What are the responsibilities and job description for the Electronics Technician, Maintenance I position at V2X Inc?
ELECTRONICS TECHNICIAN I WTRS- Fort Knox, Kentucky
This is an SCA role
Job Summary
Electronics Technician I will follow the guidance of the Electronics Technician III that he is assigned to support ensuring the full spectrum of range support is provided to enable successful gunnery/range training events. The Electronics Technician I applies basic technical knowledge to perform simple or routine tasks following detailed
instructions, performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes. This person works under close supervision receiving
technical guidance / direction from Electronics Technician III or higher-level technician based on Site Managers Taskings. Work is checked frequently for accuracy.
Required Hours
Standard work week will be five (5) days per week for up to eight (8) hours per day while at work site(s), for a standard 40-hour work week.
Additional hours and varying shifts may be required to support scheduled gunnery events.
Requirements
Must be able to use hands to finger, handle, and feel.
Must be able to read, write, speak, hear and understand English.
Frequently required to reach with hands and arms.
Work is subject to high noise levels and vibration.
Work is performed in an environment with high dust, pollen, and wind.
Requires physical presence around high voltage, machinery, and unprotected heights.
Work may require protective clothing and equipment for feet, hands, head, eyes, and ears.
Ability to lift and carry items not to exceed 50 lbs.
Physical dexterity to push/pull, climb/balance, bend/stoop, twist/turn, kneel/crouch, crawl, reach overhead, grasp,
use feet for foot controls.
Ability to stand unaided for eight (8) hours or more.
Must have a Valid State Driver’s License and retain Post Driving Privileges.
Must be able to acquire a Government Common Access Card (CAC).
Can Travel up to 50%.
Knowledge of range operations
Detail-oriented with the ability to work under deadlines while adhering to all applicable safety guidelines and
installation Standardized Operating Procedures
Experience working with military units.
Excellent written and oral communication skills.
Knowledge of Microsoft Office (i.e. Word, Excel, and PowerPoint).
Collaborative work style, fostering cooperation and teamwork.
Ability to exercise good judgment and insight, to understand the overall effect of decisions.
Ability to prioritize responsibilities to handle a demanding workload.
Detail-oriented with a high degree of accuracy.
Ability to work effectively with employees and management of all levels.
Clearance Requirement
Must be able to obtain and maintain a U.S. Secret Clearance.
V2X is committed to building a diverse and inclusive environment in which we recognize and value each other’s differences as well as fostering a culture that promotes its core values: Professionalism, Integrity, and Respect. As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran.
This is an SCA role
Job Summary
Electronics Technician I will follow the guidance of the Electronics Technician III that he is assigned to support ensuring the full spectrum of range support is provided to enable successful gunnery/range training events. The Electronics Technician I applies basic technical knowledge to perform simple or routine tasks following detailed
instructions, performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes. This person works under close supervision receiving
technical guidance / direction from Electronics Technician III or higher-level technician based on Site Managers Taskings. Work is checked frequently for accuracy.
Required Hours
Standard work week will be five (5) days per week for up to eight (8) hours per day while at work site(s), for a standard 40-hour work week.
Additional hours and varying shifts may be required to support scheduled gunnery events.
Requirements
- Requires the ability to work effectively with employees and management of all levels. Performs other duties as required.
- Maintenance on Equipment
- Administration
- Inventory counts and reconciliation
- MIS data entry
- PMCS
- Corrective W/O’s
- Facility cleanup of ROCA
- Sweeping, mopping, empty trash
- Ground maintenance
- Line of sight maintenance
- Weed mowing & trimming at all SITS, SATS, MITS, MATS, Hull Downs, Battle Positions and facilities Weed trimming / pulling Vehicles
- Cleaning exterior, interior, and windows, uploading work stock, downloading work stock and target repair waste
- Performs user level PMCS and repairs
- IPU approximately equivalent to Crew level maintenance.
- Monthly and annual PMCS
- Installation, removal, battery checks and replacement
- User level diagnostics, cleaning, repair, cable repair, packing, and unpacking TADSS
- Daily, monthly, and annual PMCS
- Installation, removal, battery checks and replacement
- Diagnostics, LRU replacement, cleaning, repair, cable repair
- Target Fabrication, assembly, repair, painting, installing thermal blankets and installing lifters.
- Operate System Control (SYSCON), Exercise Control (EXCON), Scenario Development Tool (SDT), Area Weapons Scoring System (AWSS) Workstation, and Theater Podium
- Conducts Range Tests, target thermal checks, maintenance and repairs for day to night or night to day transition
Must be able to use hands to finger, handle, and feel.
Must be able to read, write, speak, hear and understand English.
Frequently required to reach with hands and arms.
Work is subject to high noise levels and vibration.
Work is performed in an environment with high dust, pollen, and wind.
Requires physical presence around high voltage, machinery, and unprotected heights.
Work may require protective clothing and equipment for feet, hands, head, eyes, and ears.
Ability to lift and carry items not to exceed 50 lbs.
Physical dexterity to push/pull, climb/balance, bend/stoop, twist/turn, kneel/crouch, crawl, reach overhead, grasp,
use feet for foot controls.
Ability to stand unaided for eight (8) hours or more.
Must have a Valid State Driver’s License and retain Post Driving Privileges.
Must be able to acquire a Government Common Access Card (CAC).
Can Travel up to 50%.
Knowledge of range operations
Detail-oriented with the ability to work under deadlines while adhering to all applicable safety guidelines and
installation Standardized Operating Procedures
Experience working with military units.
Excellent written and oral communication skills.
Knowledge of Microsoft Office (i.e. Word, Excel, and PowerPoint).
Collaborative work style, fostering cooperation and teamwork.
Ability to exercise good judgment and insight, to understand the overall effect of decisions.
Ability to prioritize responsibilities to handle a demanding workload.
Detail-oriented with a high degree of accuracy.
Ability to work effectively with employees and management of all levels.
Clearance Requirement
Must be able to obtain and maintain a U.S. Secret Clearance.
V2X is committed to building a diverse and inclusive environment in which we recognize and value each other’s differences as well as fostering a culture that promotes its core values: Professionalism, Integrity, and Respect. As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran.