What are the responsibilities and job description for the Central Office Technician (Travel) position at Jobs via Dice?
Description
This is a travel-based position, and the person must be willing to be away for up to 3-4 weeks at a time. Sites will be all across the country, west of the Mississippi.
This project is to assist with site exit efforts. To start the engineering process, they need to conduct a thorough audit of the existing facilities and decommission equipment. They would like our help with providing resources to conduct the harvesting and decommissioning. Some of the work will require working on lifts.
There will be pre-wiring work in preparation for circuit grooms and support through the migration efforts. This is the process of moving live customer circuits from legacy equipment to other legacy equipment or new equipment.
Central Office technicians have this kind of experience. This work will primarily be done during the day inside of COs and warehouse environments.
The work week will be Sunday night through Friday morning. There will be occasional overnight work for cutovers
This is a 2-year-plus project
Below are details about the kind of information this technician will do for the audit portion of the project.
1.1 General Cable Audit Services
Infinera/Coriant to provide physical Network Element (NE) facility "point to point" audit, which includes: (Equipment includes ADMs, DCS, DWDM and Data Systems)
Coax Cabling
CAT5 cabling
1.2.1 Spreadsheet Column Labeling
One column for "CenturyLink Circuit ID" (PRO, EON, RSI) from label.
One column for "Notes" (other information) from label.
If the Circuit ID is not on the Label, then note "Not on Label" in the approximate column for that fiber. The cell should not be left blank.
If there is no Label on the fiber or panel, then note "No Label" in the approximate column for that fiber. The cell should not be left blank.
Do not include the TO and FROM information from the label.
One column for Fiber Connected - YES or NO
A separate column for the Light Level
Do not record the fiber direction (I/O, TX/RX).
1.3 Riser Audit Services
1.3.1 CRE CenturyLink Far-End Riser
Audit other end of the Riser, up to where CenturyLink space ceases
Verify the back side of the Risers correlate between the two ends of the Riser.
1.3.2 CRE Non-CenturyLink Far-End Riser
Work with GFS for access to non-CenturyLink spaces
Verify the back side of the Risers correlate between the two ends of the Riser
Verify Light or Below -46db Light on each fiber
Document positions with fibers at Far-End Riser
Compare positions connected at each end to make sure they are correlated
Skills
Telco Equipment Experience, Trouble Shoot, Equipment Auditing, Central Office, Technician, Routers, Switches, fiber optic network, telecommunication, Circuit Grooms, Telco Cabinet, DSX Panel, dwdm, sonet, muxe
Top Skills Details
Telco Equipment Experience,Trouble Shoot,Equipment Auditing,Central Office,Technician,Routers,Switches,fiber optic network,telecommunication
Additional Skills & Qualifications
Attention to detail
Understanding of what to do and not do in a CO.
For overnight travel, techs will be able to expense up $180/day, including hotel and food per diem.
There are times when they need to use their own vehicle. $0.70/mile for mileage.
Experience Level
Intermediate Level
Job Type & Location
This is a Contract position based out of Denver, CO.
Pay And Benefits
The pay range for this position is $30.00 - $34.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Denver,CO.
Application Deadline
This position is anticipated to close on Dec 23, 2025.
>About TEKsystems:
We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
About TEKsystems And TEKsystems Global Services
We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
This is a travel-based position, and the person must be willing to be away for up to 3-4 weeks at a time. Sites will be all across the country, west of the Mississippi.
This project is to assist with site exit efforts. To start the engineering process, they need to conduct a thorough audit of the existing facilities and decommission equipment. They would like our help with providing resources to conduct the harvesting and decommissioning. Some of the work will require working on lifts.
There will be pre-wiring work in preparation for circuit grooms and support through the migration efforts. This is the process of moving live customer circuits from legacy equipment to other legacy equipment or new equipment.
Central Office technicians have this kind of experience. This work will primarily be done during the day inside of COs and warehouse environments.
