What are the responsibilities and job description for the FIXTURE TECHNICIAN position at Patz Corporation?
JOB REQUIREMENTS: Working in accordance with verbal and written
instructions and established procedure, and as assigned by the
supervisor, perform a variety of duties. Essential Job Duties: Must be
able to read and understand blueprints and weld symbols. Working from
prints, sketches, and instructions given, construct a variety of welding
jigs and welding fixtures necessary to produce finished parts per
specifications given using a variety of machine tools and precision
measuring devices. Determine material requirements and requisition
material as required. Maintain, repair, adjust or replace tooling
associated with fixtures. Maintain computer records on all welding jigs
and fixtures including their location and costs and activities. All of
these records must be updated and supplied to the Welding Supervisor on
a regular basis. Jigs and fixtures shall be designed, built, labeled and
guarded to meet OSHA requirements and Patz Corporation, Inc. standards.
Ergonomic factors along with production standards shall be considered in
the design and construction of all jigs and fixtures. Assist welders in
set up as required and when trouble shooting die and jig problems. Pull
welding jigs and fixtures as required for production and inspect before
use and prior to putting away at end of production run for damage and
wear. Check all machine tools for proper operation and report any
malfunctions to the Welding Supervisor. Maintain a clean and orderly
work area. Education/Experience Requirements: Should be able to read and
understand drawings, shop mathematics, handbook formulas, and a variety
of precision measuring instruments. At least one year experience welding
or welding course. Must be able to work from detailed instructions. Must
be able to pass a basic weld test. Physical Demands: In an 8-hour day
the employee must stand/walk 6-8 hours and sit 1-4 hours. Must
frequently use hand(s) for repetitive movement single grasping, and
occasionally pushing, pulling, and fine manipulation. Must occasionally
use foot/feet for repetitive movement as in operating foot controls.
Must frequently bend, twist, and reach, and occasionally squat. Must
perform Light Heavy Work, lifting 75 pounds maximum with frequent
lifting and carrying of objects weighing up to 40 pounds. Typical
Working Conditions: Located in a factory setting with a large amount of
noise and distractions. Personal Protective Equipment (PPE) required at
all times for this job description: Safety glasses with side shields.
Steel toe shoes. Hearing protection. Long work pants. Personal
Protective Equipment (PPE) required for occasional activities for this
job description: Hard hat (where overhead hazards exist). Welding helmet
(welding activities). Protective gloves (when welding & material
handling). Shaded lens goggles or glasses (torching operations). Safety
goggles or face shield (abrasive disk grinder use). Safety: Observe all
safety rules and Corporate policies \*\*\*\*\* OTHER EXPERIENCE AND
QUALIFICATIONS: Should be able to read and understand drawings, shop
mathematics, handbook formulas, and a variety of precision measuring
instruments. At least one year experience welding or welding course.
Must be able to work from detailed instructions. Must be able to pass a
basic weld test. \*\*\*\*\* APPLICATION INSTRUCTIONS: Apply In Person:
\*\*\*All applicants must complete a Patz Corporation application to be
considered.\*\*\* For an application visit our website at
http://patzcorp.com/company/careers/, stop by the office, or call us at
(920) 897-9237 for assistance. You may email a company application to
careers@patzcorp.com, fax to (920) 897-3215, mail, or drop off
in-person. Patz Corporation Attn: Human Resources 917 Business 141
Pound, WI 54161 Other: \*\*\*All applicants must complete a Patz
Corporation application to be considered.\*\*\* Please apply online:
https://patzcorp.com/careers/
instructions and established procedure, and as assigned by the
supervisor, perform a variety of duties. Essential Job Duties: Must be
able to read and understand blueprints and weld symbols. Working from
prints, sketches, and instructions given, construct a variety of welding
jigs and welding fixtures necessary to produce finished parts per
specifications given using a variety of machine tools and precision
measuring devices. Determine material requirements and requisition
material as required. Maintain, repair, adjust or replace tooling
associated with fixtures. Maintain computer records on all welding jigs
and fixtures including their location and costs and activities. All of
these records must be updated and supplied to the Welding Supervisor on
a regular basis. Jigs and fixtures shall be designed, built, labeled and
guarded to meet OSHA requirements and Patz Corporation, Inc. standards.
Ergonomic factors along with production standards shall be considered in
the design and construction of all jigs and fixtures. Assist welders in
set up as required and when trouble shooting die and jig problems. Pull
welding jigs and fixtures as required for production and inspect before
use and prior to putting away at end of production run for damage and
wear. Check all machine tools for proper operation and report any
malfunctions to the Welding Supervisor. Maintain a clean and orderly
work area. Education/Experience Requirements: Should be able to read and
understand drawings, shop mathematics, handbook formulas, and a variety
of precision measuring instruments. At least one year experience welding
or welding course. Must be able to work from detailed instructions. Must
be able to pass a basic weld test. Physical Demands: In an 8-hour day
the employee must stand/walk 6-8 hours and sit 1-4 hours. Must
frequently use hand(s) for repetitive movement single grasping, and
occasionally pushing, pulling, and fine manipulation. Must occasionally
use foot/feet for repetitive movement as in operating foot controls.
Must frequently bend, twist, and reach, and occasionally squat. Must
perform Light Heavy Work, lifting 75 pounds maximum with frequent
lifting and carrying of objects weighing up to 40 pounds. Typical
Working Conditions: Located in a factory setting with a large amount of
noise and distractions. Personal Protective Equipment (PPE) required at
all times for this job description: Safety glasses with side shields.
Steel toe shoes. Hearing protection. Long work pants. Personal
Protective Equipment (PPE) required for occasional activities for this
job description: Hard hat (where overhead hazards exist). Welding helmet
(welding activities). Protective gloves (when welding & material
handling). Shaded lens goggles or glasses (torching operations). Safety
goggles or face shield (abrasive disk grinder use). Safety: Observe all
safety rules and Corporate policies \*\*\*\*\* OTHER EXPERIENCE AND
QUALIFICATIONS: Should be able to read and understand drawings, shop
mathematics, handbook formulas, and a variety of precision measuring
instruments. At least one year experience welding or welding course.
Must be able to work from detailed instructions. Must be able to pass a
basic weld test. \*\*\*\*\* APPLICATION INSTRUCTIONS: Apply In Person:
\*\*\*All applicants must complete a Patz Corporation application to be
considered.\*\*\* For an application visit our website at
http://patzcorp.com/company/careers/, stop by the office, or call us at
(920) 897-9237 for assistance. You may email a company application to
careers@patzcorp.com, fax to (920) 897-3215, mail, or drop off
in-person. Patz Corporation Attn: Human Resources 917 Business 141
Pound, WI 54161 Other: \*\*\*All applicants must complete a Patz
Corporation application to be considered.\*\*\* Please apply online:
https://patzcorp.com/careers/