What are the responsibilities and job description for the Aerospace Anodize Operator - 1st Shift position at Hytek Finishes Co.?
Job Overview
Title: Anodize Operator
Reports to: Production Managers (Value Stream or Shift)
Location: Kent, WA
Type: Full Time, Non-Exempt (hourly)
Schedule: 1st Shift
Hytek production is open 24 hours per day. All shifts are as follows: 1st shift (Monday - Friday, 6:00 a.m. - 2:30 p.m.), 2nd shift (Monday - Friday, 2:00 p.m. - 10:30 p.m.), 3rd shift (Sunday - Friday, 10:00 p.m. - 6:30 a.m.)
Job Summary
Employees in this position use a variety of methods to process parts in preparation for plating and other coatings. The operators perform operations in accordance with Military and OEM specifications. This is a trainee operator position in our Anodize department. Employees in this position will process a variety of parts in our Anodize department. Anodize Operators may be required to join the Federal Aviation Administration (FAA) DOT Drug & Alcohol Testing Program*. The Anodize Operators perform operations in accordance with Military, Industry and OEM specifications.
Work closely with experienced Anodize Operator to complete work and prioritize tasks for On-Time delivery.
Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards.
Prepare parts prior to operations including racking; use proper tooling and fixtures, when applicable.
Legibly sign off on work once completed and Operator Self Verification inspection has occurred.
General review of paperwork and Operator Self Verification inspection of job to ensure all previous operations were completed. Notify supervisor and Quality Assurance if any errors.
Knowledge of pre and post cleaning surface finish requirements.
Familiar with Quality Assurance requirements & rework procedures.
Be familiar with engineering drawing notations.
Be familiar with the safety precautions & know how to avoid injury to personnel.
Actively participate in continuous improvement activities to drive positive change in productivity, delivery, and service. Be involved in Kaizen events as needed either as a participant or supporter.
Maintain the highest ethical standards, even when challenged from above.
Other duties as assigned.
Qualifications
May be required to join the FAA Repair Station program, including the FAA Drug & Alcohol random selection pool.
Required to participate in annual Hearing Conservation testing.
Ability to wear appropriate Personal Protective Equipment, including safety glasses, hearing protection, and other PPE based upon requirements in working area.
Demonstrated ability to train and positively influence others.
Must be a self-starter, able to work both independently, as a team, and with customers (both internally and externally).
Excellent accuracy with a strong attention to detail.
Ability to solve tactical and strategic problems and issues arising in this position.
Ability to learn and use Lean Tools and techniques to solve tactical and strategic problems and issues arising in this position.
Ability to multi task effectively.
Must have a regular and dependable attendance record.
Ability to Read/Write Communicate in English with Customers and auditors.
Must be authorized to work in the U.S. An export license will be required to work in all areas of the facility.
Education/Previous Experience Requirements
1-2 years in manufacturing environment a plus.
Essential Mental/Physical Demands
Ability to lift occasionally up to 63 lbs. occasionally
Abili
Title: Anodize Operator
Reports to: Production Managers (Value Stream or Shift)
Location: Kent, WA
Type: Full Time, Non-Exempt (hourly)
Schedule: 1st Shift
Hytek production is open 24 hours per day. All shifts are as follows: 1st shift (Monday - Friday, 6:00 a.m. - 2:30 p.m.), 2nd shift (Monday - Friday, 2:00 p.m. - 10:30 p.m.), 3rd shift (Sunday - Friday, 10:00 p.m. - 6:30 a.m.)
Job Summary
Employees in this position use a variety of methods to process parts in preparation for plating and other coatings. The operators perform operations in accordance with Military and OEM specifications. This is a trainee operator position in our Anodize department. Employees in this position will process a variety of parts in our Anodize department. Anodize Operators may be required to join the Federal Aviation Administration (FAA) DOT Drug & Alcohol Testing Program*. The Anodize Operators perform operations in accordance with Military, Industry and OEM specifications.
- FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Work closely with experienced Anodize Operator to complete work and prioritize tasks for On-Time delivery.
Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards.
Prepare parts prior to operations including racking; use proper tooling and fixtures, when applicable.
Legibly sign off on work once completed and Operator Self Verification inspection has occurred.
General review of paperwork and Operator Self Verification inspection of job to ensure all previous operations were completed. Notify supervisor and Quality Assurance if any errors.
Knowledge of pre and post cleaning surface finish requirements.
Familiar with Quality Assurance requirements & rework procedures.
Be familiar with engineering drawing notations.
Be familiar with the safety precautions & know how to avoid injury to personnel.
Actively participate in continuous improvement activities to drive positive change in productivity, delivery, and service. Be involved in Kaizen events as needed either as a participant or supporter.
Maintain the highest ethical standards, even when challenged from above.
Other duties as assigned.
Qualifications
May be required to join the FAA Repair Station program, including the FAA Drug & Alcohol random selection pool.
Required to participate in annual Hearing Conservation testing.
Ability to wear appropriate Personal Protective Equipment, including safety glasses, hearing protection, and other PPE based upon requirements in working area.
Demonstrated ability to train and positively influence others.
Must be a self-starter, able to work both independently, as a team, and with customers (both internally and externally).
Excellent accuracy with a strong attention to detail.
Ability to solve tactical and strategic problems and issues arising in this position.
Ability to learn and use Lean Tools and techniques to solve tactical and strategic problems and issues arising in this position.
Ability to multi task effectively.
Must have a regular and dependable attendance record.
Ability to Read/Write Communicate in English with Customers and auditors.
Must be authorized to work in the U.S. An export license will be required to work in all areas of the facility.
Education/Previous Experience Requirements
1-2 years in manufacturing environment a plus.
Essential Mental/Physical Demands
Ability to lift occasionally up to 63 lbs. occasionally
Abili