What are the responsibilities and job description for the Material Review Board Engineer - Drive Systems Center position at Bell Flight?
We’re more than aviation experts, we’re pioneers. We challenge what’s possible. From breaking the sound barrier to advanced tiltrotor systems. Today, Bell is shaping the future of aviation through specialized engineering. And we want you.
We are developing the future of Army Aviation with the Bell Future Long-Range Assault Aircraft (FLRAA) part of the US Army’s Future Vertical Lift (FVL) modernization effort. We are also developing the Bell 525 Relentless and Bell's High-Speed Vertical Take-Off and Landing (HSVTOL) program, a next generation aircraft.
This position is onsite at the Bell's Drive Systems Center in Grand Prairie, Texas.
Operations Support Material Review Board (MRB) Engineering
This position is for a Material Review Board (MRB) member that works discrepant part evaluation and disposition needs on the production floor and on procured components. The Engineer will be required to disposition defects and oversee the planning, repair, and/or acceptance of flight articles.
The candidate will lead internal and external technical discussions to assess part conditions and repair capabilities as part of the disposition process. They will work closely with engineering support groups – such as drive system design, drives stress, and fatigue – as well as production supervisors and managers to support the assessment of part conditions and execution of repairs, where applicable, assuring MRB approved documents are followed and repairs are done correctly.
The candidate will participate in root cause corrective action teams in the factory and with suppliers as required to reduce recurring defects.
What you’ll be doing as a Material Review Board Engineer:
The candidate is expected to become an MRB board member and be certified to disposition non-conforming drive system components (gears, bearings, shafts, housings, and other supporting components) including the design of original repairs (example: bushings/sleeves/liners) based on fit/form/function at the next assembly.
The candidate is expected to become a member of the Planning Review Board and be responsible for reviewing and approving fabrication planning as well as providing repair dispositions for items that are designated as Controlled Items (Primary, Critical, & Flight Safety Parts).
Additional responsibilities include providing Engineering cross-function support, design interpretation to manufacturing/production teams, and supporting new/existing program development/improvements.
Skills You Bring to This Role:
What we offer you in return:
It’s time to make your mark on the future of aviation. Join us on this mission, and let’s make history together.
We are on a journey to amplify innovation, cultivate purpose and bridge experiences by fostering a culture that is driven by unique perspectives, voices and values.
Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex (including pregnancy and sexual orientation), genetic information or any other characteristic protected by law.This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information.
Recruiting Company
Bell Textron Inc.
Primary Location
US-Texas-Fort Worth
Schedule
Full-time
Job Level
Individual Contributor
Job Type
Standard
Shift
First Shift
Travel
Yes, 5 % of the Time
Relocation
Unavailable
Worksite
Onsite
Job Posting
08/03/2026, 6:13:06 PM
We are developing the future of Army Aviation with the Bell Future Long-Range Assault Aircraft (FLRAA) part of the US Army’s Future Vertical Lift (FVL) modernization effort. We are also developing the Bell 525 Relentless and Bell's High-Speed Vertical Take-Off and Landing (HSVTOL) program, a next generation aircraft.
This position is onsite at the Bell's Drive Systems Center in Grand Prairie, Texas.
Operations Support Material Review Board (MRB) Engineering
This position is for a Material Review Board (MRB) member that works discrepant part evaluation and disposition needs on the production floor and on procured components. The Engineer will be required to disposition defects and oversee the planning, repair, and/or acceptance of flight articles.
The candidate will lead internal and external technical discussions to assess part conditions and repair capabilities as part of the disposition process. They will work closely with engineering support groups – such as drive system design, drives stress, and fatigue – as well as production supervisors and managers to support the assessment of part conditions and execution of repairs, where applicable, assuring MRB approved documents are followed and repairs are done correctly.
The candidate will participate in root cause corrective action teams in the factory and with suppliers as required to reduce recurring defects.
What you’ll be doing as a Material Review Board Engineer:
The candidate is expected to become an MRB board member and be certified to disposition non-conforming drive system components (gears, bearings, shafts, housings, and other supporting components) including the design of original repairs (example: bushings/sleeves/liners) based on fit/form/function at the next assembly.
The candidate is expected to become a member of the Planning Review Board and be responsible for reviewing and approving fabrication planning as well as providing repair dispositions for items that are designated as Controlled Items (Primary, Critical, & Flight Safety Parts).
Additional responsibilities include providing Engineering cross-function support, design interpretation to manufacturing/production teams, and supporting new/existing program development/improvements.
Skills You Bring to This Role:
- Bachelor’s degree in Mechanical Engineering or Aerospace Engineering or relevant Engineering field is required.
- Minimum of 5 years of Engineering experience in dynamic component or drive system fabrication within the aerospace or automotive industries with an understanding of fabrication processes and the engineering data that defines the product and inspection and MRB systems for the repair metallic components.
- Hands on experience trouble shooting fabrication problems and process improvements in an aerospace manufacturing environment for machined metallic parts.
- Knowledge of Drive Systems design principles.
- Experience reading blue prints, material specifications, process specifications and government regulations pertaining to the repair of discrepant parts. Working knowledgeable of GD&T requirements is required.
- Experience working in an aerospace or automotive environment, focused on mechanical components such as gears, bearings, shafting, etc.
- Experience working in a precision manufacturing environment, focused on mechanical component manufacturing processes such as metal machining, heat treatments, and other specialized processes.
- Strong analytical and design ability.
- Ability to organize and prioritize a variety of activities and tasks while dealing with change.
- Ability to take lead on projects/tasks of varying complexity and drive solutions working with multiple groups/suppliers.
- Success working in a team environment and articulating technical data and concepts to a wide audience of individuals of different technical backgrounds. Must be action/results oriented.
- Excellent written, verbal, and presentation skills. Must be able to build and maintain effective relationships with customers, internal and external suppliers, and brief leaders/customers.
- Experience with SAP/CAMS systems that are used in component fabrication, disposition, and repairs is preferred.
What we offer you in return:
- You’ll be off every other Friday with our 9/80 work schedule
- 80 hours of Personal Time Off (PTO)
- 120 hours Vacation time
- 12-13 paid holidays per year
- 6 weeks parental leave
- Tuition reimbursement
- Competitive salary
- Comprehensive health insurance
- On-site clinic, pharmacy, physical therapy, and licensed counselor
- Access to more than 11 Employee Resource Groups
- And so much more
It’s time to make your mark on the future of aviation. Join us on this mission, and let’s make history together.
We are on a journey to amplify innovation, cultivate purpose and bridge experiences by fostering a culture that is driven by unique perspectives, voices and values.
Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex (including pregnancy and sexual orientation), genetic information or any other characteristic protected by law.This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information.
Recruiting Company
Bell Textron Inc.
Primary Location
US-Texas-Fort Worth
Schedule
Full-time
Job Level
Individual Contributor
Job Type
Standard
Shift
First Shift
Travel
Yes, 5 % of the Time
Relocation
Unavailable
Worksite
Onsite
Job Posting
08/03/2026, 6:13:06 PM