The work week will be Sunday night through Friday morning. There will be occasional overnight work for cutovers
This is a 2-year-plus project
Below are details about the kind of information this technician will do for the audit portion of the project.
1.1 General Cable Audit Services
Infinera/Coriant to provide physical Network Element (NE) facility "point to point" audit, which includes: (Equipment includes ADMs, DCS, DWDM and Data Systems)
Coax Cabling
- Equipment to DSX-3 equipment side information to be included in Detailed Inventory EXCEL spreadsheet and verified onsite
- Identifies DSX-3 to DSX-3 cross-connections
- Verify all fiber connections within the CenturyLink space with the Fiber Finder test equipment
- Fibers with below -46db light present will not be audited
- If there is a fiber with light connected, then document what the fiber is connected to (e.g. equipment and port) and Light Level status in Detailed Inventory EXCEL spreadsheet and verified onsite
- If access to fibers on the backside of a panel would place traffic at risk, flag and advice CenturyLink
- Identify Fiber Panel type. (EQPT, Riser, OSP, etc.)
- Verify all equipment ports, with facilities connected, are accounted for on the demarcation panel audit
- Include paths for any equipment ports that do not connect to demarcation panels (equipment to equipment facilities)
- Telemetry facilities do not need to be audited
- Riser FDP connections including the other side of the Riser connection up to where
- On-site fiber labels will be recorded
CAT5 cabling
- Equipment to end point connections to be included in Detailed Inventory EXCEL spreadsheet and verified onsite
- Use a DS3 test equipment to monitor the DS3 signal at the DSX-3 monitor jack.
- Determine if the DS3 circuit status to be in USE or in ALARM and potentially not in use.
1.2.1 Spreadsheet Column Labeling
One column for "CenturyLink Circuit ID" (PRO, EON, RSI) from label.
One column for "Notes" (other information) from label.
If the Circuit ID is not on the Label, then note "Not on Label" in the approximate column for that fiber. The cell should not be left blank.
If there is no Label on the fiber or panel, then note "No Label" in the approximate column for that fiber. The cell should not be left blank.
Do not include the TO and FROM information from the label.
- Use the TO and FROM location information to identify and document the other end of the fiber in the CenturyLink space
One column for Fiber Connected - YES or NO
A separate column for the Light Level
- Normal = above -34db
- LOW = -35db TO -45db
- NO = below -46db
Do not record the fiber direction (I/O, TX/RX).
1.3 Riser Audit Services
1.3.1 CRE CenturyLink Far-End Riser
Audit other end of the Riser, up to where CenturyLink space ceases
Verify the back side of the Risers correlate between the two ends of the Riser.
1.3.2 CRE Non-CenturyLink Far-End Riser
Work with GFS for access to non-CenturyLink spaces
Verify the back side of the Risers correlate between the two ends of the Riser
Verify Light or Below -46db Light on each fiber
Document positions with fibers at Far-End Riser
Compare positions connected at each end to make sure they are correlated
Skills
Telco Equipment Experience, Trouble Shoot, Equipment Auditing, Central Office, Technician, Routers, Switches, fiber optic network, telecommunication, Circuit Grooms, Telco Cabinet, DSX Panel, dwdm, sonet, muxe
Top Skills Details
Telco Equipment Experience,Trouble Shoot,Equipment Auditing,Central Office,Technician,Routers,Switches,fiber optic network,telecommunication
Additional Skills & Qualifications
Attention to detail
Understanding of what to do and not do in a CO.
For overnight travel, techs will be able to expense up $180/day, including hotel and food per diem.
There are times when they need to use their own vehicle. $0.70/mile for mileage.
Experience Level
Intermediate Level
Job Type & Location
This is a Contract position based out of Denver, CO.
Pay And Benefits
The pay range for this position is $30.00 - $34.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Denver,CO.
Application Deadline
This position is anticipated to close on Dec 23, 2025.
>About TEKsystems:
We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
About TEKsystems And TEKsystems Global Services
We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Salary : $30 - $34