What are the responsibilities and job description for the I&E Technician (Can Plant) position at Envases US Aluminum Division?
Brief Description
POSITION SUMMARY:
Our Waco, TX facility manufactures aluminum beverage cans commonly used for soft drinks, beers, energy drinks, teas and non-carbonated beverages. Using state of the art can-making technology, this high speed environment provides rewarding manufacturing opportunities.
The Instrumentation & Electronics Technician is responsible for the calibration, maintenance, troubleshooting, and repair of all process control instrumentation, electronic devices, and electrical automation components within the plant. This role ensures the accuracy and reliability of monitoring and control systems (PLCs, sensors, communication networks) that govern critical processes like high-speed machine timing, temperature control, and dimensional quality verification.
Essential Job Functions
CALIBRATION AND INSTRUMENTATION
EDUCATION & EXPERIENCE:
Required
The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. Management maintains the right to assign or reassign duties and responsibilities to this job at any time.
Environmental & Physical Factors
The physical demands and work environment described below represent the activities and surroundings of the position(s). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Works primarily in a warehouse/manufacturing facility. Daily contact with other departmental personnel. Occasionally works in all weather conditions, extreme temperatures, around chemicals and chemical fumes/emissions, dusty & clean environments. Frequently works with electrical and mechanical hazards. When working with surplus and scrap materials, will frequently be required to work outside and/or in an unaired conditioned warehouse. Continuous use of vision, hearing and speech. Frequent sitting, standing, walking and occasional bending. Will lift, carry, pull / push, and reach for supplies and on occasion lifting (up to 50 lbs.) while performing various aspects of the job. Will need to climb stairs, climb ladders, lift and move objects, requires manual dexterity and repetitive use of keyboard/computer devices/power tools/machining equipment; Wear safety equipment, such as earplugs, goggles, and steel-toed shoes.
Hours / Special Conditions
12 hour rotating shifts 4 days on and 4 days off; Rotating shifts requires working night shifts; Present to fulfill job duties & meet operational demands/support; Schedule may vary depending on plant operational needs thus flexibility is required which may include long days, evenings, weekends, holidays and overtime; Regular and predictable attendance is an essential function of this position
Envases Commerce, LLC is an Equal Opportunity Employer.
POSITION SUMMARY:
Our Waco, TX facility manufactures aluminum beverage cans commonly used for soft drinks, beers, energy drinks, teas and non-carbonated beverages. Using state of the art can-making technology, this high speed environment provides rewarding manufacturing opportunities.
The Instrumentation & Electronics Technician is responsible for the calibration, maintenance, troubleshooting, and repair of all process control instrumentation, electronic devices, and electrical automation components within the plant. This role ensures the accuracy and reliability of monitoring and control systems (PLCs, sensors, communication networks) that govern critical processes like high-speed machine timing, temperature control, and dimensional quality verification.
Essential Job Functions
CALIBRATION AND INSTRUMENTATION
- Calibration: Perform scheduled and corrective calibration of field instrumentation, including flow meters (magnetic, Coriolis), temperature transmitters (RTDs, thermocouples), pressure sensors, pH probes, and conductivity sensors.
- Precision Measurement Systems: Maintain and calibrate specialized electronic inspection and dimensional measurement systems used on high-speed lines (e.g., Light Testers, vision systems, enamel raters, coating weight testers).
- Documentation: Maintain accurate, detailed records of all calibration activities, instrument status, and test results in compliance with Quality Management Systems and regulatory standards.
- PLC/HMI Maintenance: Troubleshoot, repair, and replace components within Allen-Bradley Programmable Logic Controller (PLC), Distributed Control System (DCS), and Human-Machine Interface (HMI) hardware and software. Assist engineering with program modifications and system upgrades.
- Sensor and I/O: Diagnose and repair faults in control circuits, including proximity sensors, photo eyes, level transmitters, encoders, and network communication modules (e.g., Ethernet/IP, Profibus).
- VFD and Drives: Troubleshoot and maintain electronic components of Variable Frequency Drives (VFDs), servo drives, and DC motor controls used to regulate machine speed and timing.
