What are the responsibilities and job description for the Industrial Electrician II position at Borusan Pipe US?
Job Details
Description
Description:
This position requires the advanced skills to inspect, install, repair, adjust, construct, modify, calibrate, program and wire all electrical and electronic apparatus, devices, and circuits of any voltages in the plant or assigned area. Also requires the ability to assist in the design and service of all types electrical, electronic, pneumatic, electro-mechanical, radio controlled equipment and any type of integrating, indicating or graphic electrical, electronic or mechanical instruments and control equipment. Help ensure that all equipment performs at par with safety and OEM specifications.
Working Conditions
Working conditions are normal for a manufacturing environment; hot when weather is hot and cold when weather is cold. Greasy, dirty and noisy environment. Work involves lifting, pulling and/or pushing of materials and product up to 50 pounds. Standing and walking considerable distances. Operation requires the use of personal protective equipment (PPE) to include but not limited to; eye safety glasses, hearing protection, work boots, and hardhats. Loose fitting clothes and jewelry are not permitted.
1.2. An electrical certification or technical degree with at least three years of experience in Industrial electrical maintenance & repair required.
1.3. Ability to read documents such as operating and maintenance instructions, procedure/equipment manuals as well as electrical schematic drawings. Ability to write routine reports and correspondence and to communicate effectively with co-workers.
1.4. Manual dexterity required for operating machinery.
1.5. This job requires the ability to run conduit, cable tray, wiring and perform terminations.
1.6. Above average knowledge of general manufacturing processes, procedures, and machinery.
1.7. To perform this job successfully, an individual should be familiar with Microsoft Office programs and preferably some exposure to PLC Development software; Electrical Design software; Internet software; Order processing systems and Project Management software.
1.8. Individual must have extensive knowledge and hands-on experience with PLC’s, VFD’s and communication systems. He/she must understand ladder logic and possess advanced troubleshooting skills with equipment software language. Previous experience with Allen-Bradley and Siemens equipment is preferred.
1.9. Employee must be able to work with a flexible or rotating schedule which may require over-time when needed.
1.10. Read, write and speak English in a clear and effective manner.
1.11. Spanish as a second language would be beneficial but not required.
2.2. Responsible for the electrical maintenance of machinery and equipment within the facility.
2.3. Analytically troubleshoot and resolve electrical malfunctions back to OEM Specifications.
Department Maintenance Revision No. 1
Reports to Department Supervisor Revision Date 9/30/2019
2.4. Routinely check the performance of electrical equipment. and perform assigned PM’s.
2.5. The employee is responsible for maintaining maintenance records, inspection reports, and processing Work Orders.
2.6. Employee must follow all PPE policies and safety rules.
2.7. Operate within standard operating procedures (SOPs) and Job Safety Analysis (JSAs).
3.2. Make necessary equipment repairs during the shift to maintain equipment availability for production.
3.3. Complete Maintenance shift reports and corresponding paper work.
3.4. Participate in production startups, shutdowns, and changeovers as it pertains to equipment reliability and availability.
3.5. Perform required Daily; Weekly, Quarterly and Annual check sheets as established by the Maintenance Department and OEM suppliers.
3.6. Prepares reports, forms, records and related paperwork for assigned area.
3.7. This position may require operating a Forklift, Overhead Crane, Manlift and/or Carry Deck.
3.8. Maintain good housekeeping practices in the work area and keep it free and clear of debris.
3.9. Other duties as assigned.
Description
Description:
This position requires the advanced skills to inspect, install, repair, adjust, construct, modify, calibrate, program and wire all electrical and electronic apparatus, devices, and circuits of any voltages in the plant or assigned area. Also requires the ability to assist in the design and service of all types electrical, electronic, pneumatic, electro-mechanical, radio controlled equipment and any type of integrating, indicating or graphic electrical, electronic or mechanical instruments and control equipment. Help ensure that all equipment performs at par with safety and OEM specifications.
Working Conditions
Working conditions are normal for a manufacturing environment; hot when weather is hot and cold when weather is cold. Greasy, dirty and noisy environment. Work involves lifting, pulling and/or pushing of materials and product up to 50 pounds. Standing and walking considerable distances. Operation requires the use of personal protective equipment (PPE) to include but not limited to; eye safety glasses, hearing protection, work boots, and hardhats. Loose fitting clothes and jewelry are not permitted.
- Qualifications:
1.2. An electrical certification or technical degree with at least three years of experience in Industrial electrical maintenance & repair required.
1.3. Ability to read documents such as operating and maintenance instructions, procedure/equipment manuals as well as electrical schematic drawings. Ability to write routine reports and correspondence and to communicate effectively with co-workers.
1.4. Manual dexterity required for operating machinery.
1.5. This job requires the ability to run conduit, cable tray, wiring and perform terminations.
1.6. Above average knowledge of general manufacturing processes, procedures, and machinery.
1.7. To perform this job successfully, an individual should be familiar with Microsoft Office programs and preferably some exposure to PLC Development software; Electrical Design software; Internet software; Order processing systems and Project Management software.
1.8. Individual must have extensive knowledge and hands-on experience with PLC’s, VFD’s and communication systems. He/she must understand ladder logic and possess advanced troubleshooting skills with equipment software language. Previous experience with Allen-Bradley and Siemens equipment is preferred.
1.9. Employee must be able to work with a flexible or rotating schedule which may require over-time when needed.
1.10. Read, write and speak English in a clear and effective manner.
1.11. Spanish as a second language would be beneficial but not required.
- Responsibilities:
2.2. Responsible for the electrical maintenance of machinery and equipment within the facility.
2.3. Analytically troubleshoot and resolve electrical malfunctions back to OEM Specifications.
Department Maintenance Revision No. 1
Reports to Department Supervisor Revision Date 9/30/2019
2.4. Routinely check the performance of electrical equipment. and perform assigned PM’s.
2.5. The employee is responsible for maintaining maintenance records, inspection reports, and processing Work Orders.
2.6. Employee must follow all PPE policies and safety rules.
2.7. Operate within standard operating procedures (SOPs) and Job Safety Analysis (JSAs).
- Activities:
3.2. Make necessary equipment repairs during the shift to maintain equipment availability for production.
3.3. Complete Maintenance shift reports and corresponding paper work.
3.4. Participate in production startups, shutdowns, and changeovers as it pertains to equipment reliability and availability.
3.5. Perform required Daily; Weekly, Quarterly and Annual check sheets as established by the Maintenance Department and OEM suppliers.
3.6. Prepares reports, forms, records and related paperwork for assigned area.
3.7. This position may require operating a Forklift, Overhead Crane, Manlift and/or Carry Deck.
3.8. Maintain good housekeeping practices in the work area and keep it free and clear of debris.
3.9. Other duties as assigned.
- Authority and Obligation: