Demo

Blender - Forsyth, MO

Archer Daniels Midland
Forsyth, MO Full Time
POSTED ON 10/15/2026
AVAILABLE BEFORE 8/14/2027
Blender - Forsyth, MO

SUMMARY: Prepare different formulas in order to manufacture nutritional supplements. There will be opportunities for cross-training in the Encapsulation Department, Tableting Department, and the Packaging Department.

ESSENTIAL DUTIES AND RESPONSIBILITIES:
Management retains the discretion to add to or change the duties of this position at any time.
Consistent attendance is critical to the successful performance of this role. Essential duties include, but are not limited to, the following:
  • Assist Blending Team Lead.
  • Read and comprehend Blending Bill of Material Sheets.
  • Properly read and comprehend raw ingredient names and lot numbers.
  • Properly weigh and document batch and lot numbers from raw material onto Bill of Material Sheets.
  • Properly prepare and clean barrels for use in Blending.
  • Operate and read floor and table top scales.
  • Charge and discharge powder from 60V and 20V mixers.
  • Clean the Blending room and all machines and utensils associated with the Blending area.
  • Support production in maintaining the cleanliness of the production rooms as needed.
  • Properly clean and prepare machines for the next formula of powder.
  • Remove, clean and reinstall proper change parts on production equipment to expedite subsequent operations.
  • Maintain a safe and clean work environment.
  • Ensure proper PPE is utilized.
EQUIPMENT USED:
  • The equipment listed is representative of what an employee must be able to operate to perform the essential functions of this job.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • 60V mixer, 20V mixers, table top scales, 2-wheel dolly, pallet jack, computer, PPE, and a forced air respirator.
EDUCATION AND/OR EXPERIENCE:
  • High school diploma, GED or equivalent experience.
  • Basic computer skills are necessary.
LANGUAGE SKILLS:
  • Ability to read and comprehend simple instructions, short correspondence, and memos.
  • Ability to write simple correspondence.
  • Ability to effectively present information in one-on-one and small group situations.
MATHEMATICAL SKILLS:
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals.
REASONING ABILITY:
  • Ability to apply common sense understanding to carry out instructions furnished in written, oral, diagram, or schedule form.
  • Ability to deal with problems involving several concrete variables in standardization situations.
OTHER SKILLS & ABILITIES: 
  • Ability to work independently with minimal supervision.
  • Must have manual dexterity, attention to detail and the ability to follow directions.
  • Must be able to multi-task and work at a fast pace.
  • Must understand and conform to all safety guidelines.
PHYSICAL DEMANDS:
  • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle or feel objects, tools, or controls; and talk or hear.
  • The employee frequently is required to walk and reach with hands and arms.
  • The employee is occasionally required to sit and twist, stoop, kneel and crouch.
  • Specific vision abilities required by this job include close vision and color vision.
  • Occasionally required to climb stairs or portable stairs.
  • Repetitive hand movements are required. 
  • Personal Protection Equipment is required including a forced air respirator.
  • The employee must be able to lift up to 50 pounds and move up to 2500 pounds with the appropriate equipment. 
  • When loading the barrels for mixing, the employee is required to load up to 480 pounds for the 60V Mixer and up to 160 pounds for the 20V Mixer.
WORK ENVIRONMENT:
  • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
  • The noise level in the work environment is usually moderately noisy.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Other duties may be assigned by management.
ADM requires the successful completion of a background check. 

REF:111535BR

Salary.com Estimation for Blender - Forsyth, MO in Forsyth, MO
$38,977 to $50,167
If your compensation planning software is too rigid to deploy winning incentive strategies, it’s time to find an adaptable solution. Compensation Planning
Enhance your organization's compensation strategy with salary data sets that HR and team managers can use to pay your staff right. Surveys & Data Sets

What is the career path for a Blender - Forsyth, MO?

Sign up to receive alerts about other jobs on the Blender - Forsyth, MO career path by checking the boxes next to the positions that interest you.
Income Estimation: 
$46,351 - $61,722
Income Estimation: 
$53,120 - $69,174
Income Estimation: 
$50,113 - $64,377
Income Estimation: 
$61,656 - $78,069
Income Estimation: 
$59,875 - $77,824
Income Estimation: 
$39,994 - $52,192
Income Estimation: 
$50,144 - $66,413

Sign up to receive alerts about other jobs with skills like those required for the Blender - Forsyth, MO.

Click the checkbox next to the jobs that you are interested in.

  • Food Quality Inspection Skill

    • Income Estimation: $70,778 - $99,774
    • Income Estimation: $71,257 - $100,193
  • Menu Planning Skill

    • Income Estimation: $69,527 - $89,599
    • Income Estimation: $71,244 - $101,987
Employees: Get a Salary Increase
View Core, Job Family, and Industry Job Skills and Competency Data for more than 15,000 Job Titles Skills Library

Job openings at Archer Daniels Midland

  • Archer Daniels Midland Canada, KY
  • Position: Electrical Technician Location: Candiac, Quebec Department: Operations Position Type: Full-Time | On-Site | Day Shift Compensation: $47.01/hour A... more
  • 7 Days Ago

  • Archer Daniels Midland Litchfield, MN
  • Production Operator - Litchfield, MN Job Description To prepare all raw dry materials for the process of spray drying following applicable SOP’s and GMP’s.... more
  • 7 Days Ago

  • Archer Daniels Midland Colby, WI
  • Purchasing Coordinator - Colby, WI Position Summary The Purchasing Coordinator is responsible for supporting purchasing activities and ensuring ingredients... more
  • 7 Days Ago

  • Archer Daniels Midland St Louis, MO
  • Fleet Deckhand - St. Louis, MO This is a full-time, non-exempt level position. Position Summary: ADM is seeking a laborer to work as a deckhand under the d... more
  • 7 Days Ago


Not the job you're looking for? Here are some other Blender - Forsyth, MO jobs in the Forsyth, MO area that may be a better fit.

  • ADM Forsyth, MO
  • Blender - Forsyth, MO SUMMARY: Prepare different formulas in order to manufacture nutritional supplements. There will be opportunities for cross-training i... more
  • 2 Months Ago

  • ADM Forsyth, MO
  • QA Technician - Forsyth, MO This is a full-time, hourly position. Mon-Thurs 2:45pm – 1:15am SUMMARY: Performs line inspections and quality control function... more
  • 8 Days Ago

AI Assistant is available now!

Feel free to start your new journey!