Measurement/Instrumentation Technician

Job Description

MEASUREMENT TECHNICIAN PRIMARY PURPOSE:

Responsible for the installation, maintenance, and accuracy of natural gas measurement and control facilities. This includes flow computers, chromatographs, contaminant analyzers, regulators, transducers, electronic and pneumatic controllers, relief valves, ultrasonic meters, rotary meters, turbine meters, positive displacement meters, and valves. Performs frequent audits of custody transfer and control data. Required to respond to after-hour “call-outs” due to equipment and/or operational problems and must be willing to work overtime on an as-needed basis.

Responsibilities

• Must be a self-starter and highly motivated.
• Install, maintain & operate, measurement equipment
• Detect measurement errors and correct volumes as needed and provide supporting documentation.
• Monitor assigned area measurement system, and ensure all corrections and proper qualities are applied.
• Assess all facets of assigned facilities to ensure accurate measurement while maintaining the company “Lost and Unaccounted For” gas with a high degree of ownership within the established corporate goals.
• Perform audits of custody transfer and control data when necessary.
• Interpret and apply electrical and electronic schematics about EFM (Electronic Flow Measurement) and measurement electronics.
• Responsible for the general upkeep and maintenance of all facilities and equipment as needed.
• Oversee the construction and/or maintenance activities performed by third parties.
• Complete appropriate documentation and paperwork.
• Perform all work in compliance with Company standards, procedures, and regulatory and tariff requirements.
• Ability to troubleshoot pneumatic, electronic, and electrical equipment and controls.
• Ability to perform basic mechanical work associated with natural gas facilities.
• Participate in federal inspections.
• Ability to actively support the company safety program.
• Identify, report, and correct safety and environmental concerns.
• Maintain a high regard for personal safety, for the safety of company assets and employees, contractors, and the general public.
• Work performance strives for operational excellence focusing on safety, compliance, efficiency, environmental awareness, and superb technical skills.
• Must be able to work in extreme weather conditions and with minimal direct supervision.
• Must be available for and provide an emergency response after regular business hours which may require carrying a personal cell phone.
• Strong analytical and troubleshooting skills.
• Must be proficient in computer software applications including Microsoft Office (Word, Excel, Windows XP, and Windows 7), and be able to manipulate large spreadsheets and databases.
• Deal with a wide variety of people with tact, courtesy, and professionalism.
• Speak, both in person and by telephone, using a high level of verbal skills, and listen carefully.
• Maintain regular, dependable attendance and a consistently high level of performance.
• Will work non-traditional hours as needed.
• Other daily, weekly, monthly or special project duties as identified and defined.
• Other duties as assigned.
  
  

Qualifications

MEASUREMENT TECHNICIAN JOB REQUIREMENTS:

Minimum Requirements

Education:

• Associates degree in a technical field or related discipline.
• Relevant work experience that has developed equivalent technical/measurement-related skills may be considered instead of a degree.
  
  

Experience/Specific Knowledge

• Basic math skills (addition, subtraction, multiplication, division, fractions, decimals).
• Knowledge of electronic test instruments.
• Knowledge of gas chromatography.
• Familiarity with AGA, API, and GPA measurement standards.
• Good record of safe work practices.
• Familiarity with DOT regulations
• Knowledge and experience with safe handling practices of products (gas and liquids).
• Ability to troubleshoot pneumatic, electronic, and electrical equipment and controls.
• Experience with mechanical, pneumatic, and electronic equipment used in gas measurement and control.
• Intermediate proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint, and Outlook.
  
  

Certifications, Licenses & Registrations

• Must be required to achieve and maintain certifications as required to perform job duties and applicable to the job classification.
• Completion of any site-specific technical training may be applicable.
• Must possess and maintain a valid driver’s license and a driving record satisfactory to the company and its insurers (for travel).
  
  

Competencies, Skills & Abilities

• Must respond to, and address, call-outs, and emergencies during and after regular business hours including after dark hours, which require carrying a communication device.
• Depending on location and workload, travel will be required.
• Overtime may be required and is anticipated.
• Good verbal and written communication skills.
• Customer focus.
• Interface directly with customers and provide a high degree of satisfaction and confidence that accurate measurement is taking place.
• Must be able to perform all essential and marginal functions of the job.
• Must be able to work with a team, take direction from management, adhere to required work schedules, focus attention on details, and follow work rules.
• Ability to successfully perform multiple tasks with strict deadlines.
• Ability to organize and prioritize daily work.
• Job level commensurate with experience and skill sets; position will be filled depending on qualifications, experience, and skillsets of the successful candidate.
  
