Aerospace Source Inspector- Mechanical

The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations.Job Functions:Experienced quality individual in dimensional and visual inspection of aerospace machined componentsExperience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them)Experience with hand measurement toolsKnowledge of CMM Inspection process (Knowledge of CMM Programming is not required)Knowledge and experience in GD&T (ASME Y14.5)Knowledge and experience with blueprint interpretationPerform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection)Other duties as assignedKNOWLEDGE, SKILLS AND ABILITIESExperienced quality individual in dimensional inspection of aerospace machined componentsExperience in performing FAI’s – AS9102Experience with hand measurement toolsKnowledge of CMM Inspection process (Knowledge of CMM Programming is not required)Knowledge and experience in GD&T (ASME Y14.5)Knowledge and experience with blueprint interpretationPerform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection)MS Outlook, and EXCEL experienceMechanical inspection experince preferredIPC, J-STD, and Mil-Spec inspection experience preferred. Such as IPC-610 or IPC 620Skills:Strong verbal, written and communication skillsFluent English – reading and writing is requiredProfessionalism, integrity, and exceptional attention to detailStrong independent decision-making skills; excellent analytical skills and professional judgmentExcellent interpersonal, written, and verbal communication skillsKnowledge of basic computer skills, include basic Excel skills - must pass Excel testAbility to:Work as an effective team memberEstablish and maintain effective working relationshipsFluent English – reading and writing is requiredPass pre-hire background check including DMV and credit screeningPass Pre-hire Drug Screening Supervision Received:The work is performed under general supervisionU.S. Citizenship required Preferred Education and Skills (including certifications):3 years’ experience as a quality inspector, technician, or engineer.3 years’ experience in an aerospace manufacturing facility3 years’ experience in inspection duties, FAI’s GD&T, and b/p interpretationProficient with Microsoft Outlook and ExcelEffective communication skillsDetail orientedAny combination of education and experience may be consideredPrior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem-solving a plusWORKING CONDITIONSProductivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction.Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time.Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others.Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers.Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime.The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high.BENEFITS:12 days paid vacation first year, increasing with service years10 days paid sick time11 paid holidaysHealthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependentsChamp Plan Wellness and HealthFree to employees working minimum 20 hours/week with anticipated $30k/annual earningsParticipation increases net take home pay $$$ in most instancesFree wellness initiativesFree tele-healthFree and discounted RXAuto enrollment (unless tax elections result in negative impact)Eligible on the 1st of the month following 30 days of continuous employmentrequires monthly 10-minute wellness activity participation401k retirement savings with matchEligible on the first (1st) of the month following 90 days of continuous employment100% match of 1st 3% contribution50% match of next 2% contributionIMMEDIATE VESTINGCompany-provided cell phone, laptop, mobile wi-fi (for business use only)Regular Hourly rate for travel timeDirect Pay Travel arrangements for flights, hotels and rental carsTravel Reimbursements direct deposited with each payrollFederal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company businessPer diem reimbursements for meals and incidentalsOvernight trips - Up to $75Leaving home after 4 pm $40Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company businessDirect Pay Travel arrangements for flights, hotels and rental carsTravel Reimbursements direct deposited with each payrollPer diem reimbursements for meals and incidentalsOvernight trips - Up to $75Leaving home after 4 pm $40$1500 EMPLOYEE REFERRAL BONUSInitial $750 paid upon hire of qualified referred employee (rehires excluded)Additional $750 paid upon referral’s full completion of 90 days’ employmentPay Range: $25 - $40 hourly Please note that the salary information is a general guideline only. Trigo considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.Company OverviewTRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results.TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Salary : $30,000