Maintenance Technician I/II - CPEN

JOB

Appointment Type:

This position is contingent upon the candidate’s ability to obtain and maintain access approval for both DBIDS CPEN and DBIDS Naval Weapons Station.

This is a full-time, benefited term appointment with Fallbrook Public Utility District for an initial period of five (5) years. The selected candidate will be an employee of the District, not a federal employee, and will receive full benefits, including participation in the District’s retirement system.

Continuation beyond the initial term may be considered based on funding availability, operational needs, satisfactory performance, and approval by the partnering federal agency; however, extension is not guaranteed. The District intends to provide a minimum of six (6) months’ notice prior to the end of the term regarding the status of the position.

During the term appointment, the employee may apply for and be considered for other District positions in accordance with applicable District policies and procedures.

Duty Location:
Wastewater Treatment Plant, Camp Pendleton and Fallbrook, California.

DEFINITION
This series specification describes two classes that perform varied potable, recycled and wastewater equipment maintenance and mechanical work; a variety of routine facility and grounds maintenance and landscaping duties; building electrical and lighting maintenance, and pump and motor maintenance; reads, records and reports readings; cleans and maintains equipment along with repairs and performs related work as required.

CLASS CHARACTERISTICS

Maintenance Technician I
The Maintenance Technician I performs the maintenance and mechanical tasks involving the use of hand tools and motorized equipment; performs grounds keeping and janitorial work, including herbicide/pesticide application and tree trimming; performs routine preventative maintenance tasks related to pumps, motors, and various mechanical equipment; provides assistance with complex electrical and mechanical installation and maintenance tasks and engages in on-the-job training.

Maintenance Technician II
Positions at the Maintenance Technician II level are regularly assigned to perform semiskilled and skilled tasks in the maintenance and operation of the District’s water and wastewater systems. Incumbents at this level operate a variety of light and moderately heavy equipment to perform routine maintenance and mechanical tasks, including routine maintenance of pumps, motors, electrical and mechanical equipment. Incumbents are assigned maintenance where they are expected to have sufficient skill and knowledge to work productively and safely without constant direction and supervision.

EXAMPLE OF DUTIES Maintenance Technician I

• Installs and maintains mechanical equipment and components including pumps, electric motors, and miscellaneous valves and piping configurations;
• Performs grounds keeping as needed;
• Maintains and makes repairs to sprinkler systems;
• Performs basic maintenance of a complex primary/secondary and tertiary treatment systems.
• Performs basic mechanical maintenance at potable and wastewater facilities such as pump stations, pressure regulators, lift station and solids handling;
• Performs general building and plant custodial duties including minor repairs as directed;
• Originates work orders and completes preventative maintenance on a variety of equipment across District sites;
• Cleans and paints equipment, valves and piping structures as required;
• Operates dump trucks, tractors, boom trucks, and other such equipment;
• Performs routine inspections and preventative maintenance of various equipment, tanks, structures, air-handling equipment, including checking for damage, oil leaks, excessive noise or abnormal conditions and keeps supervisor informed of systems status and conditions;
• Performs limited maintenance tasks for solar generation equipment, visual panel and equipment inspections, PV cable management, weed abatement and dust management around solar fields and electrical equipment;
• Performs limited work, determined by task-specific qualification, on low voltage circuits using proper lockout/tagout procedures;
• Assists qualified electrical workers with various installation jobs, including trenching, conduit runs and wire pulling; and
• Performs other duties as assigned.

Maintenance Technician II
In addition to all duties of the Maintenance Technician I, the Maintenance Technician II shall:

• Troubleshoot and repair pump and motor bearings, seals, pump packing, seal water lines, motor couplings, motor alignments, chemical pumps, double disc diaphragm pumps, aeration blowers, valves and pipe repairs;
• Removes and installs pumps and motors with various lifting mechanisms, including cranes and hoists, adhering to proper lifting and signaling protocols;
• Performs moderately difficult operation of light, medium and heavy construction equipment such as a backhoe, man lift, front loader, small crane and trailer;
• Receives on-the-job training in more difficult equipment operations;
• Performs tasks in proper sequence and without direction;
• Performs semi-skilled and skilled manual tasks to check, test, troubleshoot, service, repair, rebuild, install and align facility and pump station pumps, electrical motors, air compressors, drive units and gear boxes, tank chains, sprockets, skimmers and center columns;
• Disassembles, inspects, determines damage, observes and notes reoccurrence of similar failures and recommends improvements to preventative maintenance schedules and tasks;
• Troubleshoots electrical motors and controls;
• Reads and interprets electrical schematics conducts insulation resistance testing for motor leads and windings;
• Makes up motor lead terminations and verifies proper rotation;
• Performs thermography testing and other motor control preventative maintenance functions; and
• Performs other duties as assigned.

SUPPLEMENTAL INFORMATION LICENSE AND CERTIFICATION

• Possession of a valid and appropriate California driver’s license
• Plant Maintenance Technologist I or Mechanical Technologist certification
• Wastewater Treatment Plant Operator I
• Mechanical Technologist II certification

EDUCATION, TRAINING AND EXPERIENCE

Education: High school graduation or GED.

Training & Experience:

Maintenance Technician I
High school graduation or GED and one year of experience performing grounds keeping and routine building maintenance work involving the use of hand and power tools and the performance of strenuous manual labor.

Maintenance Technician II
High school graduation or GED three years of responsible and varied experience in the installation, maintenance and repair of a potable water treatment and/or distribution system equipment, or wastewater and/or recycled water system equipment; or three years of experience at or equivalent to the level of Maintenance Technician I at Fallbrook Public Utility District from which the incumbent has acquired the knowledge and abilities listed above.

SALARY RANGE
Maintenance Technician I

18 = No Certification - $38.49 - $48.08

19 = Plant Maintenance Technologist I or Mechanical Technologist I - $ 39.45 - $49.27

20 = Plant Maintenance Technologist I or Mechanical Technologist I Wastewater Treatment Plant Operator I - $40.44 - $50.51

Maintenance Technician II

21 = No Certification - $41.46 - $51.77

22 = Plant Maintenance Technologist I or Mechanical Technologist I Wastewater Treatment Plant Operator I - $ 42.49 – $ 53.07

23 = Mechanical Technologist II Wastewater Treatment Plant Operator I - $43.55 - $54.39

24 = Mechanical Technologist II Wastewater Treatment Plant Operator I CWEA EIT Grade 1 - $44.64 - $55.75