What are the responsibilities and job description for the Medical Supply Tech (Sterile Processing) position at Veterans Health Administration?
The Medical Supply Technician position is located in the Sterile Processing Service department of the Salisbury VA. MSTs will perform duties in all areas of the SPS department to accomplish daily workload and to rotate routinely through all assignments.
Assignment: This is an entry level MST position. MSTs receive guidance from more experienced staff members and require frequent and direct supervision.
GS-04 (Developmental Level) Experience. Six months experience as a MST, operating room or surgical technician or other position that demonstrated knowledge of sterile processing in a clinical setting;
OR
Education. Two years of education above high school that included at least 12 semester hours in courses related to the occupation.NOTE: Successful completion of a course for medical technicians, hospital corpsmen, medical service specialists, or nursing assistants obtained in a training program given by the Armed Forces, the U.S. Maritime Service, or hospitals under close medical and professional supervision, may be substituted on a month-for-month basis for up to 6 months of experience.
AND
In addition to the experience or education above, the candidate must demonstrate the following KSAs below (KSAs must be demonstrated in resume)
1. Knowledge of universal precautions for safety and prevention of cross contamination.
2. Basic knowledge of medical terminology in order to assemble specialty operating room/clinic instrument sets.
3. Basic knowledge of sterilization and cleaning equipment.
4. Ability to communicate both orally and in writing
Assignment: This is a developmental level MST position. Removes soil, blood, tissue fragments, body fluids, and other containments by wiping, soaking, rinsing, and scrubbing. Inspects packages for indications of proper sterilization, assembles basic sets and trays used throughout the medical center including those used in the operating room. Prepares, loads, and operates sterilizers such as steam, Sterrad, Steris, ETO, and a high level disinfecting scope reprocessor; prepares operating room case carts daily using surgery schedule. MSTs receive guidance from more experienced staff members for more complex tasks and require direct supervision on new assignments.
GS-05 (Developmental Level) Experience. One year of experience equivalent to the next lower grade level;
OR
Education. Four academic years above high school leading to a Bachelor's degree with at least 12 semester hours in courses related to the occupation or a Bachelor's degree
AND
In addition to the experience or education above, the candidate must demonstrate the following KSAs below (KSAs must be demonstrated in resume):
1. Basic knowledge of surgical instruments used in operating rooms and clinic settings.
2. Basic knowledge of event-related packaging in regards to sterility.
3. Knowledge of sterilization and cleaning equipment.GS-06 (Full Performance Level Experience. One year of experience equivalent to the next lower grade level. (there is no education substitution at the GS-6 level)In addition to the experience or education above, the candidate must demonstrate the following KSAs below (KSAs must be demonstrated in resume)
1. Knowledge of surgical instruments used in operating rooms and clinic settings.
2. Knowledge of universal precautions for safety and prevention of cross contamination.
3. Working knowledge of medical terminology, anatomy and physiology, microbiology, medical conditions and procedures.
4. Knowledge of sterility principles in regards to instrumentation.5. Ability to read and interpret written instructions and procedures.
Assignment: This is the full performance level for the occupation. Receives contaminated critical and semi-critical RME in the decontamination area and may receive noncritical equipment in the decontamination area as well. Disassembles the RME and determines the correct cleaning method, such as but not limited to ultrasonic cleaners, mechanical washers, cart washers and chemical cleaning/decontamination agents, as determined by manufacturer instructions. Inspects, assembles and determines the correct method and packaging for sterilization such as but not limited to steam, Sterrad, Steris, ETO, and high level disinfecting scope reprocessors. Performs and documents daily operational checks and records for all sterilization equipment.
References: VA Handbook 5005/83, Part II, Appendix G47, Medical Supply Technician (Sterile Processing) Qualification Standard http://vaww.va.gov/OHRM/Directives-Handbooks/Documents/5005
The full performance level of this vacancy is GS-6.
The actual grade at which an applicant may be selected for this vacancy is in the range of GS-3 to GS-6.
Preferred Experience: Sterile processing tech, or scrub tech experience
Physical Requirements: Work is performed in a health care setting, with exposure to: inside and outside work, excessive noise, intermittent and constant, working around machinery with moving parts, working around moving objects or vehicles, working with hands in water, working closely with others, working alone, and working protracted or irregular hours. Routinely requires moderate lifting (15-44 lbs.), moderate carrying (15-44 lbs.), straight pulling and pushing (up to 8 hrs.), walking (8 hrs.), standing (8 hrs.), kneeling (8 hrs.), repeated bending (8 hrs.), both legs required, both eyes required, ability to distinguish colors, ability to distinguish shades of colors, hearing aid permitted, and mental and emotional stability.
Qualifications:
United States Citizenship: Non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy.- Experience. Six months of experience that demonstrates the applicant's ability to perform the work or provides an understanding of the work; or
- Education. One year above high school that included at least 6 semester hours in health care related courses such as sterile processing, nursing assistant, hospital corpsman, and operating room and surgical technician courses or other courses related to the position; or
- Experience/Education Combination. Equivalent combination of experience and education are qualifying for entry level for which both education and experience are acceptable.
