What are the responsibilities and job description for the Maintenance Support Champion position at FieldBridge Energy?
Pay rate: ***-***/hr (Based on experience)
Monday to Friday 8am to 5pm
No per diem
Work Training Location: NEST in Kellyville
Local Candidate required- Interviews will be in person and prefer someone with experience in oil/gas industry
Minimum of 3-5 years experience
Education: High School Diploma & Machining certification
Must have the following:
Understand CNC Machine Processors and G-Code
Machine tooling and tool life management
CAD based software and GD&T Tolerancing for Engineering Drawing
Candidate will work with the following types of equipment:
CNC Lathes (Mori Seiki - MAPPS and Puma- Fanuc)
Some manual Lathe, Mill, etc. for tooling.
Dress code is business casual - PPE will be provided
CNC Lathe Programmer Posting
Core Needs:
* Analyze drawings, 3D models, and design data to determine part geometry, machining strategy, tool paths, and optimal cutting conditions.
* Write, verify, and optimize CNC programs using CAM-generated post-processor outputs (via CimPro) and manual G-code adjustments as needed, ensuring safe, efficient, and production-aligned machining processes.
* Collaborate with machinists, tooling vendors, and production supervisors to optimize tool paths, improve tool availability, maintain accurate setup sheets, and validate tooling performance.
* Revise programs and setups to improve cycle times, reduce tool wear, enhance surface finish, and meet dimensional accuracy.
* Use the guiding principles and tools of the Manufacturing System to drive continuous improvement in machining work centers and asset turnaround through reduced downtime, improved maintenance response, and enhanced reliability.
* Foster a culture of continuous improvement by developing and executing initiatives that increase asset utilization, reliability, and cost-of-service delivery (CoSD) performance.
Modernization & Digital Manufacturing
* Lead the transition from manual/conversational programming to fully integrated CAD-to-CAM workflows, ensuring consistency through standardized CimPro post-processors.
* Utilize simulation-based verification and digital twin environments for toolpath validation, collision detection, and machine utilization planning.
* Support and implement DNC or networked program management systems for CNC file distribution.
* Participate in the selection, testing, and deployment of new CAD/CAM and post-processor technologies, and assist in creating training materials for programming.
Data & System Integration
* Maintain the DLO and SLB-IAM system for SLB Digital applications compliance & server maintenance.
* Maintain accurate and secure digital records of CNC programs, revisions, and related documentation.
Quality, Safety, and Compliance
* Apply Design for HSE (Health, Safety, and Environment) tools to identify and mitigate risks, ensuring safe, ergonomic, and environmentally responsible machining processes.
* Support technical audits, safety assessments, and failure investigations as assigned by Reliability, CoSD, or Maintenance Manager, following up on required actions.
* Monitor data integrity and completeness within the CMMS to support CoSD and reliability analysis.
Desired Qualifications
* Proficiency in a CAD/CAM system such as Fusion 360, Mastercam, or EdgeCam.
* Proficiency in PLM software Windchill
* Experience with CimPro post-processor customization and DNC/digital machining workflows.
* Strong understanding of G-code/M-code and Fanuc/MAPPS control systems.
* Skilled in multi-axis machining, fixture design, tooling selection, and complex toolpath development.
* Demonstrated success in leading CAD/CAM modernization or software migration initiatives
VEVRAA Federal Contractor. Priority referral of vets requested. An Equal Opportunity Employer: females, minorities, veterans, disabled and other protected groups.
Monday to Friday 8am to 5pm
No per diem
Work Training Location: NEST in Kellyville
Local Candidate required- Interviews will be in person and prefer someone with experience in oil/gas industry
Minimum of 3-5 years experience
Education: High School Diploma & Machining certification
Must have the following:
Understand CNC Machine Processors and G-Code
Machine tooling and tool life management
CAD based software and GD&T Tolerancing for Engineering Drawing
Candidate will work with the following types of equipment:
CNC Lathes (Mori Seiki - MAPPS and Puma- Fanuc)
Some manual Lathe, Mill, etc. for tooling.
Dress code is business casual - PPE will be provided
CNC Lathe Programmer Posting
Core Needs:
* Analyze drawings, 3D models, and design data to determine part geometry, machining strategy, tool paths, and optimal cutting conditions.
* Write, verify, and optimize CNC programs using CAM-generated post-processor outputs (via CimPro) and manual G-code adjustments as needed, ensuring safe, efficient, and production-aligned machining processes.
* Collaborate with machinists, tooling vendors, and production supervisors to optimize tool paths, improve tool availability, maintain accurate setup sheets, and validate tooling performance.
* Revise programs and setups to improve cycle times, reduce tool wear, enhance surface finish, and meet dimensional accuracy.
* Use the guiding principles and tools of the Manufacturing System to drive continuous improvement in machining work centers and asset turnaround through reduced downtime, improved maintenance response, and enhanced reliability.
* Foster a culture of continuous improvement by developing and executing initiatives that increase asset utilization, reliability, and cost-of-service delivery (CoSD) performance.
Modernization & Digital Manufacturing
* Lead the transition from manual/conversational programming to fully integrated CAD-to-CAM workflows, ensuring consistency through standardized CimPro post-processors.
* Utilize simulation-based verification and digital twin environments for toolpath validation, collision detection, and machine utilization planning.
* Support and implement DNC or networked program management systems for CNC file distribution.
* Participate in the selection, testing, and deployment of new CAD/CAM and post-processor technologies, and assist in creating training materials for programming.
Data & System Integration
* Maintain the DLO and SLB-IAM system for SLB Digital applications compliance & server maintenance.
* Maintain accurate and secure digital records of CNC programs, revisions, and related documentation.
Quality, Safety, and Compliance
* Apply Design for HSE (Health, Safety, and Environment) tools to identify and mitigate risks, ensuring safe, ergonomic, and environmentally responsible machining processes.
* Support technical audits, safety assessments, and failure investigations as assigned by Reliability, CoSD, or Maintenance Manager, following up on required actions.
* Monitor data integrity and completeness within the CMMS to support CoSD and reliability analysis.
Desired Qualifications
* Proficiency in a CAD/CAM system such as Fusion 360, Mastercam, or EdgeCam.
* Proficiency in PLM software Windchill
* Experience with CimPro post-processor customization and DNC/digital machining workflows.
* Strong understanding of G-code/M-code and Fanuc/MAPPS control systems.
* Skilled in multi-axis machining, fixture design, tooling selection, and complex toolpath development.
* Demonstrated success in leading CAD/CAM modernization or software migration initiatives
VEVRAA Federal Contractor. Priority referral of vets requested. An Equal Opportunity Employer: females, minorities, veterans, disabled and other protected groups.
