What are the responsibilities and job description for the Electrical Engineer position at Electrotech Manufacturing?
Overview
The electrical engineering owner for a 66 station automation build.
Electrotech International Inc. is hiring a full-time Electrical Engineer to lead the electrical design and documentation for a major industrial automation program spanning two production lines and more than sixty-six stations. You'll produce the complete drawing package, define the control and safety architecture, interface Fanuc robotics and process equipment, and stand behind your design on-site through Factory and Site Acceptance Testing.
This is a hands-on role for an engineer who wants to see their work built, tested, and running, not just drafted. You'll work directly with our technical team and carry your package from concept to commissioning.
66
Automation stations
2
Production lines
ISO 9001
Quality system
Role at a Glance
LocationCocoa, FL
DepartmentElectrical Design
Reports ToEngineering Lead
TravelOccasional, customer site
Program66 stations
Scope & Responsibilities
What you'll deliver.
Full ownership of the electrical design package and its documentation, from the first schematic through as-built sign-off at SAT.
01
Electrical Design
Complete electrical engineering drawing package for all automation stations (66 stations across 2 lines): wiring diagrams, panel layouts, schematics, interconnection drawings, field device location drawings, and pneumatic drawings (if required).
02
IO List
Complete signal listing with signal names, types, I/O card addresses, and device tags for all stations.
03
Motor List
Nameplate data (FLA, HP, Voltage) for all motors, due at PO acceptance (not at shipment).
04
Electrical Bill of Materials
All specified electrical components with original supplier part numbers.
05
Safety Documentation
Safety circuit design documentation, LOTO placard layout drawings, and isolation point identification drawings.
06
Robot & Equipment Interface Drawings
ProfiSafe wiring and electrical interface drawings for all Fanuc robots and all process equipment.
07
FMEA / PFMEA
Failure Mode and Effects Analysis for all critical electrical subsystems, per PEM requirement, included in the documentation package.
08
Start-Up & Commissioning Support
On-site technical resources (the original designer[s]) at the customer site during commissioning; resolve drawing discrepancies and issue real-time redline corrections.
09
FAT Support
Design personnel available during the 6-week FAT for electrical design-related issue resolution.
10
As-Built / Redline Drawings
Fully updated drawing package incorporating all commissioning and FAT/SAT field changes (delivered at SAT completion, included in base scope).
What We're Looking For
Qualifications.
We're looking for an electrical engineer who can carry a complex automation package end to end and stand behind it in the field. Strong candidates bring most of the following:
Send us your application.
If This Role Fits Your Background, Please Prepare
Apply by Email
Email your resume.
Click below to open a pre-addressed, pre-filled email for the Electrical Engineer role. Attach your resume / CV (PDF or Word) and a short background summary, then hit send, and we'll take it from there.
Email Your Resume
Or email us directly at info@electrotechinternational.net
The electrical engineering owner for a 66 station automation build.
Electrotech International Inc. is hiring a full-time Electrical Engineer to lead the electrical design and documentation for a major industrial automation program spanning two production lines and more than sixty-six stations. You'll produce the complete drawing package, define the control and safety architecture, interface Fanuc robotics and process equipment, and stand behind your design on-site through Factory and Site Acceptance Testing.
This is a hands-on role for an engineer who wants to see their work built, tested, and running, not just drafted. You'll work directly with our technical team and carry your package from concept to commissioning.
66
Automation stations
2
Production lines
ISO 9001
Quality system
Role at a Glance
LocationCocoa, FL
- On-Site
DepartmentElectrical Design
Reports ToEngineering Lead
TravelOccasional, customer site
Program66 stations
- 2 lines
Scope & Responsibilities
What you'll deliver.
Full ownership of the electrical design package and its documentation, from the first schematic through as-built sign-off at SAT.
01
Electrical Design
Complete electrical engineering drawing package for all automation stations (66 stations across 2 lines): wiring diagrams, panel layouts, schematics, interconnection drawings, field device location drawings, and pneumatic drawings (if required).
02
IO List
Complete signal listing with signal names, types, I/O card addresses, and device tags for all stations.
03
Motor List
Nameplate data (FLA, HP, Voltage) for all motors, due at PO acceptance (not at shipment).
04
Electrical Bill of Materials
All specified electrical components with original supplier part numbers.
05
Safety Documentation
Safety circuit design documentation, LOTO placard layout drawings, and isolation point identification drawings.
06
Robot & Equipment Interface Drawings
ProfiSafe wiring and electrical interface drawings for all Fanuc robots and all process equipment.
07
FMEA / PFMEA
Failure Mode and Effects Analysis for all critical electrical subsystems, per PEM requirement, included in the documentation package.
08
Start-Up & Commissioning Support
On-site technical resources (the original designer[s]) at the customer site during commissioning; resolve drawing discrepancies and issue real-time redline corrections.
09
FAT Support
Design personnel available during the 6-week FAT for electrical design-related issue resolution.
10
As-Built / Redline Drawings
Fully updated drawing package incorporating all commissioning and FAT/SAT field changes (delivered at SAT completion, included in base scope).
What We're Looking For
Qualifications.
We're looking for an electrical engineer who can carry a complex automation package end to end and stand behind it in the field. Strong candidates bring most of the following:
- Electrical engineering background (degree or equivalent industrial experience)
- Complete electrical design packages: schematics, panel layouts, interconnection & field-device drawings
- IO list development and device tagging for PLC-controlled systems
- Industrial control & power distribution design (UL 508A familiarity a plus)
- Fanuc robot integration and ProfiSafe / functional-safety wiring
- Safety circuit design, LOTO, and isolation documentation
- FMEA / PFMEA on electrical subsystems
- ECAD tools (EPLAN, AutoCAD Electrical, or similar)
- Comfortable providing on-site FAT / SAT and commissioning support
Send us your application.
If This Role Fits Your Background, Please Prepare
- Resume / CV
- Short summary of your electrical design & automation experience
- Relevant project experience (controls, robotics, panel design)
- ECAD / software and technical skills list
Apply by Email
Email your resume.
Click below to open a pre-addressed, pre-filled email for the Electrical Engineer role. Attach your resume / CV (PDF or Word) and a short background summary, then hit send, and we'll take it from there.
Email Your Resume
Or email us directly at info@electrotechinternational.net