- Certification. None
- Preferred Experience: Certified Medical Supply Technicians or Instrumentation Technicians
Assignment: This is an entry level MST position. MSTs receive guidance from more experienced staff members and require frequent and direct supervision.
GS-04 (Developmental Level) Experience. Six months experience as a MST, operating room or surgical technician or other position that demonstrated knowledge of sterile processing in a clinical setting;
OR
Education. Two years of education above high school that included at least 12 semester hours in courses related to the occupation.NOTE: Successful completion of a course for medical technicians, hospital corpsmen, medical service specialists, or nursing assistants obtained in a training program given by the Armed Forces, the U.S. Maritime Service, or hospitals under close medical and professional supervision, may be substituted on a month-for-month basis for up to 6 months of experience.
AND
In addition to the experience or education above, the candidate must demonstrate the following KSAs below (KSAs must be demonstrated in resume)
1. Knowledge of universal precautions for safety and prevention of cross contamination.
2. Basic knowledge of medical terminology in order to assemble specialty operating room/clinic instrument sets.
3. Basic knowledge of sterilization and cleaning equipment.
4. Ability to communicate both orally and in writing
Assignment: This is a developmental level MST position. Removes soil, blood, tissue fragments, body fluids, and other containments by wiping, soaking, rinsing, and scrubbing. Inspects packages for indications of proper sterilization, assembles basic sets and trays used throughout the medical center including those used in the operating room. Prepares, loads, and operates sterilizers such as steam, Sterrad, Steris, ETO, and a high level disinfecting scope reprocessor; prepares operating room case carts daily using surgery schedule. MSTs receive guidance from more experienced staff members for more complex tasks and require direct supervision on new assignments.
GS-05 (Developmental Level) Experience. One year of experience equivalent to the next lower grade level;
OR
Education. Four academic years above high school leading to a Bachelor's degree with at least 12 semester hours in courses related to the occupation or a Bachelor's degree
AND
In addition to the experience or education above, the candidate must demonstrate the following KSAs below (KSAs must be demonstrated in resume):
1. Basic knowledge of surgical instruments used in operating rooms and clinic settings.
2. Basic knowledge of event-related packaging in regards to sterility.
3. Knowledge of sterilization and cleaning equipment.GS-06 (Full Performance Level Experience. One year of experience equivalent to the next lower grade level. (there is no education substitution at the GS-6 level)In addition to the experience or education above, the candidate must demonstrate the following KSAs below (KSAs must be demonstrated in resume)
1. Knowledge of surgical instruments used in operating rooms and clinic settings.
2. Knowledge of universal precautions for safety and prevention of cross contamination.
3. Working knowledge of medical terminology, anatomy and physiology, microbiology, medical conditions and procedures.
4. Knowledge of sterility principles in regards to instrumentation.5. Ability to read and interpret written instructions and procedures.
Assignment: This is the full performance level for the occupation. Receives contaminated critical and semi-critical RME in the decontamination area and may receive noncritical equipment in the decontamination area as well. Disassembles the RME and determines the correct cleaning method, such as but not limited to ultrasonic cleaners, mechanical washers, cart washers and chemical cleaning/decontamination agents, as determined by manufacturer instructions. Inspects, assembles and determines the correct method and packaging for sterilization such as but not limited to steam, Sterrad, Steris, ETO, and high level disinfecting scope reprocessors. Performs and documents daily operational checks and records for all sterilization equipment.
References: VA Handbook 5005/83, Part II, Appendix G47, Medical Supply Technician (Sterile Processing) Qualification Standard http://vaww.va.gov/OHRM/Directives-Handbooks/Documents/5005
The full performance level of this vacancy is GS-6.
The actual grade at which an applicant may be selected for this vacancy is in the range of GS-3 to GS-6.
Preferred Experience: Sterile processing tech, or scrub tech experience
Physical Requirements: Work is performed in a health care setting, with exposure to: inside and outside work, excessive noise, intermittent and constant, working around machinery with moving parts, working around moving objects or vehicles, working with hands in water, working closely with others, working alone, and working protracted or irregular hours. Routinely requires moderate lifting (15-44 lbs.), moderate carrying (15-44 lbs.), straight pulling and pushing (up to 8 hrs.), walking (8 hrs.), standing (8 hrs.), kneeling (8 hrs.), repeated bending (8 hrs.), both legs required, both eyes required, ability to distinguish colors, ability to distinguish shades of colors, hearing aid permitted, and mental and emotional stability.
Supply Solutions Specialist
Natus Medical Incorporated -
Charlotte, NC
Tech - CT Tech
Magnet Medical -
Charlotte, NC
Medical Supply Technician (Sterile Processing)
US Veterans Health Administration -
Charlotte, NC
