What are the responsibilities and job description for the Feed Mill Utility position at Pilgrim's?
Description
JOB DESCRIPTION
PILGRIMS PRIDE
ELLIJAY COMPLEX
JOB TITLE: Utility Person
ORG. UNIT: Feed Production
ORG. UNIT NUMBER: 30306
LOCATION: Feed Mill
DATE PREPARED/UPDATED: 01/02/02
PREPARED/UPDATED BY: Tommy Mull
Summary
Absence of any related duties or functions in this document does not imply that incumbent may be exempt from assignments required to support production. The primary responsibility of this position is to maintain the cleanliness of the inside and outside of the Feed Mill at all times.
Essential Duties And Responsibilities
Essential duties and responsibilities include the following. Other duties may be assigned as production demands may require:
Non-essential Duties And Functions
May be required to perform other job duties as required and deemed necessary by supervisor.
Notify supervisor of any problems with equipment and/or processes.
May be required to clean beams and equipment at high altitudes. (Using a harness)
Qualifications
To perform this job successfully, and individual must be able to physically perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, sill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Required to stand and walk throughout the day.
Required to hold arms in front of body throughout the period of the workday. (Arm extension may exceed 15 inches)
Repetitive motion with hands, wrist, and arms.
Must have good communication skills.
Must be able to lift up to 70 pounds.
Must be able to read and write in English.
Must be able to work a flexible schedule.
Must be able to climb ladders, stairs, and work at high levels.
Education & Experience
NONE
License And Certification Required
Must review and receive training in the following safety programs:
Hot work permit procedure program
Lockout / Tag-out procedure program
Emergency Evacuation program
Housekeeping program
Safety rules
Work rules
Hazard communication program and chemical list
Confined space entry procedures
Fork lift operator training and license
Training Requirement/Methods
All employees are required to attend employee and safety orientation prior to performing the above duties. Once employee completes this training they will be assigned to a Supervisor who will further orient the employee to the workplace, introduce him/her to employees and other supervision, demonstrate work assignment and explain ingress and egress procedures to and from work station. A training buddy may be assigned to new employees for a period to assist in further training and indoctrination.
Training Responsibilities
Those responsible for training and indoctrination may include: personnel representative, safety director, supervisor, and lead workers as assigned.
Method Of Tracking Employee Progress
The supervisor is accountable for tracking employee progress and performance.
EXIT TRAINING FOR MEASURING TRAINING EFFECTIVENESS
A specific probationary period is assigned to all employees hired to evaluate the employee effectiveness and performance. At the end of this period the supervisor will evaluate the job performance of each new employee utilizing current forms and procedures in effect at that time. The employee will be rated and evaluated on essential work duties listed above as well as attendance, tardiness, interaction with co-workers and management, attitudes and work actions. Unacceptable performance of duties, disciplinary actions will be documented on corrective action reports and appropriate personnel records. Absent any negative actions, the employee may be eligible for a wage increase according to wage and salary policies in effect at that time.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions:
Awkward Postures: (Of Little Concern) Sustained or prolonged static activities (Holding arms at waist level with extension that may exceed 15 inches)
Forceful Exertions: (Of Little Concern) Shoveling of trash, dust, and spilled product
Repetitive Exertions: (Of Possible Concern) Constant motion performing different jobs
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to wet and humid conditions and moving mechanical parts. The employee is occasionally exposed to high precarious places, extreme cold; risk of electrical shock; and vibration. The noise level in the work environment is usually very loud.
Work is performed inside and outside with inclement weather conditions.
PROTECTIVE EQUIPMENT (List any and all personal safety or health protection equipment and gear required by either regulatory or sanitary procedures)
Dust Mask (As needed)
Body Harness (As needed)
Safety Glasses (As needed)
Ear Plugs (In designated areas)
Head Protection (In designated areas)
Work boots with slip-resistant soles and steel toes
Safety Factors To Be Aware Of
Insure proper operations and follow all safety rules and regulations.
Follow all guidelines to operating fork lift, tractor, rotary mower, and lawn mower.
Perform Lock-out Tag-out before operating or repairing machinery
Wear all personal protective equipment.
Proper disposal of all waste.
NOTE: The above statements are intended to describe the general nature and level of the daily work being performed by partners assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, skills or customer specifications and processes required of personnel so assigned.
1
JOB DESCRIPTION
PILGRIMS PRIDE
ELLIJAY COMPLEX
JOB TITLE: Utility Person
ORG. UNIT: Feed Production
ORG. UNIT NUMBER: 30306
LOCATION: Feed Mill
DATE PREPARED/UPDATED: 01/02/02
PREPARED/UPDATED BY: Tommy Mull
Summary
Absence of any related duties or functions in this document does not imply that incumbent may be exempt from assignments required to support production. The primary responsibility of this position is to maintain the cleanliness of the inside and outside of the Feed Mill at all times.
