What are the responsibilities and job description for the Production CNC Machinist II position at ATC?
Shift schedule: Mondays thru Thursdays 3:30 PM to 2:00 AM; Fri and Sat as needed for OT
Summary
Sets up and operates conventional, special purpose, and computer numerical control (CNC) machines and machining centers to fabricate metallic and nonmetallic parts by performing the following duties.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements.
Measures, marks, and scribes dimensions and reference points on material or workpiece as guides for subsequent machining.
Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers.
Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
Verifies conformance of finished workpiece to specifications.
Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data.
Fits and assembles parts into complete assembly.
Verifies dimensions and alignment of assembly.
Installs machined replacement parts in mechanisms, machines, and equipment, and tests operation of unit to ensure functionality and performance.
Develops specifications from general description and draws sketch of part or product to be fabricated.
Confers with engineers, production personnel, programmers, or others to resolve machining or assembly problems.
Recommends measures to improve production methods, equipment performance and quality of product.
Clean and perform operator maintenance on assigned equipment.
Responsible for adherence to the policies, procedures and instructions of the ISO 14001 systems.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION And/or EXPERIENCE
Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience.
Language Skills
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
Mathematical Skills
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms. The employee will frequently perform tasks requiring forceful repetitive grasping. The employee is occasionally required to walk; bend; stoop, kneel, crouch, or crawl; and talk or hear. The employee must regularly lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and ability to adjust focus.
WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate.
ATC Drivetrain provides equal employment opportunities (EEO)
Summary
Sets up and operates conventional, special purpose, and computer numerical control (CNC) machines and machining centers to fabricate metallic and nonmetallic parts by performing the following duties.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements.
Measures, marks, and scribes dimensions and reference points on material or workpiece as guides for subsequent machining.
Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers.
Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
Verifies conformance of finished workpiece to specifications.
Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data.
Fits and assembles parts into complete assembly.
Verifies dimensions and alignment of assembly.
Installs machined replacement parts in mechanisms, machines, and equipment, and tests operation of unit to ensure functionality and performance.
Develops specifications from general description and draws sketch of part or product to be fabricated.
Confers with engineers, production personnel, programmers, or others to resolve machining or assembly problems.
Recommends measures to improve production methods, equipment performance and quality of product.
Clean and perform operator maintenance on assigned equipment.
Responsible for adherence to the policies, procedures and instructions of the ISO 14001 systems.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION And/or EXPERIENCE
Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience.
Language Skills
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
Mathematical Skills
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms. The employee will frequently perform tasks requiring forceful repetitive grasping. The employee is occasionally required to walk; bend; stoop, kneel, crouch, or crawl; and talk or hear. The employee must regularly lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and ability to adjust focus.
WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate.
ATC Drivetrain provides equal employment opportunities (EEO)