What are the responsibilities and job description for the Lead Process Technician position at PRISM Plastics, Inc.?
Prism Plastics, Inc.
As a part of the global industrial organization Marmon Holdings—which is backed by Berkshire Hathaway—you’ll be doing things that matter, leading at every level, and winning a better way. We’re committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone’s empowered to be their best.
2nd Shift Lead Process Technician - 3:00 p.m. to 11:00 p.m.
Primary Responsibilities
Oversee/Manage your specific shifts operations.
Assure plant floor is operating at peak productivity, as exhibited by:
Established limits and guidelines for approved process – Process Monitoring.
Assuring the floor is in control and not starting the next shift in an out-of control state.
Stay until which time the above items are covered, and/or the next shift (your customer) approves your departure.
Assist in quality related tasks (sorting, increased inspection, GR&R’s, Cpk Studies, etc.) as required.
Assist in warehouse management (raw and finished goods movement).
Assist in the maintenance of tooling and equipment as required.
Assist in pulling finished goods materials for shipment as required.
Assist in other job-related activities to help support a clean, safe and affective organization.
Training And Work Experience Preferred
Occasionally 1-33%
Frequently 34-66%
Regularly 67 - 100%
Essential Physical Demands
Activity
Frequency
Close vision
(clear vision at 20 inches or less)
Distance vision
(clear vision at 20 feet or more)
Color vision
(ability to identify and distinguish colors)
Peripheral vision
(ability to observe an area that can be seen up and down or the left and right while eyes are fixed on a given point)
Depth perception
(three-dimensional vision, ability to judge distances and spatial relationships)
No special vision requirements
Tools/Equipment Used
Very Quiet
Quiet
Moderate Noise
Loud Noise
Very Loud Noise
This class specification should not be interpreted as all-inclusive. It is intended to identify the essential functions and requirements of this job. Individuals may be requested to perform job-related responsibilities and tasks other than those stated in this specification. Any essential function or requirement of this class will be evaluated as necessary should an individual be unable to perform the function or requirement due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the individual when possible.
Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law.
We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to careers@marmon.com, and please be sure to include the title and the location of the position for which you are applying.
As a part of the global industrial organization Marmon Holdings—which is backed by Berkshire Hathaway—you’ll be doing things that matter, leading at every level, and winning a better way. We’re committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone’s empowered to be their best.
2nd Shift Lead Process Technician - 3:00 p.m. to 11:00 p.m.
Primary Responsibilities
Oversee/Manage your specific shifts operations.
Assure plant floor is operating at peak productivity, as exhibited by:
- A safe, clean and accident free environment.
- Thorough and quick mold changes.
- Successful startup, bucket length and shutdown quality.
- Maximize the shifts GPPH (good parts per hour) output.
- Assure thorough parting line cleanings are performed at least once per shift, more depending on the specific product.
- Assure product quality through the use of machine process limits, machine auto reject alarms, and part inspection to the control plan. This is accomplished through the use of: Strict adherence to the First and Last Shot Check sheet.
Established limits and guidelines for approved process – Process Monitoring.
- Participation in both the Manufacturing Team Meetings and the monthly Quality Operating System meetings, as well as communicating metrics and their impact on them to your direct reports.
- Successful shift hand-off to your customer (the next shift), by: Assuring raw materials (resin, components and packaging) are in place for a minimum of four hours into the next shift.
Assuring the floor is in control and not starting the next shift in an out-of control state.
Stay until which time the above items are covered, and/or the next shift (your customer) approves your departure.
- Complete employee evaluations for subordinates.
- Establish, Maintain and Evaluate effectiveness of authored work instructions. Looking for ways to continuously improve all areas related to manufacturing.
- Molding Process Setup (In Mold Rheology, 95% fill at transfer, etc.)
- Robot Programming and Modification
- Cell setup (Tooling, Material Drying, Hot Runner, TCU, etc.)
Assist in quality related tasks (sorting, increased inspection, GR&R’s, Cpk Studies, etc.) as required.
Assist in warehouse management (raw and finished goods movement).
Assist in the maintenance of tooling and equipment as required.
Assist in pulling finished goods materials for shipment as required.
Assist in other job-related activities to help support a clean, safe and affective organization.
Training And Work Experience Preferred
- A minimum of five years of applicable work experience.
- Experience with computer and/or computer related systems.
- Robotics and/or automation experience.
- High school diploma or GED
- Computer Training (preferred)
- Robotic and/or Automation Training (preferred)
- Decoupled molding by R.J.G. (preferred)
Occasionally 1-33%
Frequently 34-66%
Regularly 67 - 100%
Essential Physical Demands
Activity
Frequency
- Standing
- Walking
- Sitting
- Using hands to finger, handle or touch
- Reach above shoulders
- Climb or balance
- Stoop, kneel or crouch
- Talk or hear
- Taste or smell
- Use foot/feet to operate machine
- Up to 15 pounds
- Up to 25 pounds
- Up to 50 pounds
- Up to 75 pounds
- Up to 100 pounds (with assistance)
- More than 100 pounds (with assistance)
Close vision
(clear vision at 20 inches or less)
Distance vision
(clear vision at 20 feet or more)
Color vision
(ability to identify and distinguish colors)
Peripheral vision
(ability to observe an area that can be seen up and down or the left and right while eyes are fixed on a given point)
Depth perception
(three-dimensional vision, ability to judge distances and spatial relationships)
No special vision requirements
Tools/Equipment Used
- Phones, computer, internet, calculator, copier, printers, scanner, fax machine
- Wet, humid conditions (non-weather)
- Work near moving mechanical parts
- Work in high, precarious places
- Fumes or airborne particles
- Toxic or caustic chemicals
- Outdoor weather conditions
- Extreme cold (non-weather)
- Extreme heat (non-weather)
- Risk of electrical shock
- Work with explosives
- Risk of radiation
- Vibration
- Work/job related travel
Very Quiet
Quiet
Moderate Noise
Loud Noise
Very Loud Noise
This class specification should not be interpreted as all-inclusive. It is intended to identify the essential functions and requirements of this job. Individuals may be requested to perform job-related responsibilities and tasks other than those stated in this specification. Any essential function or requirement of this class will be evaluated as necessary should an individual be unable to perform the function or requirement due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the individual when possible.
Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law.
We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to careers@marmon.com, and please be sure to include the title and the location of the position for which you are applying.