What are the responsibilities and job description for the Design Engineer position at Samuel, Son & Co.?
ESSENTIAL FUNCTIONS / RESPONSIBILITIES:
- Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer.
- Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
- Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
- Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc.
OTHER SKILLS AND ABILITIES:
- Welding: Must have a basic understanding of the welding processes utilized at Samuel. This would include application of processes, process characteristics, and representation of necessary welds with appropriate symbols.
- Materials: Must have knowledge of materials utilized. Selection of optimum materials, knowledge of material specifications and part numbers, and ability to accurately assign necessary materials to relevant engineering documents.
- Fabrication: A fundamental knowledge of Samuel’s fabrication methods is required. Basic capabilities and limitations of shop equipment should be utilized to determine to most effective means of product fabrication.
- Code Requirements: Must be able to accurately interpret and comply with ASME code along with a wide variety of customer and outside agency specifications.
- Computer Knowledge: Must be fluent with basic operation of word processing and spreadsheet programs.
- Calculations: Must have basic knowledge of statics and be able to complete appropriate design calculations. Must become proficient with the use of pressure vessel calculation software.
EQUIPMENT KNOWLEDGE:
- Must have proficient knowledge of CAD.
- Microsoft Office Applications
- IFS or similar ERP system
- Must have basic understanding of shop equipment and machinery capabilities.
ROLE REQUIREMENTS:
- Ability to work in a fast-paced environment to meet team expectations.
- Understanding and support of company policies and procedures.
- Ability to understand and abide by all safety rules and regulations to perform the job.
- Must be able to read blueprints.
- Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience. SAM123 Equal Opportunity and E-Verify Employer
Develop engineered documents that accurately reflect the product needs of the customer as well as any third-party organizations. The Design Engineer will be involved with products outside the scope of normal customer requirements and will act as a liaison between necessary Samuel departments and personnel to ensure all facets of such projects are coordinated and completed in a timely and accurate manner.
RESPONSIBILITIES:
- Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager.
- Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
- Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
- Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc.
QUALIFICATIONS:
- Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience.
- Must have proficient knowledge of CAD (AutoDesk Inventor preferred).
- Must be able to accurately interpret and comply with ASME code along with a wide variety of customer and outside agency specifications.
- Must have basic knowledge of statics and be able to complete appropriate design calculations. Must become proficient with the use of pressure vessel calculation software.
- Experience with IFS or similar ERP system
- Must have basic understanding of shop equipment and machinery capabilities.
- Welding: Must have a basic understanding of the welding processes.This would include application of processes, process characteristics, and representation of necessary welds with appropriate symbols.
- Materials: Must have knowledge of materials utilized. Selection of optimum materials, knowledge of material specifications and part numbers, and ability to accurately assign necessary materials to relevant engineering documents.
- Fabrication: A fundamental knowledge of fabrication methods is required. Basic capabilities and limitations of shop equipment should be utilized to determine to most effective means of product fabrication. SAM123 Equal Opportunity and E-Verify Employer
- Develop engineered documents (drawings, calculations, weld maps, design checking, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Monitor and report status of project from inception to shipment and report any delays to the Lead Engineer.
- Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
- Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
- Assist Lead Engineer with special projects including Engineering process improvements, customer design services, etc.
OTHER SKILLS AND ABILITIES:
- Welding: Must have a basic understanding of the welding processes utilized at Samuel. This would include application of processes, process characteristics, and representation of necessary welds with appropriate symbols.
- Materials: Must have knowledge of materials utilized. Selection of optimum materials, knowledge of material specifications and part numbers, and ability to accurately assign necessary materials to relevant engineering documents.
- Fabrication: A fundamental knowledge of Samuel’s fabrication methods is required. Basic capabilities and limitations of shop equipment should be utilized to determine to most effective means of product fabrication.
- Code Requirements: Must be able to accurately interpret and comply with ASME code along with a wide variety of customer and outside agency specifications.
- Computer Knowledge: Must be fluent with basic operation of word processing and spreadsheet programs.
- Calculations: Must have basic knowledge of statics and be able to complete appropriate design calculations. Must become proficient with the use of pressure vessel calculation software.
EQUIPMENT KNOWLEDGE:
- Must have proficient knowledge of CAD.
- Microsoft Office Applications
- IFS or similar ERP system
- Must have basic understanding of shop equipment and machinery capabilities.
ROLE REQUIREMENTS:
- Ability to work in a fast-paced environment to meet team expectations.
- Understanding and support of company policies and procedures.
- Ability to understand and abide by all safety rules and regulations to perform the job.
- Must be able to read blueprints.
- Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience. SAM123 Equal Opportunity and E-Verify Employer
Develop engineered documents that accurately reflect the product needs of the customer as well as any third-party organizations. The Design Engineer will be involved with products outside the scope of normal customer requirements and will act as a liaison between necessary Samuel departments and personnel to ensure all facets of such projects are coordinated and completed in a timely and accurate manner.
RESPONSIBILITIES:
- Develop engineered documents (drawings, calculations, bills of materials, routings, etc) that reflect the needs of the customer and comply with all applicable codes and specifications.
- Monitor and report status of project from inception to shipment and report any delays to the Engineering Manager.
- Communicate with the customer to resolve discrepancies in specifications and keep customer advised of project status.
- Coordinate (either directly or via the customer) the involvement of any necessary outside agencies and include receipt of any necessary document approvals, coordination of on-site inspection visits, etc.
- Assist Engineering Manager with special projects including Engineering process improvements, customer design services, etc.
QUALIFICATIONS:
- Bachelor’s Degree in Engineering or related field or Associates Degree in Mechanical field and 7-10 years related experience.
- Must have proficient knowledge of CAD (AutoDesk Inventor preferred).
- Must be able to accurately interpret and comply with ASME code along with a wide variety of customer and outside agency specifications.
- Must have basic knowledge of statics and be able to complete appropriate design calculations. Must become proficient with the use of pressure vessel calculation software.
- Experience with IFS or similar ERP system
- Must have basic understanding of shop equipment and machinery capabilities.
- Welding: Must have a basic understanding of the welding processes.This would include application of processes, process characteristics, and representation of necessary welds with appropriate symbols.
- Materials: Must have knowledge of materials utilized. Selection of optimum materials, knowledge of material specifications and part numbers, and ability to accurately assign necessary materials to relevant engineering documents.
- Fabrication: A fundamental knowledge of fabrication methods is required. Basic capabilities and limitations of shop equipment should be utilized to determine to most effective means of product fabrication. SAM123 Equal Opportunity and E-Verify Employer