What are the responsibilities and job description for the Safety Specialist position at SPS Technologies?
Country
United States of America
State / County
Pennsylvania
City
Mountaintop
Division
Wyman Gordon
Company
Mountaintop
Function
Environmental, Health, and Safety
Workplace Type
On-Site
Position type
Full Time
Opportunity ID
18214
Company Profile
With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job Description
EHS SpecialistWyman-Gordon Pennsylvania, a division of Precision Castparts Corporation (PCC), is a manufacturing leader of Flash Welded and Cold Rolled near net shaped rings for the Aerospace Industry. We are currently seeking a highly motivated, energetic Safety Specialist with multi-site responsibilities. Facilities included PCC Wyman Gordon (Mountaintop), and Tru-Form (Wilkes-Barre). The Safety Specialist will be responsible for communicating and implementing safety and environmental compliance programs to ensure a safe, health and compliant work environment for all facilities. Safety Specialist drives EHS solutions that ensures the Company is always striving for continuous improvement in regards to safety and accountability. The Safety Specialist will report into the EHS Director. ESSENTIAL DUTIES AND RESPONSIBILITIES
Supports the PCC/Wyman Gordon (Company) EH&S program at the Mountaintop and Tru-Form facilities.
Develops and implements EHS related programs and policies in compliance with federal, state, and local regulations.
Recommends, develops and implements improvements in policies, procedures and equipment to prevent incidents and injuries.
Tracks and reports EHS corrective actions from incident investigations and external evaluations. Manages corrective actions being taken in impacted departments.
Responsible for recordkeeping and reporting requirements under permitted environmental processes.
Inspects facility processes to detect existing or potential environmental, safety and health hazards, determines corrective or preventive measures where indicated and follows up to ensure measures have been implemented.
Provides and directs EHS training and annual compliance auditing.
Responsible for the 6S Program for the plants. Provides support to the plants' culture of continuous improvement. Able to lead and participate in 6S workshops to firmly integrate EH&S thinking in all new standards and new procedures developed as a result of continuous improvement.
Provides Sustainability Data collection/preparation.
Assist with all environmental related legal matters, regulatory agency contacts, permitting, and enforcement actions.
Coordinates all facility emergency response and site evacuation programs.
Assists in the management and identification and correction of EHS aspects of industrial engineering projects, maintenance projects, and all other plant EHS risk reduction issues.
Assists with Worker's Compensation process and claims.
Establishes and maintains effective work relationships within the department, the Corpor tion and the community; and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities.
Provides 24-hour on-call response for medical and environmental emergencies.
Other Duties As AssignedQUALIFICATIONS & EDUCATION
Bachelor's Degree with major/emphasis in Occupational Health and Safety or comparable field required.
2 yrs. environment, health, and safety experience within a manufacturing environment
Professional knowledge of federal/state standards (OSHA, EPA, DOT) for a manufacturing environment;
Experience with regulatory filing and reporting
Experience deploying and/or developing effective training programsThe Following skills are desirable:
Demonstrated ability to research specific compliance and regulatory requirements
Strong project management skills
Demonstrates high concern for detail, accuracy and compliance to Company policies/procedures
Ability to work with cross functional groups
Ability to develop, train and implement programs for continuous improvement
Energetic, motivated individual with excellent interpersonal and communication skills
Ability to effectively interact with all levels of employees - production level to executive
Solid understanding of safety and environmental engineering principals with the ability to apply to the company's operations.
Relocation Assistance Available
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.
United States of America
State / County
Pennsylvania
City
Mountaintop
Division
Wyman Gordon
Company
Mountaintop
Function
Environmental, Health, and Safety
Workplace Type
On-Site
Position type
Full Time
Opportunity ID
18214
Company Profile
With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job Description
EHS SpecialistWyman-Gordon Pennsylvania, a division of Precision Castparts Corporation (PCC), is a manufacturing leader of Flash Welded and Cold Rolled near net shaped rings for the Aerospace Industry. We are currently seeking a highly motivated, energetic Safety Specialist with multi-site responsibilities. Facilities included PCC Wyman Gordon (Mountaintop), and Tru-Form (Wilkes-Barre). The Safety Specialist will be responsible for communicating and implementing safety and environmental compliance programs to ensure a safe, health and compliant work environment for all facilities. Safety Specialist drives EHS solutions that ensures the Company is always striving for continuous improvement in regards to safety and accountability. The Safety Specialist will report into the EHS Director. ESSENTIAL DUTIES AND RESPONSIBILITIES
Supports the PCC/Wyman Gordon (Company) EH&S program at the Mountaintop and Tru-Form facilities.
Develops and implements EHS related programs and policies in compliance with federal, state, and local regulations.
Recommends, develops and implements improvements in policies, procedures and equipment to prevent incidents and injuries.
Tracks and reports EHS corrective actions from incident investigations and external evaluations. Manages corrective actions being taken in impacted departments.
Responsible for recordkeeping and reporting requirements under permitted environmental processes.
Inspects facility processes to detect existing or potential environmental, safety and health hazards, determines corrective or preventive measures where indicated and follows up to ensure measures have been implemented.
Provides and directs EHS training and annual compliance auditing.
Responsible for the 6S Program for the plants. Provides support to the plants' culture of continuous improvement. Able to lead and participate in 6S workshops to firmly integrate EH&S thinking in all new standards and new procedures developed as a result of continuous improvement.
Provides Sustainability Data collection/preparation.
Assist with all environmental related legal matters, regulatory agency contacts, permitting, and enforcement actions.
Coordinates all facility emergency response and site evacuation programs.
Assists in the management and identification and correction of EHS aspects of industrial engineering projects, maintenance projects, and all other plant EHS risk reduction issues.
Assists with Worker's Compensation process and claims.
Establishes and maintains effective work relationships within the department, the Corpor tion and the community; and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities.
Provides 24-hour on-call response for medical and environmental emergencies.
Other Duties As AssignedQUALIFICATIONS & EDUCATION
Bachelor's Degree with major/emphasis in Occupational Health and Safety or comparable field required.
2 yrs. environment, health, and safety experience within a manufacturing environment
Professional knowledge of federal/state standards (OSHA, EPA, DOT) for a manufacturing environment;
Experience with regulatory filing and reporting
Experience deploying and/or developing effective training programsThe Following skills are desirable:
Demonstrated ability to research specific compliance and regulatory requirements
Strong project management skills
Demonstrates high concern for detail, accuracy and compliance to Company policies/procedures
Ability to work with cross functional groups
Ability to develop, train and implement programs for continuous improvement
Energetic, motivated individual with excellent interpersonal and communication skills
Ability to effectively interact with all levels of employees - production level to executive
Solid understanding of safety and environmental engineering principals with the ability to apply to the company's operations.
Relocation Assistance Available
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.