Essential Duties And Responsibilities
Essential duties and responsibilities include the following. Other duties may be assigned as production demands may require:
- Maintain the cleanliness of the inside and outside of the Feed Mill at all times. Sweep, mop, wash, and dust as needed.
- Keep all grounds of the Feed Mill clean at all times by mowing, weed – eating, and picking up trash and spilled feed as needed.
- Place trash, waste feed, etc. from the mill into outside container or landfill trailer for disposal.
- Dust beams, equipment, and railings as needed.
- Paint railing, beams, and walls as directed by supervisor.
- Receive bag ingredients into the feed mill warehouse using a fork lift. All bag ingredients should be neatly arranged for counting and to be used on a first-in, first-out basis. Tape all broken bags to prevent spillage and product contamination.
- Assist maintenance as needed to perform different job duties as directed by supervisor.
Non-essential Duties And Functions
May be required to perform other job duties as required and deemed necessary by supervisor.
Notify supervisor of any problems with equipment and/or processes.
May be required to clean beams and equipment at high altitudes. (Using a harness)
Qualifications
To perform this job successfully, and individual must be able to physically perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, sill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Required to stand and walk throughout the day.
Required to hold arms in front of body throughout the period of the workday. (Arm extension may exceed 15 inches)
Repetitive motion with hands, wrist, and arms.
Must have good communication skills.
Must be able to lift up to 70 pounds.
Must be able to read and write in English.
Must be able to work a flexible schedule.
Must be able to climb ladders, stairs, and work at high levels.
Education & Experience
NONE
License And Certification Required
Must review and receive training in the following safety programs:
Hot work permit procedure program
Lockout / Tag-out procedure program
Emergency Evacuation program
Housekeeping program
Safety rules
Work rules
Hazard communication program and chemical list
Confined space entry procedures
Fork lift operator training and license
Training Requirement/Methods
All employees are required to attend employee and safety orientation prior to performing the above duties. Once employee completes this training they will be assigned to a Supervisor who will further orient the employee to the workplace, introduce him/her to employees and other supervision, demonstrate work assignment and explain ingress and egress procedures to and from work station. A training buddy may be assigned to new employees for a period to assist in further training and indoctrination.
Training Responsibilities
Those responsible for training and indoctrination may include: personnel representative, safety director, supervisor, and lead workers as assigned.
Method Of Tracking Employee Progress
The supervisor is accountable for tracking employee progress and performance.
EXIT TRAINING FOR MEASURING TRAINING EFFECTIVENESS
A specific probationary period is assigned to all employees hired to evaluate the employee effectiveness and performance. At the end of this period the supervisor will evaluate the job performance of each new employee utilizing current forms and procedures in effect at that time. The employee will be rated and evaluated on essential work duties listed above as well as attendance, tardiness, interaction with co-workers and management, attitudes and work actions. Unacceptable performance of duties, disciplinary actions will be documented on corrective action reports and appropriate personnel records. Absent any negative actions, the employee may be eligible for a wage increase according to wage and salary policies in effect at that time.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions:
Awkward Postures: (Of Little Concern) Sustained or prolonged static activities (Holding arms at waist level with extension that may exceed 15 inches)
Forceful Exertions: (Of Little Concern) Shoveling of trash, dust, and spilled product
Repetitive Exertions: (Of Possible Concern) Constant motion performing different jobs
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to wet and humid conditions and moving mechanical parts. The employee is occasionally exposed to high precarious places, extreme cold; risk of electrical shock; and vibration. The noise level in the work environment is usually very loud.
Work is performed inside and outside with inclement weather conditions.
PROTECTIVE EQUIPMENT (List any and all personal safety or health protection equipment and gear required by either regulatory or sanitary procedures)
Dust Mask (As needed)
Body Harness (As needed)
Safety Glasses (As needed)
Ear Plugs (In designated areas)
Head Protection (In designated areas)
Work boots with slip-resistant soles and steel toes
Safety Factors To Be Aware Of
Insure proper operations and follow all safety rules and regulations.
Follow all guidelines to operating fork lift, tractor, rotary mower, and lawn mower.
Perform Lock-out Tag-out before operating or repairing machinery
Wear all personal protective equipment.
Proper disposal of all waste.
NOTE: The above statements are intended to describe the general nature and level of the daily work being performed by partners assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, skills or customer specifications and processes required of personnel so assigned.
1