What are the responsibilities and job description for the Laser Operator position at Exyte?
Description
Discover your exciting role
A mid-level position in a production environment with some experience required. In this area, you’ll be required to: operate/set-up the laser, perform some inventory control duties, paperwork verification, label parts, coiling/shearing raw material, 5S and safety.
Explore Your Tasks And Responsibilities
Under close supervision you’ll be introduced to a series of duties and responsibilities with increasing complexity to include, but not limited to the following:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
Frequent standing, sitting, talking, hearing and use of hands in this support role is required
Specific vision abilities required to include close vision, and ability to adjust focus
Occasionally perform physical activities including lifting (up to 50 lbs. unassisted)
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The noise level in the production area is usually moderately loud. The Laser department is a sectioned off area of the production floor.
Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws
Contact
You want to be part of the Exyte team? We look forward to receiving your application!
For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at clinton.crellin@exyte.net.
Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.
Discover your exciting role
A mid-level position in a production environment with some experience required. In this area, you’ll be required to: operate/set-up the laser, perform some inventory control duties, paperwork verification, label parts, coiling/shearing raw material, 5S and safety.
Explore Your Tasks And Responsibilities
Under close supervision you’ll be introduced to a series of duties and responsibilities with increasing complexity to include, but not limited to the following:
- Machine operation from set-up to shut down
- Weekly clean-up duties and daily tool board checklists
- Maintaining accuracy of parts and tooling maintenance
- Inventory control, perform cycle counting of steel (sheet, coil and structural)
- Scrap utilization and disposal
- Troubleshooting equipment
- Identify opportunities for process improvement
- General housekeeping
- Pre and post verification of all parts
- Create a coil list after pre-verification
- Legible marking of all parts
- Learn all aspects of the Cut to length line “CTL” and shear
- Comply with established production philosophies designed to increase production, safety and/or quality; e.g., Lean Manufacturing, 5s and TWI methodologies
- Perform various other assignments per lead person or supervisor direction
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
- Strong mechanical ability
- Knowledge of sheet metal layout (proper fittings), surface grinding and metallurgy.
- Forklift certification (license)
- Demonstrate a commitment to quality and safety
- Willingness to learn the more complex aspects of the Laser operation
- Willingness to work in other areas as needed
- Ability to thrive in a fast-paced environment with shifting priorities
- Comply with health, safety, (including OSHA), and environmental procedures, and ensure the cleanliness of the area.
- Three or more years related experience and/or training; or equivalent combination of education and experience.
- Ability to read, analyze, and interpret written technical procedures and cut sheets as well as follow verbal instruction
- Ability to apply basic mathematical skills to include decimals, fractions, and conversions
- Measurement skills to include tape measure, sheet metal gauge, and dial calipers
- Ability to identify problems, collect information, establish facts, and suggest solutions
Frequent standing, sitting, talking, hearing and use of hands in this support role is required
Specific vision abilities required to include close vision, and ability to adjust focus
Occasionally perform physical activities including lifting (up to 50 lbs. unassisted)
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The noise level in the production area is usually moderately loud. The Laser department is a sectioned off area of the production floor.
- Safety glasses and hearing protection are required when in the production area
- PPE specific to tasks being performed is required
Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws
Contact
You want to be part of the Exyte team? We look forward to receiving your application!
For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at clinton.crellin@exyte.net.
Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.