- Low-Voltage Systems: Maintain and troubleshoot communication systems, industrial networking equipment, and electronic data collection devices.
- Advanced Diagnostics: Utilize multimeters, calibrators, oscilloscopes, and specialized software to diagnose intermittent and complex electronic and instrumentation faults across various plant departments (Front End, Decorator, Back End, and Utilities).
- Root Cause Analysis (RCA): Participate in structured problem-solving efforts to determine the electronic or instrumentation root causes of repetitive quality and downtime issues.
- Safety Compliance: Rigorously adhere to all plant safety regulations, especially Lockout/Tagout (LOTO) procedures, and practices for working safely with electrical components and high-voltage panels (up to 480V).
- Calibration Expertise: Proven expertise in the theory, operation, and calibration of standard industrial instrumentation and analytical equipment.
- PLC Troubleshooting: Strong functional knowledge and experience troubleshooting Allen-Bradley PLC hardware and software.
- Electronics: Advanced understanding of analog and digital circuitry, control loops, and signal conditioning.
- Technical Reading: Expert ability to read and interpret complex Process and Instrumentation Diagrams (P&IDs) and electrical schematics.
- Problem Solving: Exceptional analytical and structured troubleshooting skills to address intricate control system failures.
- Availability: Must be able to work rotating shifts, including nights, weekends, and holidays, and be available for emergency technical support.
- Ability to work with employees from many different cultures and backgrounds
EDUCATION & EXPERIENCE:
Required
- Education: High School Diploma or GED equivalent.
- Experience: 3–5 years of specialized experience maintaining instrumentation and electronic controls in a high-speed manufacturing or continuous process environment.
- Technical Skills: Proficient in reading electrical schematics, P&IDs, and ladder logic. Experience with Allen-Bradley PLC hardware.
- Tools: Demonstrated ability to use precision electrical test equipment and hand tools.
- 24/7 Operational Support: This role requires a commitment to a continuous shift rotation (including nights, weekends, and holidays).
- Emergency Response: Must be available for on-call emergencies regarding critical utility failures that threaten production continuity.
- Experience in High-Speed Manufacturing (Beverage, Food, or Pharma) is highly preferred.
- Prior experience in metal forming, packaging, or high-volume consumer goods (FMCG).
- Associate degree in Electronics, Instrumentation, or Electrical Technology.
- ISA Certified Control Systems Technician (CCST) or equivalent professional certification.
- Experience with Ignition SCADA or similar industrial software platforms.
- Prior experience in the aluminum packaging or beverage industry.
- Familiarity with Lean Manufacturing or Six Sigma principles.
- Experience using precision measurement tools (calipers, micrometers).
- General knowledge of basic accessing information on the computer or entering data in a computer system
The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. Management maintains the right to assign or reassign duties and responsibilities to this job at any time.
Environmental & Physical Factors
The physical demands and work environment described below represent the activities and surroundings of the position(s). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Works primarily in a warehouse/manufacturing facility. Daily contact with other departmental personnel. Occasionally works in all weather conditions, extreme temperatures, around chemicals and chemical fumes/emissions, dusty & clean environments. Frequently works with electrical and mechanical hazards. When working with surplus and scrap materials, will frequently be required to work outside and/or in an unaired conditioned warehouse. Continuous use of vision, hearing and speech. Frequent sitting, standing, walking and occasional bending. Will lift, carry, pull / push, and reach for supplies and on occasion lifting (up to 50 lbs.) while performing various aspects of the job. Will need to climb stairs, climb ladders, lift and move objects, requires manual dexterity and repetitive use of keyboard/computer devices/power tools/machining equipment; Wear safety equipment, such as earplugs, goggles, and steel-toed shoes.
Hours / Special Conditions
12 hour rotating shifts 4 days on and 4 days off; Rotating shifts requires working night shifts; Present to fulfill job duties & meet operational demands/support; Schedule may vary depending on plant operational needs thus flexibility is required which may include long days, evenings, weekends, holidays and overtime; Regular and predictable attendance is an essential function of this position
Envases Commerce, LLC is an Equal Opportunity Employer.