What are the responsibilities and job description for the Sr. Program Quality Engineer position at Amtec, LLC?
JOB REQUIREMENTS: JOB TITLE: Sr. Program Quality Engineer DEPARTMENT:
Medium Cannon Caliber (MCC) Engineering REPORTS TO: MCC Program
Operations Director POSITION DESCRIPTION: This position will provide
Quality Engineering and Mission Assurance support within the Medium
Cannon Caliber Program. This may include production line support at
internal supplier locations, supplier inspection and monitoring,
identifying contractual Quality requirements, preparing quality program
plans, inspection procedures and quality requirements flow-down,
internal supplier process monitoring, application of lean/six-sigma
tools, drawing reviews, customer interface/reports/submittals, and
Reviewing And Analyzing Product Acceptance Data. ESSENTIAL DUTIES AND
RESPONSIBILITIES: Provides Quality Engineering support for
program/project teams. Ensure conformance to all quality related
customer contract requirements. Identify and flow down supplier related
quality requirements. Perform on-site monitoring of manufacturing lines
and supplier production processes. Develop customer quality related
documentation submissions. Develop and implement internal and supplier
inspection requirements. Support receiving and in-process inspection
team questions. Lead the Material Review Board and Corrective Action
Board for the site. Lead any Corrective Action activities in conjunction
with the Corrective Action Board. Participate in Failure Reporting,
Analysis and Corrective Action System teams. Perform statistical
analysis on product yield/SPC/key characteristics data. Develop and
communicate program Quality Plans. Provide quality input to
manufacturing processes including inspection and determining key
characteristics. Review supplier quality documentation for approval,
such as Inspection Plans, Test Plans, Control Plans, Measurement System
Documentation, First Article Inspection Reports, Physical Configuration
Audit reports, Inspection data etc. Collaborate with engineering and
manufacturing teams to help integrate quality requirements into product
design and production processes. Monitor program performance metrics and
assist in reporting quality trends and issues to senior management.
Participate in program reviews and provide quality-related input and
recommendations. Support customer and regulatory audits, including
preparation and follow-up activities. Ensure that quality documentation
is accurate, complete, and up to date. Lead and facilitate continuous
improvement initiatives to enhance product quality and process
efficiency. Manage site Quality Management System and processes.
SUPERVISORY RESPONSIBILITY: This position has no direct supervisory
responsibilities. POSITION TYPE: This is a Salary Exempt full-time
position. TRAVEL: Travel (15-20% of work time). \*\*\*\*\* OTHER
EXPERIENCE AND QUALIFICATIONS: REQUIRED QUALIFICATIONS, EDUCATION, AND
EXPERIENCE: Bachelor of Science degree in engineering/applied sciences
(math, physics, etc.) plus 8-12 years of Quality Engineering Experience;
or Master\'s degree plus 5-8 years of experience Ability to obtain a DoD
Secret Clearance which requires US Citizenship as a prerequisite. Strong
background in inspection equipment, techniques and general knowledge of
Metrology and Calibration Ability to work with multiple disciplines to
create and implement quality/inspection requirements for new products.
Solid understanding of Drawings and Geometric Dimensioning and
Tolerancing Command of root cause determination and corrective action
activities Strong interpersonal and communications skills, presentation
skills and an excellent statistical analysis ability Solid Quality Tools
skills (Statistics, DOE, FMEA, MSA) Excellent people skills, with proven
ability to work with internal customers and suppliers on quality
improvement activities. Strong understanding of Quality Management
Systems with ISO 9001:2015 compliance. High Energy, results oriented,
self-motivated/self-rel ant, team player. Excellent problem-solving and
analytical skills. PREFERRED QUALIFICATIONS: Certification as a Quality
Engineer (CQE) and/or Six Sigma Green Belt/Black Belt. Experience in a
Defense contract manufacturing environment. Solid Understanding of
Design Failure Mode Effect Analysis (DFMEA) and Process Failure Mode
Effect Analysis (PFMEA). Manufacturing background desired including a
familiarity with material science, machining processes,
fine-electromechanical assembly, or electronics assemblies, automated
assembly and energetic materials. Familiarity with regulatory
Requirements And Standards Relevant To The Defense Industry. Experience
with supplier quality management and development. Experience with the
Material Review Board (MRB) process. Experience with interpreting and
Presenting Quality Metrics. Experience Working With Energetics And Other
hazardous products. \*\*\*\*\* APPLICATION INSTRUCTIONS: Apply In
Person: AMTEC Corporation 4230 Capital Circle Janesville, WI 53546 Mail
a Rsum: AMTEC Corporation 4230 Capital Circle Janesville, WI 53546 Attn:
HR E-Mail a Rsum: hr@amteccorp.net Other: AMTEC Corporation is an Equal
Opportunity Employer (EOE). Qualified females, minorities, and special
disabled veterans and other veterans are encouraged to apply.