  

Physical Demands

All of the physical requirements listed below are those that may be necessary for an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Capable of lifting objects up to 66 pounds from the floor to waist level.
• Able to lift lightweight items (around 20 pounds) overhead and from waist to overhead.
• Proficient in carrying objects weighing up to 66 pounds over a distance of 5 feet, and lightweight items (approximately 5 pounds) over 300 feet.
• Able to push with a force of up to 49 pounds of force and pull with a force of approximately 27 ft-pounds rotational force.
• Required to perform manual material handling activities such as reaching at overhead, shoulder, waist, knee, and floor levels.
• Must be able to stand, walk, climb stairs and ladders, stoop, crouch, kneel, crawl, and perform lateral flexion and twisting motions.
• Capable of performing fine motor movements, grasping, pinching, and handling vibratory tools.
• Able to perform various spinal motions including bending, twisting, pivoting, and lateral flexion, as well as neck movements like extension, flexion, rotation, and lateral flexion.
  
  

Working Conditions

• Living environs may be negotiable and will be relevant to the work location.
• Required to work outside in all environmental conditions.
• Required to carry a cell phone and be available to respond during working and non working hours.
• The selected candidate must successfully pass a drug screening, background check, and fit-for-duty examination, including credit reports for specific positions—after receiving a job offer and before commencing employment
  
  

Supervisory Responsibility

• None
  
  

& Abilities

PREFERRED EDUCATION, EXPERIENCE, CERTIFICATIONS, COMPETENCIES, SKILLS,

Above the minimum requirements, not required but advantageous in this position:

• Experience with electronic flow measurement computers, gas chromatographs, gas quality analyzers, electronic and pneumatic controllers, regulators, OPP, and transducers.
• Working knowledge of the overall natural gas industry pipelines, compression, and peripheral equipment.
• Working knowledge of AGA, API, and GPA standards.
• Working knowledge of National Electrical Code philosophies and installation requirements.
• Experience with computer interface software, networking, and data file management
  
  

Other Responsibilities

• The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned.
  
  

About Us

Tallgrass was named one of the Top Workplaces USA and highlighted in Colorado's Top Workplaces for the past seven consecutive years. Tallgrass is a leading energy infrastructure company focused on safely, reliably, and sustainably delivering the energy and services that power our nation and enable our quality of life.

At Tallgrass, we value our teams and strive to create an environment where employees feel respected, and their contributions are valued. We aim to support employees' physical, mental, and financial well-being through a comprehensive Total Rewards Program.

• Industry competitive pay
• Health insurance package options that include Flexible Spending & Health Savings Accounts
• Infertility Coverage
• Parental Leave
• 401(k) with up to a 6% match that vests immediately plus an employer discretionary contribution of up to 4%
• Wellness Programs and Mental Health Resources
• Employer-paid life insurance, short-term disability, and long-term disability coverage
• Critical Illness & Accident Insurance
• Vacation, sick days, paid caregiver leave, volunteer and bereavement paid time off
• Identity theft protection
• Annual discretionary bonus
• Generous Tuition Reimbursement Program
• Company-paid holidays and floating holidays
• Company vehicle (if applicable)
• Employee discounts; vehicles, tires, cellular plans, and more
• Networking and employee engagement events
• Personal development to grow your career with us based on your strengths and interests
  
  

Application Deadline: Recruiting timelines vary by position; however, all Tallgrass positions accept applications for at least five business days from the posting date. This position is open and still accepting applications.

Compensation: Compensation ranges are provided in good faith based on what we anticipate when researching wages for this position at the state and national levels. We may ultimately pay more or less than the posted range. This salary range may also be modified in the future.

Notice to External Search Firms: Tallgrass does not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered Tallgrass property; therefore, Tallgrass will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Approved vendors may be invited to refer talent for specific positions at Tallgrass's request only. A fully executed agreement with Tallgrass must be in place and current in these cases.

EEO Statement: Tallgrass complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Tallgrass does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status, or other status protected by law.