TOOLS AND PARTS ATTENDANT

Help Duties

Identifies user's tools, parts, equipment, and requirements and requisitions stock as needed. Watches and reports items that are in short supply because of breakage or because they are frequently out for repair. Recommends possible substitute or interchangeable items. Sets up and maintains storage locations. Determines methods of storage, identification, and stock location, considering such factors as temperature, humidity, height and weight limits, turnover, floor loading capacities, space available, and convenience of handling items. Compiles records concerned with quantity, cost, and type of material received, stored, and issued.

Prepares periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for-repair, issue, and turn-in records maintained in the tools and parts room. Compiles reports of use of stock handling equipment, adjustments of inventory counts and stock records, spoilage of or damage to stock, location changes, and refusal of shipments.

Ensures that tools and equipment are maintained in good condition by performing visual and operating checks, taking measurements with such devices as calipers, and receiving reports from users on the nature and extent of damage to tools and equipment. May make minor repairs to tools and equipment, determine when damaged and inoperative items are too costly to repair, and report damaged or worn-out equipment to superiors.

Determines stock replenishment levels for centrally controlled supplies and other material within funding limitations. Assures that supplies and monies are not wasted through excess accumulation, and that items are on hand in sufficient quantities and at the time required. In addition to established guides and formulas, determines quantities required and timely stock replenishment.

Receives a wide variety of supplies and specialized items requiring special handling. Ensures that received items are properly stored in assigned locations. Reviews requisitions for completeness and compliance with regulations, and revises quantities ordered based on number on hand. Recommends substitution when supply items are not available.

Searches for identifying or management data on items of supply. Compares data listed on documents with reference sources such as federal catalogs, stock lists, or other publications. Receives requests desiring additional identification data, verification, or comparison of data on hand with reference sources. Searches for stock number, prices, descriptions, sources of supply, or other management data. When unknown, traces part number or type number and manufacturer of the item of equipment.

Edits supply transactions, or provides customer service for urgent critical shortage items and other items requiring special handling when established procedures are not applicable. Codes and classifies requisitions, shipping orders, and other documents, and extracts requests to other sources of supply or refers them to an inventory control point when stock is unavailable or cannot be shipped.

May assist a Surface Maintenance Mechanic by performing the less complex and more routine helper type duties. May perform maintenance tasks with repairers or mechanics by assisting in the accomplishment of duties. This may involve getting tools and supplies, carrying materials, and lifting and holding materials in place during operations. As directed by the repairer or mechanic, uses hand and powered tools of the trade to assist in the disassembly, assembly, and installation of simple component parts and units. Applies knowledge gained from previous work assignments. Detailed instructions are received from the higher graded Surface Maintenance Mechanic with each new assignment. Work is reviewed by the higher-level employee while in progress and upon completion. Cleans tools, parts, and equipment and keeps work areas clean and orderly.

erforms other duties as assigned.

Requirements Conditions of Employment

• Alaska Army National Guard membership is required.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• U.S. Citizenship and Secret Clearance is required.
• Bargaining Unit: Bargaining
• If hired, this position may require regular Occupational Health exams and/or medical standards being met.
• APPOINTMENT FACTORS: Excepted/Enlisted in the Alaska Army National Guard.
• MILITARY GRADE REQUIREMENT: Due to the nature of this position, the minimum military grade is Private First Class (PFC/E3) and the maximum military grade is Staff Sergeant (SSG/E6).
• Must be able to obtain and maintain the appropriate security clearance of the position.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
• OPEN TILL FILLED: This is an open till filled announcement with closing dates being every 30 days from the opening date. Every 30 days, a certificate of eligibles will be issued to the selecting supervisor until the position is filled.
  
  

Qualifications

GENERAL EXPERIENCE is experience or training which demonstrates the knowledge of trade; ability to apply identification skill (matching specific item names, models, and stock or part numbers with similar specific information at stock locations); ability to use simple hand tools (pliers, screwdrivers, etc.) and to follow oral and written instructions.

SPECIALIZED EXPERIENCE is experience which is directly related to the position to be filled and which has equipped you with the particular knowledge, skills and abilities to successfully perform the duties of this position.

WG-06- Must have at least 9 months of experience or training in verifying stock by opening, counting, and visually checking the contents of the containers. Experience in establishing stock location by considering such factors as use, size, shape, and weight of items. Experience in completing stock records by showing the names, quantities, and locations of stock. Experience in identifying correct nomenclature and stock number of items to locate stock for issue. Experience in performing maintenance such as replacing wooden handles on handsaws, changing blades on power saws, and greasing or oiling power and hand tools.

Experience Requirements

Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position.

Skills

Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position:

• Knowledge of the range of items in stock to identify specific items requested by users from descriptions of their intended usage, and to suggest, in the absence of requested items, substitute and interchangeable items that might fit user's requirements.
• Skill in determining when tools and equipment should be sent to test, repair, and calibration shops, and skill in providing evaluations to stock disposal personnel to aid them in determining whether items should be salvaged, repaired, and returned to stock.
• Skill in determining from records such errors as improper item issue and turn-in credit, and the failure of records to show that items have been sent out for repair.
• Skill in identifying, setting up special storage locations, and ensuring that project assigned items are separated from regularly stocked items when they arrive and during their storage.
• Ability to provide information on the status of stock for determining and keeping adequate numbers and types of items on hand.
• Working knowledge of automated systems for stock record accountability.
  
  

Additional Information

• The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
• If you are a current Federal employee or former Federal employee, you must submit a copy of your latest SF-50 "Notification of Personnel Action" and/or a copy of the SF-50. You may submit your most recent performance appraisal.
• The National Guard is exempt from the Veterans Preference Act. Submission of a copy of your DD-214 is not required unless you are hired for technician position.
• If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
• Direct Deposit Program: If selected for technician position with the Alaska National Guard, you will be required to participate in the Direct Deposit Program. (Salary will be automatically deposited to bank/credit union account).
• Military Bonuses And Student Loan Repayment Program: If you are selected for this position, you should always check with your servicing incentive manager (AKARNG - J1 or AKANG - Retention Office) to verify how accepting this position will affect your entitlement prior to considering an offer of employment.
  
  

Read more