What are the responsibilities and job description for the Journeyman Electrician- Bornite Mine, AK- Rotational position at NANA Construction, LLC?
Job Description
Plans layout, installs, and repairs wiring, electrical fixtures, apparatus, and control equipment by performing the following duties.
Responsibilities
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly exposed to outdoor weather conditions. The employee is frequently exposed to wet or humid conditions; work near moving mechanical parts; work in high, precarious places; extreme cold; extreme heat and risk of electrical shock. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals; risk of radiation and vibration. The noise level in the work environment is usually moderate.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The employee must occasionally lift up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit and taste or smell. Steel toed boots required on the job.
Travel may require an employee or contractor to pass a TSA security checkpoint. If the employee or contractor does not have valid identification, they will not be able to travel until valid identification is obtained and verified. For this reason all employees and contractors must have valid identification when traveling to and from the site, for a list of TSA approved valid identification visit https://www.tsa.gov/travel/security-screening/identification .
Competencies
To perform the job successfully, an individual should demonstrate the following competencies:
Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions; demonstrates group presentation skills; participates in meetings.
Written Communication - Able to read and interpret written information.
Planning/Organizing - Prioritize and plans work activities; uses time efficiently.
Quality - Demonstrates accuracy and thoroughness.
Quantity - Meets productivity standards; completes work in timely manner; Strives to increase productivity.
Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly.
Adaptability - Adapts to changes in the work environment.
Plans layout, installs, and repairs wiring, electrical fixtures, apparatus, and control equipment by performing the following duties.
Responsibilities
- Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes.
- Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring.
- Measures, cuts, bends, threads, assembles, and installs electrical conduit.
- Pulls wiring through conduit.
- Splices wires by stripping insulation from terminal leads, twisting or soldering wires together, and applying tape or terminal caps.
- Connects wiring to lighting fixtures and power equipment.
- Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels.
- Connects power cables to equipment, such as electric range or motor, and installs grounding leads.
- Tests continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as ohmmeter, battery and buzzer, and oscilloscope.
- Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement.
- Repairs faulty equipment or systems.
- Cuts and welds steel structural members.
- Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.
- This position has no supervisory responsibilities.
- Other duties that are pertinent to the department or unit’s success also may be assigned.
- High School Diploma or GED equivalent or ten (10) years Journeyman electrician experience will be considered.
- Minimum five (5) years related experience.
- Alaska Journeyman's Fitness Card or appropriate reciprocal fitness card from another state.
- Medium Voltage experience required.
- Knowledge of power delivery systems.
- Driver’s License and an acceptable driving record for the past three (3) years to be eligible under company vehicle insurance policy preferred.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly exposed to outdoor weather conditions. The employee is frequently exposed to wet or humid conditions; work near moving mechanical parts; work in high, precarious places; extreme cold; extreme heat and risk of electrical shock. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals; risk of radiation and vibration. The noise level in the work environment is usually moderate.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The employee must occasionally lift up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit and taste or smell. Steel toed boots required on the job.
Travel may require an employee or contractor to pass a TSA security checkpoint. If the employee or contractor does not have valid identification, they will not be able to travel until valid identification is obtained and verified. For this reason all employees and contractors must have valid identification when traveling to and from the site, for a list of TSA approved valid identification visit https://www.tsa.gov/travel/security-screening/identification .
Competencies
To perform the job successfully, an individual should demonstrate the following competencies:
Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions; demonstrates group presentation skills; participates in meetings.
Written Communication - Able to read and interpret written information.
Planning/Organizing - Prioritize and plans work activities; uses time efficiently.
Quality - Demonstrates accuracy and thoroughness.
Quantity - Meets productivity standards; completes work in timely manner; Strives to increase productivity.
Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly.
Adaptability - Adapts to changes in the work environment.