What are the responsibilities and job description for the Quality Inspector - Tampa, FL position at Seal Dynamics LLC?
ROLE:
The Quality Control Inspector will perform routine checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* This is a temporary role through October 2026, with the potential to be a permanent position.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Perform assigned inspections on parts, product in process, and finished product
- The ability to use a CMM (Coordinate Measuring Machine) for acceptance of product is preferred.
- Inspect visually for obvious defects
- Compare results with quality standards
- Report inspection and test results to Quality Manager
- Identify defectives and segregate from acceptable product
- Notify Quality Manager and Program Engineer when inspection data exceeds acceptable limits or when major incidents of poor quality are noted
- Record results on inspection forms or charts and report number of defects found
- Post and maintain forms and charts of inspection data, quality levels, or special quality studies as required
- Support the quality record retention requirements by assisting with filing and maintenance of Quality Records
- Assist with scrap processing and removal of test and product samples as required
- Work alternate shifts and/or overtime as required
- Adhere to all Seal Dynamics, Quality & Safety Procedures
- Other duties as assigned
- Two years Technical school education or 3 years experience as an inspector
- American Society for Quality Certified Quality Inspector a plus
- Experience with inspection gauges and test equipment preferred
- Knowledge of ISO 9000 Quality Systems preferred
- Knowledge of Geometric Dimensioning & Tolerancing (GD&T) a plus
- Blueprint Reading
- Inspection Points (i.e. receiving, in-process, final, source, first article)
- Sampling (AQL levels, sampling tables)
- Internal Auditing Techniques desired, but not required
- Proficiency with computer based applications, Microsoft Office and Excel as a minimum
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of the job, the employee may occasionally lift and/or move up to 10 pounds and occasionally lift/move up to 50 pounds. Specific vision capabilities are required for this job to perform tasks typically associated with the inspection process.
WORK ENVIORNMENT:
The work environment characteristics can be described as that of a typical office environment.
Equal Opportunity Employer - Minorities/Women/Protected Veterans/Disabled