Medium Cannon Caliber (MCC) Engineering REPORTS TO: MCC Program
Operations Director POSITION DESCRIPTION: This position will provide
Quality Engineering and Mission Assurance support within the Medium
Cannon Caliber Program. This may include production line support at
internal supplier locations, supplier inspection and monitoring,
identifying contractual Quality requirements, preparing quality program
plans, inspection procedures and quality requirements flow-down,
internal supplier process monitoring, application of lean/six-sigma
tools, drawing reviews, customer interface/reports/submittals, and
Reviewing And Analyzing Product Acceptance Data. ESSENTIAL DUTIES AND
RESPONSIBILITIES: Provides Quality Engineering support for
program/project teams. Ensure conformance to all quality related
customer contract requirements. Identify and flow down supplier related
quality requirements. Perform on-site monitoring of manufacturing lines
and supplier production processes. Develop customer quality related
documentation submissions. Develop and implement internal and supplier
inspection requirements. Support receiving and in-process inspection
team questions. Lead the Material Review Board and Corrective Action
Board for the site. Lead any Corrective Action activities in conjunction
with the Corrective Action Board. Participate in Failure Reporting,
Analysis and Corrective Action System teams. Perform statistical
analysis on product yield/SPC/key characteristics data. Develop and
communicate program Quality Plans. Provide quality input to
manufacturing processes including inspection and determining key
characteristics. Review supplier quality documentation for approval,
such as Inspection Plans, Test Plans, Control Plans, Measurement System
Documentation, First Article Inspection Reports, Physical Configuration
Audit reports, Inspection data etc. Collaborate with engineering and
manufacturing teams to help integrate quality requirements into product
design and production processes. Monitor program performance metrics and
assist in reporting quality trends and issues to senior management.
Participate in program reviews and provide quality-related input and
recommendations. Support customer and regulatory audits, including
preparation and follow-up activities. Ensure that quality documentation
is accurate, complete, and up to date. Lead and facilitate continuous
improvement initiatives to enhance product quality and process
efficiency. Manage site Quality Management System and processes.
SUPERVISORY RESPONSIBILITY: This position has no direct supervisory
responsibilities. POSITION TYPE: This is a Salary Exempt full-time
position. TRAVEL: Travel (15-20% of work time). \*\*\*\*\* OTHER
EXPERIENCE AND QUALIFICATIONS: REQUIRED QUALIFICATIONS, EDUCATION, AND
EXPERIENCE: Bachelor of Science degree in engineering/applied sciences
(math, physics, etc.) plus 8-12 years of Quality Engineering Experience;
or Master\'s degree plus 5-8 years of experience Ability to obtain a DoD
Secret Clearance which requires US Citizenship as a prerequisite. Strong
background in inspection equipment, techniques and general knowledge of
Metrology and Calibration Ability to work with multiple disciplines to
create and implement quality/inspection requirements for new products.
Solid understanding of Drawings and Geometric Dimensioning and
Tolerancing Command of root cause determination and corrective action
activities Strong interpersonal and communications skills, presentation
skills and an excellent statistical analysis ability Solid Quality Tools
skills (Statistics, DOE, FMEA, MSA) Excellent people skills, with proven
ability to work with internal customers and suppliers on quality
improvement activities. Strong understanding of Quality Management
Systems with ISO 9001:2015 compliance. High Energy, results oriented,
self-motivated/self-rel ant, team player. Excellent problem-solving and
analytical skills. PREFERRED QUALIFICATIONS: Certification as a Quality
Engineer (CQE) and/or Six Sigma Green Belt/Black Belt. Experience in a
Defense contract manufacturing environment. Solid Understanding of
Design Failure Mode Effect Analysis (DFMEA) and Process Failure Mode
Effect Analysis (PFMEA). Manufacturing background desired including a
familiarity with material science, machining processes,
fine-electromechanical assembly, or electronics assemblies, automated
assembly and energetic materials. Familiarity with regulatory
Requirements And Standards Relevant To The Defense Industry. Experience
with supplier quality management and development. Experience with the
Material Review Board (MRB) process. Experience with interpreting and
Presenting Quality Metrics. Experience Working With Energetics And Other
hazardous products. \*\*\*\*\* APPLICATION INSTRUCTIONS: Apply In
Person: AMTEC Corporation 4230 Capital Circle Janesville, WI 53546 Mail
a Rsum: AMTEC Corporation 4230 Capital Circle Janesville, WI 53546 Attn:
HR E-Mail a Rsum: hr@amteccorp.net Other: AMTEC Corporation is an Equal
Opportunity Employer (EOE). Qualified females, minorities, and special
disabled veterans and other veterans are encouraged to apply.
