What are the responsibilities and job description for the Calibration Technician position at Lockheed Martin and Careers?
Job ID: 706287BR
Date posted: Nov. 06, 2025
Description:OCCUPATIONAL SUMMARY
This classification requires the performance of precise calibration measurements and repair functions on electrical/electronic/physical/mechanical type reference and secondary standards, and related equipment.
Maintain these standards and equipment
to the requirements necessary for achieving traceability to the National Institute of Standards and Technology (NIST), the United States Navy, or other recognized national metrology institutes. Work is performed where standards, procedures, and sequences have been determined.
Perform varied work assignments within the
Metrology Organization to acquire the knowledge, skill, and ability required to perform the duties of a qualified Electronic Calibration Technician Senior.
WORK PERFORMED
Work in Metrology functions with technical assistance and guidance or work independently with complete procedures or written instruction after initial on-the-job
instruction and guidance. Work with progressively less guidance and instruction as knowledge, skill, and experience in classification increases.
Perform inspection to determine that equipment to be calibrated is in suitable condition for calibration and use. Troubleshoot and make minor repairs and adjustments needed to accomplish calibration.
Perform calibration tasks in the laboratory or in place on
electrical/electronic/physical/mechanical Test Measurement and Diagnostic Equipment (TMDE) such as, but not limited to: AC/DC voltage, AC/DC current, resistance, capacitance, inductance, power, phase, frequency, microwave, electronic voltmeters, oscilloscopes, signal generators, multi-meters, power supplies, frequency and event counters, digital voltmeters, and test sets, pressure, vacuum, liquid and gas flow, mass, length, optical, temperature, humidity, torque, force, vibration, and tachometry calibrations.
Monitor the performance of the laboratory standards in use and may assist in troubleshooting and repair of laboratory standards.
Use procedures, data sheets, or manufacturers' manuals and specifications in the performance of calibration.
Collect data for trend charts and check standards.
Participate in government and commercial audits and assessments. Assist with and/or perform in place calibrations.
Perform related duties as required.
Basic Qualifications:
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: SPACE
Relocation Available: No
Career Area: Technicians
Type: Full-Time
Shift: First
Date posted: Nov. 06, 2025
Description:OCCUPATIONAL SUMMARY
This classification requires the performance of precise calibration measurements and repair functions on electrical/electronic/physical/mechanical type reference and secondary standards, and related equipment.
Maintain these standards and equipment
to the requirements necessary for achieving traceability to the National Institute of Standards and Technology (NIST), the United States Navy, or other recognized national metrology institutes. Work is performed where standards, procedures, and sequences have been determined.
Perform varied work assignments within the
Metrology Organization to acquire the knowledge, skill, and ability required to perform the duties of a qualified Electronic Calibration Technician Senior.
WORK PERFORMED
Work in Metrology functions with technical assistance and guidance or work independently with complete procedures or written instruction after initial on-the-job
instruction and guidance. Work with progressively less guidance and instruction as knowledge, skill, and experience in classification increases.
Perform inspection to determine that equipment to be calibrated is in suitable condition for calibration and use. Troubleshoot and make minor repairs and adjustments needed to accomplish calibration.
Perform calibration tasks in the laboratory or in place on
electrical/electronic/physical/mechanical Test Measurement and Diagnostic Equipment (TMDE) such as, but not limited to: AC/DC voltage, AC/DC current, resistance, capacitance, inductance, power, phase, frequency, microwave, electronic voltmeters, oscilloscopes, signal generators, multi-meters, power supplies, frequency and event counters, digital voltmeters, and test sets, pressure, vacuum, liquid and gas flow, mass, length, optical, temperature, humidity, torque, force, vibration, and tachometry calibrations.
Monitor the performance of the laboratory standards in use and may assist in troubleshooting and repair of laboratory standards.
Use procedures, data sheets, or manufacturers' manuals and specifications in the performance of calibration.
Collect data for trend charts and check standards.
Participate in government and commercial audits and assessments. Assist with and/or perform in place calibrations.
Perform related duties as required.
Basic Qualifications:
- Possess technical knowledge in the field of physical sciences or electronics equivalent to completion of two years of courses in electronics, metrology, or other related subjects, or successful completion of the basic DoD Calibration School, or an Associate of Science degree in electronics or engineering technology.
- Possess mechanical aptitude and the ability to use general purpose hand tools.
- Skilled in the use of computers and ability to learn new computer applications.
- Ability to qualify for and maintain certifications/qualifications and/or licenses to perform assigned duties.
- Direct calibration and metrology experience.
- Must be a United States Citizen.
- Ability to obtain and maintain a DOD Security Clearance. Must have interim Secret Clearance prior to start.
- Five years of experience calibrating Test Measurement and Diagnostic Equipment
- Proven ability to function successfully in a team environment.
- Excellent Interpersonal and communication skills.
- Working knowledge of Microsoft Word, Excel and other computer software applications.
- ASQ Certified Calibration Technician.
- Attended various training for Metrology, such as DOD PMEL or manufacturer training.
- Familiarity with following procedures and quality inspection verification.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: SPACE
Relocation Available: No
Career Area: Technicians
Type: Full-Time
Shift: First