What are the responsibilities and job description for the Metrology Quality Inspector position at Aero-Mach Labs Inc.?
This job was posted by https://www.kansasworks.com : For more
information, please see: https://www.kansasworks.com/jobs/13543027
performing the following duties. Works under supervision of Quality
Manager.
duration of the certificate, and date for recertification.
standards by maintaining accurate records along with the history of
the equipment.
satisfactorily. The requirements listed below are representative of the
knowledge, skill, competency, and/or ability required. Reasonable
accommodations may be made to enable individuals with disabilities to
Perform The Essential Functions.
High school diploma or general education degree (GED); and one to three
years previous electronics experience; or equivalent combination of
training, and experience. One to three years of mechanical
Experience/knowledge Also Is Preferred.
Ability to apply basic math, including adding, subtracting, multiplying,
and dividing in all units of measure, using whole numbers, common
fractions, and decimals.
Ability to communicate verbally in one-on-one situations with management
and co-workers, including the ability to speak simple sentences; listens
to others without interrupting and gets clarification when needed.
Ability to read and comprehend instructions, work orders, and memos.
Ability to read and understand blue prints and equipment manuals.
Ability to write simple correspondence.
Ability to apply common sense understanding to carry out simple
instructions and procedures furnished in written, oral, or diagram form.
Ability to deal with problems involving a few concrete variables in
standardized situations. Ability to perform repetitive tasks.
To perform this job successfully, an individual should be familiar with
a diverse range of measurement tools and equipment. Standards and
reference tools can include handheld manual gauges such as calipers,
micrometers, dial gages, Go/No-Go gages, gage blocks, height gages,
feeler gages, etc. to electrical measurement equipment such as
multimeters, oscilloscopes, frequency counters, function generators,
hipot testers, megohmmeters, milliohm meters, multifunction calibrators,
digital weight scales, force gages, power supplies, etc. along with
several types of pneumatic gages for pressure and vacuum measurement.
These tools ensure that manufactured parts meet precise design
specifications and maintain global standards of accuracy.
Ability to interact in a positive and professional manner and to develop
and maintain strong working relationships with co-workers and
supervisors.
Strong attention to detail and focus on quality and accuracy.
Exhibits dependability, including following instructions; responding to
supervisors direction; and taking responsibility for own actions.
Ability to take initiative, including asking for and offering help when
needed; performs work independently without being prompted.
Ability to prioritize and plan work activities; use time efficiently;
and work within deadlines.
The physical demands described here are representative of those that
must be met by an employee to successfully perform the essential
functions of this job. Reasonable accommodation may be made to enable
Individuals With Disabilities To Perform The Essential Functions. While
performing the duties of this job, the employee is regularly required to
stand and use hands to finger, handle, or feel. The employee is
frequently required to talk or hear. The employee must frequently lift
and/or move up to 20 pounds and occasionally lift and/or move up to 50
pounds. The employee must occasionally kneel or crouch. Specific vision
abilities required include close vision and the ability to distinguish
color for inspection of electronic components and wiring.
The work environment characteristics described are representative of
those an employee encounters while performing the essential functions of
this job. Reasonable accommodations may be made to enable individuals
With Disabilities To Perform The Essential Functions. While Performing
the duties of this job, the employee is regularly exposed to work near
moving mechanical parts. The noise level in the work environmen
information, please see: https://www.kansasworks.com/jobs/13543027
- Job Purpose:** Inspects test equipment for proper manufacturing,
performing the following duties. Works under supervision of Quality
Manager.
- Essential Functions** include the following. Other duties may be
- Maintains proper files, card index and paperwork on each piece of
duration of the certificate, and date for recertification.
- Organizes the test equipment that cannot be certified in house to be
- Maintains all standards used in the Metrology Lab to be calibrated
standards by maintaining accurate records along with the history of
the equipment.
- Reviews specifications and identifies equipment equivalencies that
- Builds and designs test equipment as per specifications.
- Compiles monthly reports of test equipment to be calibrated and
- Qualifications and Requirements**: To perform this job successfully,
satisfactorily. The requirements listed below are representative of the
knowledge, skill, competency, and/or ability required. Reasonable
accommodations may be made to enable individuals with disabilities to
Perform The Essential Functions.
High school diploma or general education degree (GED); and one to three
years previous electronics experience; or equivalent combination of
training, and experience. One to three years of mechanical
Experience/knowledge Also Is Preferred.
Ability to apply basic math, including adding, subtracting, multiplying,
and dividing in all units of measure, using whole numbers, common
fractions, and decimals.
Ability to communicate verbally in one-on-one situations with management
and co-workers, including the ability to speak simple sentences; listens
to others without interrupting and gets clarification when needed.
Ability to read and comprehend instructions, work orders, and memos.
Ability to read and understand blue prints and equipment manuals.
Ability to write simple correspondence.
Ability to apply common sense understanding to carry out simple
instructions and procedures furnished in written, oral, or diagram form.
Ability to deal with problems involving a few concrete variables in
standardized situations. Ability to perform repetitive tasks.
To perform this job successfully, an individual should be familiar with
a diverse range of measurement tools and equipment. Standards and
reference tools can include handheld manual gauges such as calipers,
micrometers, dial gages, Go/No-Go gages, gage blocks, height gages,
feeler gages, etc. to electrical measurement equipment such as
multimeters, oscilloscopes, frequency counters, function generators,
hipot testers, megohmmeters, milliohm meters, multifunction calibrators,
digital weight scales, force gages, power supplies, etc. along with
several types of pneumatic gages for pressure and vacuum measurement.
These tools ensure that manufactured parts meet precise design
specifications and maintain global standards of accuracy.
Ability to interact in a positive and professional manner and to develop
and maintain strong working relationships with co-workers and
supervisors.
Strong attention to detail and focus on quality and accuracy.
Exhibits dependability, including following instructions; responding to
supervisors direction; and taking responsibility for own actions.
Ability to take initiative, including asking for and offering help when
needed; performs work independently without being prompted.
Ability to prioritize and plan work activities; use time efficiently;
and work within deadlines.
The physical demands described here are representative of those that
must be met by an employee to successfully perform the essential
functions of this job. Reasonable accommodation may be made to enable
Individuals With Disabilities To Perform The Essential Functions. While
performing the duties of this job, the employee is regularly required to
stand and use hands to finger, handle, or feel. The employee is
frequently required to talk or hear. The employee must frequently lift
and/or move up to 20 pounds and occasionally lift and/or move up to 50
pounds. The employee must occasionally kneel or crouch. Specific vision
abilities required include close vision and the ability to distinguish
color for inspection of electronic components and wiring.
The work environment characteristics described are representative of
those an employee encounters while performing the essential functions of
this job. Reasonable accommodations may be made to enable individuals
With Disabilities To Perform The Essential Functions. While Performing
the duties of this job, the employee is regularly exposed to work near
moving mechanical parts. The noise level in the work environmen