What are the responsibilities and job description for the Engineer Trainee/Assistant Engineer (Civil Transportation) - NYS HELPS - (Region 8) position at NYS Department of Transportation?
Duties Description
Under the direction and supervision of a licensed professional engineer, the incumbent would perform a variety of duties.
Engineer Trainee’s typical duties may include but are not limited to: transportation geometric design including intersection and work zone design & design of traffic control devise and Intelligent Transportation Systems (ITS). Engineer work to include site investigations, preparation of engineering drawings and construction estimates, traffic engineering and safety studies, highway capacity analyses and traffic management.
Assistant Engineers will perform the aforementioned duties, as well as prepare Traffic Engineering Reports and other project documents, supervise and review the work of engineering and/or traffic systems technicians, perform complex operational analyses for system optimization, coordinates ITS and assist with Surface Transportation Control and work zone quality assurance activities.
This title is part of the New York Hiring for Emergency Limited Placement Statewide Program (NY HELPS).*
Engineer Trainee
To be considered for appointment through NY HELPS, or 55 b/c, candidates must meet the open competitive minimum qualifications for this position. The qualifications are:
Either 1. a bachelor's degree or higher in engineering or engineering technology as listed below;
Or 2. proof of passing the NCEES Fundamentals of Engineering Examination (FE) AND one year of full-time engineering experience as listed below.
As an Engineer Trainee, you will serve a 24-month traineeship that leads to Assistant Engineer, Grade 20. To advance to Assistant Engineer, you must have obtained proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) and successfully completed the requirements of the traineeship to the satisfaction of the appointing authority. At the discretion of the appointing authority, early advancement to the Assistant Engineer is possible if you have obtained your FE and have successfully completed twelve months of the traineeship. It is your responsibility to notify the appointing authority’s personnel office upon obtaining proof of passing the FE. You may receive an increase in salary upon obtaining your FE. Information about this increase will be provided by the appointing authority.
Assistant Engineer
Either 1. Proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) and a qualifying bachelor's degree or higher as listed below;
Or 2. proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) and one year of full-time qualifying engineering experience as listed below.
Qualifying degrees: Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials Engineering, Materials Science and Engineering, Metallurgical and Materials Engineering, Structural Engineering, Transportation Engineering, Transportation Planning and Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees.
Qualifying experience: One year of full-time engineering experience with transportation projects related to highways/roadways, railroads, bridges, airports, waterways, building structures, or traffic management and safety systems.
Candidates may also be qualified for permanent competitive appointment if reachable from the appropriate Civil Service eligible list or eligible for reassignment or transfer in accordance with Civil Service Law.
Additional Comments
Applicants must be currently authorized to work in the United States on a full-time basis.
Your required educational credentials must have been awarded by an educational institution accredited by a regional, national, or specialized agency recognized as an accrediting agency by the United States (U.S.) Department of Education/Secretary of Education. If awarded by an institution outside of the U.S. and its territories, you must provide independent verification of equivalency. A list of companies that provide these services (fees must be paid to the company you choose) can be found at: http://www.cs.ny.gov/jobseeker/degrees.cfmt
The starting salary for an Engineer Trainee position is $66,951.
The starting salary for an Assistant Engineer is $97,673. This amount is comprised of an increased hiring salary of $84,173 with an additional geographic pay differential up to $13,500, specific to this title and location.
The maximum compensation for this position is $107,621. This amount is comprised of the standard job rate of $94,121 with an additional geographic pay differential of $13,500, specific to this title and location.
In addition, a Mid-Hudson Adjustment of $2,000 or a Downstate Adjustment of $4,000 may also apply depending on the location of the position.
Under the direction and supervision of a licensed professional engineer, the incumbent would perform a variety of duties.
Engineer Trainee’s typical duties may include but are not limited to: transportation geometric design including intersection and work zone design & design of traffic control devise and Intelligent Transportation Systems (ITS). Engineer work to include site investigations, preparation of engineering drawings and construction estimates, traffic engineering and safety studies, highway capacity analyses and traffic management.
Assistant Engineers will perform the aforementioned duties, as well as prepare Traffic Engineering Reports and other project documents, supervise and review the work of engineering and/or traffic systems technicians, perform complex operational analyses for system optimization, coordinates ITS and assist with Surface Transportation Control and work zone quality assurance activities.
- Primary point of contact for submission and review of highway work permit (HWP) applications, including certified plans and/or sketches within a defined [Regional] jurisdiction(s) (i.e county or Residency).
- Secondary reviewer of HWPs within a defined [Regional] jurisdiction(s) (i.e county or Residency).
- Assist Regional Project Review and Permit staff with technical reviews of project submissions and/or HWP applications throughout the Region.
- Inspect HWPs during construction and permit close out phases
This title is part of the New York Hiring for Emergency Limited Placement Statewide Program (NY HELPS).*
Engineer Trainee
To be considered for appointment through NY HELPS, or 55 b/c, candidates must meet the open competitive minimum qualifications for this position. The qualifications are:
Either 1. a bachelor's degree or higher in engineering or engineering technology as listed below;
Or 2. proof of passing the NCEES Fundamentals of Engineering Examination (FE) AND one year of full-time engineering experience as listed below.
As an Engineer Trainee, you will serve a 24-month traineeship that leads to Assistant Engineer, Grade 20. To advance to Assistant Engineer, you must have obtained proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) and successfully completed the requirements of the traineeship to the satisfaction of the appointing authority. At the discretion of the appointing authority, early advancement to the Assistant Engineer is possible if you have obtained your FE and have successfully completed twelve months of the traineeship. It is your responsibility to notify the appointing authority’s personnel office upon obtaining proof of passing the FE. You may receive an increase in salary upon obtaining your FE. Information about this increase will be provided by the appointing authority.
Assistant Engineer
Either 1. Proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) and a qualifying bachelor's degree or higher as listed below;
Or 2. proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) and one year of full-time qualifying engineering experience as listed below.
Qualifying degrees: Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials Engineering, Materials Science and Engineering, Metallurgical and Materials Engineering, Structural Engineering, Transportation Engineering, Transportation Planning and Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees.
Qualifying experience: One year of full-time engineering experience with transportation projects related to highways/roadways, railroads, bridges, airports, waterways, building structures, or traffic management and safety systems.
Candidates may also be qualified for permanent competitive appointment if reachable from the appropriate Civil Service eligible list or eligible for reassignment or transfer in accordance with Civil Service Law.
Additional Comments
Applicants must be currently authorized to work in the United States on a full-time basis.
- For the duration of the NY HELPS Program, this title may be filled via a non-competitive appointment, which means no examination is required but all candidates must meet the minimum qualifications of the title for which they apply.
Your required educational credentials must have been awarded by an educational institution accredited by a regional, national, or specialized agency recognized as an accrediting agency by the United States (U.S.) Department of Education/Secretary of Education. If awarded by an institution outside of the U.S. and its territories, you must provide independent verification of equivalency. A list of companies that provide these services (fees must be paid to the company you choose) can be found at: http://www.cs.ny.gov/jobseeker/degrees.cfmt
The starting salary for an Engineer Trainee position is $66,951.
The starting salary for an Assistant Engineer is $97,673. This amount is comprised of an increased hiring salary of $84,173 with an additional geographic pay differential up to $13,500, specific to this title and location.
The maximum compensation for this position is $107,621. This amount is comprised of the standard job rate of $94,121 with an additional geographic pay differential of $13,500, specific to this title and location.
In addition, a Mid-Hudson Adjustment of $2,000 or a Downstate Adjustment of $4,000 may also apply depending on the location of the position.
Salary : $66,951 - $107,621