending or descending between two points.
Balancing			X	Maintaining body equilibrium to prevent falling.
Stooping	X			Bending body forward by bending spine at the waist.
Kneeling - Two Knees	X			Bending legs at knees to come to rest on one or both knees.
Crouching/Squatting	X			Bending body downward and forward by bending legs and spine.

*Occ = Occasional; defined as 1-33% of a usual and customary workday.

*Freq = Frequent; defined as 34-66% of a usual and customary workday.

*Cons = Constant; defined as 67-100% of a usual and customary workday.

** Not all tasks required at each location. Position and physical demand is representative, but individualized assessment may be necessary.

Apply for this job

Receive alerts for other Machine Operator - ATN job openings

Machine Operator - ATN